Posted 09 July 2011 - 11:21 PM
Here on this Topic you can post your Lion GM test results as well so we can compare it with Snow Results
according to the same System configuration.
LION GM 64Bit
System identifier: iMac11,1
i7 860 2,8GHz
P55A UD3 Bios F11
8GB DDR3 1333 RAM
INNO3D GTX 285
Dual Monitor 2x24"
All test done with 1920 x 1080:
NVIDIA GeForce GTX 285 OpenGL Engine
Vector Single Core CPU:___________________12
Vector Multi Core CPU:____________________46
GeForce GTX 285:_______________________ 367
Hybrid Multi Core CPU+GPU:_______________77
SMALL OPEN GL FPS Bench V_1.3.1
Scene 1: Irrlicht Engine - SpecialFX Open GL 2.1 (1024x768) MIN:404 MAX:468
Scene 2: Lighting Engine- Open GL 2.1 (1024x768) MIN:884 MAX:2196
OpenGL_Lion64bit.png 207.41KB 76 downloads
Geekbench64.png 183.92KB 68 downloads
Cinebench_GPU.png 222.1KB 67 downloads
Cinebench_CPU.png 216.62KB 33 downloads
Xbench1.3.png 233.41KB 76 downloads
Smalux_Sponza_cpu_gpu.png 944.92KB 37 downloads
Smalux_Sponza_GPU.png 976.41KB 7 downloads
SponzaUltra.png 65.25KB 17 downloads LuxbalUltra.png 66.03KB 10 downloads
LuxballMid.png 65.4KB 7 downloads Benchmark_OpenCL.png 105.67KB 11 downloads
Hard disk AJA Test
AJA_Lion.png 76.13KB 24 downloads
The Snow Leopard Test results from the same system can be seen here:
Snow Test Results
Posted 10 July 2011 - 01:05 PM
I am using Model identifier iMac11.1:
Mac_Identifier.png 681.47KB 47 downloads
But i was able to install CUDA driver on my Lion GM without that System check!
Usually, you must have identifier MacPro3.1 or 4.1 at least to be able to do that on Snow Leopard!
As usual, NVIDIA come again to late with the newest Cuda driver compatible with newest 100 series
Lion driver. We must wait again.....
Posted 11 July 2011 - 04:51 AM
Posted 11 July 2011 - 07:17 AM
I recalled reading something before about OpenGL performance on NVIDIA cards and using a MacPro SMBIOS instead, so I switched over to a MacPro 3,1 SMBIOS and my OpenGL performance went up over 500%.
- Geekbench (32-bit): 15742
- Xbench: Stops at thread test
- Novabench: Stops at the end of the integer test
- Cinebench 11.5 (64-bit) OpenGL: 54,51fps / CPU: 9,35pts
- Mobo (BIOS): ASUS P8Z68-V Pro (0501)
- CPU: Intel i7 2600k @ 4,8ghz
- RAM: 8GB OCZ Platinum OCZ3P1600C6LV4GK 1333MHz 7-7-7-17-1T
- GFX: 2 x Reference NVIDIA GeForce GTX 470 1280MB
- HDD: Crucial RealSSD C300 CTFDDAC064MAG-1G1 2,5” 64GB SATA III
- Display: NEC MultiSync 20WMGX2
System Info & Drivers
- DSDT: No
- OS X: 10.7
- Kernel: 11.0.0
- Architecture: 64-bit
- Bootloader: Chameleon 2.0 RC5 r1083
- Branch: Trunk
- GFX: Vanilla NVDAGF100Hal
- BCLK Frequency: 100,0
- Turbo Ratio: By Per Core
- *-Core Ratio Limit: 48
- Internal PLL Overvoltage: Auto
- Memory Frequency: DDR3-1333MHz
- EPU Power Saving Mode: Disable
- Load-line Calibration: Ultra High
- VRM Fixed Frequency Mode: 350
- Phase Control: Extreme
- Duty Control: Extreme
- CPU Current Capability: 100%
- CPU Manual Voltage: 1,425
- DRAM Voltage: 1,65
- CPU Spread Spectrum: Disabled
Posted 11 July 2011 - 08:30 AM
where can i download GALAXIES 32K_V2? can't seem to find it anywhere.
you can download it here:
Thanks to Mitch_de for his effort!
- Xbench: Stops at thread test
I forgot to mention it! The same happened to me! As you can see on my Test picture I have unchecked the thread test!
All other test went OK on my system.
Posted 11 July 2011 - 11:06 PM
Posted 12 July 2011 - 07:20 AM
Posted 12 July 2011 - 11:14 AM
none of the Galaxy links in that thread work, they've all been dead for ages. Any chance anyone can upload it somewhere or post it in this thread? TIA.
as soon as I come home, will upload it!
Mr. v7kF4U2HTd suggested:
"what would be interesting would be results of 10.6 and 10.7 from the same machine."
that was the meaning of this topic, as you can see on the end of my first post:
"The Snow Leopard Test results from the same system can be seen here:
Snow Test Results"
Posted 12 July 2011 - 01:27 PM
Posted 12 July 2011 - 09:36 PM
OpenGL Extensions Viewer:
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users