SuperHack Posted July 10, 2011 Share Posted July 10, 2011 Trying a clean install of lion following the guide by "Still Will Fan". Originally I ran into the PCI configuration begin problem, but I fixed that by using a fixed "IOPCIfamily.kext" which I copied onto the installation drive replacing the original. While booting into installation drive it stops at: DMOS has arrived nstat_lookup_entry failed: 2 nstat_lookup_entry failed: 2 Any idea what could causing this? System specs are GA-X58A-UD3R Rev. 2.0 i7 950 EVGA GTS 450 Link to comment Share on other sites More sharing options...
CooSee Posted July 10, 2011 Share Posted July 10, 2011 i'am gettings this, too, but booting anyway, so IMHO this is not the problem. are you using DSDT.aml for your System ? CooSee ' Ya Link to comment Share on other sites More sharing options...
SuperHack Posted July 11, 2011 Author Share Posted July 11, 2011 i'am gettings this, too, but booting anyway, so IMHO this is not the problem. are you using DSDT.aml for your System ? CooSee ' Ya I was just using the DSDT from my system under SL, which was working fine. Don't I just get the latest one here? http://www.tonymacx86.com/dsdt.php Link to comment Share on other sites More sharing options...
SuperHack Posted July 11, 2011 Author Share Posted July 11, 2011 And don't know if this is relevant or not, but I have the bootable Lion install on a USB, not on a seperate partition like the guide I am following. Erased and tried again, and still no luck More ideas please? Link to comment Share on other sites More sharing options...
kgtlrt Posted September 17, 2011 Share Posted September 17, 2011 Trying a clean install of lion following the guide by "Still Will Fan". Originally I ran into the PCI configuration begin problem, but I fixed that by using a fixed "IOPCIfamily.kext" which I copied onto the installation drive replacing the original. While booting into installation drive it stops at: DMOS has arrived nstat_lookup_entry failed: 2 nstat_lookup_entry failed: 2 Any idea what could causing this? System specs are GA-X58A-UD3R Rev. 2.0 i7 950 EVGA GTS 450 I don't know if this can help you, but I have the same problem in my GA-P55-UD3L Zotac GT220 4 GB I can boot to Lion with -v npci=0x2000 GraphicsEnabler=No And now I can boot normally before copy my Extra folder of my SL10,6,6 in the same PC. Link to comment Share on other sites More sharing options...
aspin Posted September 20, 2011 Share Posted September 20, 2011 -v npci=0x2000 GraphicsEnabler=No Saved my ass Had the same issue with nstat stopping the installer from loading but those flags helped it through Link to comment Share on other sites More sharing options...
Recommended Posts