Mackilroy Posted July 24, 2011 Share Posted July 24, 2011 Typing this post from Lion now, still a few issues to work out (sound and Ethernet related) but it works! Link to comment Share on other sites More sharing options...
richardsim7 Posted July 24, 2011 Share Posted July 24, 2011 Typing this post from Lion now, still a few issues to work out (sound and Ethernet related) but it works! Did you ever have a problem like me? I notice we have very similar setups :\ Link to comment Share on other sites More sharing options...
Mackilroy Posted July 24, 2011 Share Posted July 24, 2011 No, I didn't experience any issues such as that. Mine were closer to what The Matrix had. Link to comment Share on other sites More sharing options...
richardsim7 Posted July 24, 2011 Share Posted July 24, 2011 Well, as a follow up to my problem. Somehow pulling out all the hard drives other than the one I was installing to fixed the issue I don't know if it was my Time Machine or Windows drive but oh well Installing Kakewalk went fine. Got graphics enabled as per instructions. I got sound and network working using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] so it's not quite an all in one solution but pretty damn good! THANK YOU!! Link to comment Share on other sites More sharing options...
JayW8888 Posted July 25, 2011 Share Posted July 25, 2011 Installed Lion with Kakewalk 4 and all works fine with a few work arounds. - I did not do a fresh install as per the PDF instructions. Rather I let the Lion USB installation update the SL installation. - Upon completion and after running Kakewalk 4 on my HDD, my dual display reverted to single display. I copied the SL DSDT.aml file from /Extras to the Lion install and restarted. Both my displays now work fine again. Overall, took about the best of two hours to get it up and running. It seems a little bit faster but it could be just my imagination. Everything works except for Facetime.. which oddly says it cannot register. This seems to be a common problem if I google it. Link to comment Share on other sites More sharing options...
Mackilroy Posted July 25, 2011 Share Posted July 25, 2011 Well, as a follow up to my problem. Somehow pulling out all the hard drives other than the one I was installing to fixed the issue I don't know if it was my Time Machine or Windows drive but oh well Installing Kakewalk went fine. Got graphics enabled as per instructions. I got sound and network working using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] so it's not quite an all in one solution but pretty damn good! THANK YOU!! I don't have sound and Ethernet working at the moment, and whenever I attempt to use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] my computer kernel panics. You experience anything similar? Link to comment Share on other sites More sharing options...
alucard_xs Posted July 25, 2011 Share Posted July 25, 2011 well, the usb key launch great but it fails during installation of Lion ... maybe it's from the usb key 8 Gb ? Link to comment Share on other sites More sharing options...
komodo_1 Posted July 25, 2011 Share Posted July 25, 2011 Hi and thanks for this nice app. I see on working mob's page that this works on ep45-ds3l. Does it works on ep45c-ds3r too I think... right? thanks again Hi mrjanek! Congrats for Kakewalk 4!! Is there any chance to use it for a GA-EP45C-DS3R Mobo Retail Lion Installation? Please Let me know! Bye! Link to comment Share on other sites More sharing options...
richardsim7 Posted July 25, 2011 Share Posted July 25, 2011 I don't have sound and Ethernet working at the moment, and whenever I attempt to use [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] my computer kernel panics. You experience anything similar? Nope worked fine for me. However [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] is just a big collection of kexts, maybe you could dive in and extract the kexts you need and install them manually? Link to comment Share on other sites More sharing options...
Giakys Posted July 25, 2011 Share Posted July 25, 2011 ehi mrjanek with last edition of kake walk,i istalled snow leopard on my ud5 with ud7 setting also this time is same or u are changed something? thx Link to comment Share on other sites More sharing options...
Mackilroy Posted July 25, 2011 Share Posted July 25, 2011 Nope worked fine for me. However [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] is just a big collection of kexts, maybe you could dive in and extract the kexts you need and install them manually? Heh, after I wrote that I decided to try a few things – I do have sound and Ethernet working now, though I used VoodooHDA for sound and so far it's given me one kernel panic on boot. Otherwise seems to be working pretty well. Link to comment Share on other sites More sharing options...
Dam Posted July 25, 2011 Share Posted July 25, 2011 I'm on Lion OSX with EP45C-DS3R. Everything work fine. Just follow the kakewalk instructions by choosing "EP45-DS3L" form the menu of Kakewalk. Cheers. Then let me know for DSDT and Audio problem and I'll try to help. Hi and thanks for this nice app.I see on working mob's page that this works on ep45-ds3l. Does it works on ep45c-ds3r too I think... right? thanks again Link to comment Share on other sites More sharing options...
CooSee Posted July 25, 2011 Share Posted July 25, 2011 @ mrjanek worked for me, but: the HDs shown as ' external ( Orange )' during install. IMO ' IOAHCIBlockStorageInjector.kext ' should solve this. i have modified ' DSDT ', ' com.Apple.boot.plist etc... and i add this to the Stick, but after install Kakewalk.app, it's overwriting all the stuff ! and the ' npci=0×2000 ' Kernel Flag is set by default; is there any harm, because i don't need this flag ? is it possible that Kakewalk asks the User for adding modified stuff to the Stick? thx for Kakewalk anyway CooSee ' Ya Link to comment Share on other sites More sharing options...
asterix86 Posted July 25, 2011 Share Posted July 25, 2011 Works fine with Asus P5Q changing DSDT.aml Link to comment Share on other sites More sharing options...
