Jump to content

Dell Vostro 3550 - need help with DSDT


mark_in_2k
 Share

9 posts in this topic

Recommended Posts

Hey DSDT experts. I've read, re-read and tried to understand DSDT editing but it's beyond me!

 

Can someone give me some pointers on editing my Dell Vostro 3550 DSDT.aml (download here).

 

I've been spoilt by my desktop hackintosh and it's DSDT which didn't need any editing.

 

Any help is much appreciated :D

Link to comment
Share on other sites

Wow, thanks for the fast reply MaLd0n!

 

I've attempted to combo update to 10.6.8 after installing retail SL but it's not working out as good as I'd hoped. I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], with your DSDT. The update works fine, but on reboot I'm getting some errors and can't make it to the desktop.

 

I've tried -x without success. It seems to hang on ALPSGlide trackpad so I have that to figure out.

Link to comment
Share on other sites

Wow, thanks for the fast reply MaLd0n!

 

I've attempted to combo update to 10.6.8 after installing retail SL but it's not working out as good as I'd hoped. I used [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], with your DSDT. The update works fine, but on reboot I'm getting some errors and can't make it to the desktop.

 

I've tried -x without success. It seems to hang on ALPSGlide trackpad so I have that to figure out.

PS2 kexts

try ApplePS2

Link to comment
Share on other sites

Hey DSDT experts. I've read, re-read and tried to understand DSDT editing but it's beyond me!

 

Can someone give me some pointers on editing my Dell Vostro 3550 DSDT.aml (download here).

 

I've been spoilt by my desktop hackintosh and it's DSDT which didn't need any editing.

 

Any help is much appreciated :(

 

 

can u post how did u get Vostro 3550 installed ?

Link to comment
Share on other sites

can u post how did u get Vostro 3550 installed ?

No problem. It's still a work in progress, but thanks to Maldon and his edited DSDT, it's getting easier!

 

  1. Use latest version of [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Once [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] has loaded, switch the disc to SL Retail, press F5 to refresh the disc in the drive, then select SL Retail and enter -v before pressing Enter.
  2. Install SL on the partition of your choice.
  3. Restart after the install and re-insert the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] disc. This time select your hard disk installation of SL, again using -v
  4. Run through the SL setup screens before getting to the desktop.
  5. Download Combo Update 10.6.6 and the latest [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and copy your dsdt.aml onto the desktop.
  6. Reboot into safemode using -x -v
  7. Once loaded, delete kext IOPlatformPlugin.kext (this maybe optional but I always got a kernel panic when trying to combo update).
  8. Run myfix (Google for it) and let it repair permissions, caches, etc.
  9. Run your 10.6.6 combo update. Once finished, DON'T restart.
  10. Run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and select UserDSDT install. This was all I chose to get the basics running first.
  11. Repair permissions with myfix. For some reason I have a lot of problems using Multibeasts kext repair scripts under "System Utiliies". It always fails so I use myfix.
  12. Reboot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] in the drive still and then choose your SL install. You should now be at 10.6.6

Things that work:

  • Ethernet
  • USB ports (not tested the USB3 port)
  • Webcam
  • Card reader

Not working:

  • Sound almost works, but it crackly (not played with any kexts yet)
  • Wifi
  • QE/CI or native resolution (that may work with 10.6.8)

Not tested

  • Touchpad (have a mouse connected)
  • HDMI / VGA out

Link to comment
Share on other sites

what macbook smbios.plist are you using ? likely 8,1

maldon. does it need RTC 0x02 ? i think it can ride with 0x08 or 0x06

				Device (RTC)
			{
				Name (_HID, EisaId ("PNP0B00"))
				Name (_CRS, ResourceTemplate ()
				{
					IO (Decode16,
						0x0070,			 // Range Minimum
						0x0070,			 // Range Maximum
						0x01,			   // Alignment
						0x08,			   // Length
						)
				})
			}

Link to comment
Share on other sites

what macbook smbios.plist are you using ? likely 8,1

maldon. does it need RTC 0x02 ? i think it can ride with 0x08 or 0x06

 

you have a problem with that?

I do not have

works the same way

Link to comment
Share on other sites

 Share

×
×
  • Create New...