Legends Posted July 25, 2011 Share Posted July 25, 2011 Would like to see Kakewalk working under Nvidia MCP65M Amd Hammer Link to comment Share on other sites More sharing options...
alucard_xs Posted July 25, 2011 Share Posted July 25, 2011 weel, installation is ok but when after the second part (Installing on PC) after kextutiliy, it reboots but hangs at PCI configuration utility ... help ? Link to comment Share on other sites More sharing options...
komodo_1 Posted July 25, 2011 Share Posted July 25, 2011 (edited) DSDT.rar Hi all again @Dam As I asked in this post too: http://www.insanelymac.com/forum/index.php...d=1722478 Do you think SL's dsdt could fit fine? Or need to create a new one with dsdt_autopatcher? Are you using 5.1 audio or so? If yes, with digital cable or normal one? Thanks in advance and I'll let you know asap. I got to decide how to move at this point Cheers p.s i've just discovered we had some writing in 2009 for OS 10.5 audio stuffs I'm on Lion OSX with EP45C-DS3R.Everything work fine. Just follow the kakewalk instructions by choosing "EP45-DS3L" form the menu of Kakewalk. Cheers. Then let me know for DSDT and Audio problem and I'll try to help. Edited July 26, 2011 by komodo_1 Link to comment Share on other sites More sharing options...
pags2 Posted July 25, 2011 Share Posted July 25, 2011 No one any idea how to move on with my installation ?I restarted after Kakewalk 4 installation on HD i see the new loader on screen and stuck to the apple ... When i start -v in verbose i can it is stuck on pci configuration begin please help I was unable to get the kakewalk installed properly, but if you put [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8 on your USB, then you can use that to install all the necessary post install items to get a boot into the system from the HD. Make sure you tick on/off the relevant items and then install. It worked for me. Do not install Kakewalk after you configure your system. Drag [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to your desktop and use that. Link to comment Share on other sites More sharing options...
Extremador Posted July 25, 2011 Share Posted July 25, 2011 I guess I can't install it at all with my EVGA X58 SLI LE Link to comment Share on other sites More sharing options...
Dam Posted July 25, 2011 Share Posted July 25, 2011 Hi Komodo_1, Nice too read you again ^^, how are you? So: 1. Use DSDT Auto-Patcher to create the DSDT, put it in Extra. 2. Use IOAHCIBlockStorageInjector to solve the Orange HD Icons. 3. If you use NVIDIA 8XXX/9XXX series, remove AppleUpstreamUserClient.kext form S/L/E or just backup it (For some strange mouse lag behaviors) and use <key>GraphicsEnabler</key><string>Yes</string> in the com.apple.Boot.plist AUDIO (I use the normal audio, not 5,1 - maybe you could try) Just put ALC885_889a.kext in E/E and then foliow the instructions inside the Readme file. ALC889a -> ALC889a.zip That's all. Let me know if you have any problems. D. Hi all again @Dam As I asked in this post too: http://www.insanelymac.com/forum/index.php...d=1722478 Do you think SL's dsdt could fit fine? Or need to create a new one with dsdt_autopatcher? Are you using 5.1 audio or so? If yes, with digital cable or normal one? Thanks in advance and I'll let you know asap. I got to decide how to move at this point Cheers p.s i've just discovered we had some writing in 2009 for OS 10.5 audio stuffs Link to comment Share on other sites More sharing options...
Junkhead78 Posted July 25, 2011 Share Posted July 25, 2011 Is there anything i need to do before installing this next to a windows 7 install on a seperate drive that is already running on my PC? Should i disconnect that drive while installing this? I have not done any hackintosh stuff in a couple years. I ran Ideneb pretty flawlessly though on my system for awhile! Link to comment Share on other sites More sharing options...
richardsim7 Posted July 25, 2011 Share Posted July 25, 2011 Is there anything i need to do before installing this next to a windows 7 install on a seperate drive that is already running on my PC? Should i disconnect that drive while installing this? I have not done any hackintosh stuff in a couple years. I ran Ideneb pretty flawlessly though on my system for awhile! Yes, it's always the safe option Link to comment Share on other sites More sharing options...
Dasoslukos Posted July 26, 2011 Share Posted July 26, 2011 I am having this same problem as well. Any advice an how to correct it? Thanks. mrjanek, Im having an issue where I cannot create the kakewalk 4 usb boot. Im getting the following error "Could not rename drive. Make sure you no other volumes named 'Mac OSX Base System' are mounted" The install basically fails at this point. I have tried repeating it again by re-formatting my usb stick first and changing the name to something simple such as lion or kakewalk. Another user named MadNachos in your discussion forum on your website is also reporting the same issue. Any advise? I can upload the log when I return home this evening. Thanks. Doug (p.s my system has been rock solid based on your earlier kakewalk install). Im curious how to you handle upgrades from a system running an older kakewalk install with an older chameleon ? Do you replace the boot loaded and keep the users dst files? or replace both? Link to comment Share on other sites More sharing options...
alucard_xs Posted July 26, 2011 Share Posted July 26, 2011 wELL, i really can't boot lion after i launch the part 2 of Kakewalk, it just hangs at the pci configuration stuff, it semmes it's a boot loader problem ... can somebody help ? With [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8 i have an error ... thanks Link to comment Share on other sites More sharing options...
pags2 Posted July 26, 2011 Share Posted July 26, 2011 wELL, i really can't boot lion after i launch the part 2 of Kakewalk, it just hangs at the pci configuration stuff, it semmes it's a boot loader problem ... can somebody help ? With [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8 i have an error ... thanks Just type at the boot prompt: -v -x PCIRootUID=1 npci=0x2000 After Installation Edit the com.apple.boot.plist and add to the Kernel Flags String: arch=i386 npci=0x2000 Link to comment Share on other sites More sharing options...
Recommended Posts