vickywaqas Posted June 19, 2011 Share Posted June 19, 2011 Hello! I just registered to post here of my problem! I have installed Ideneb 10.5.6! I can dual boot with XP, Ubuntu and Mac! this all happened after a whole day of solutions searching on internet! well after i chose mac to boot with -x and -v a lot of lines occured on black screen in verbose mode! I have uploaded video on youtube of it ! go here : if u want to see a pic tell me! After all this long loading a sky bluish screen occurs for a second and then that fades or Crash (i dont know) to a black screen! I HAVE TRIED REMOVING MY GRAPHICS CARD but problem was not solved! i tried installing in these ways ; with 1. voodo kernel , 2. kernel sleep, 3. amd patch!, 4. selecting all important drivers, 5. only selecting kernel!!! I tried booting with 1. -v 2. -x 3. -x -v 4. -x -v -f 5. -f ANY OF THEM DID NOT WORK! IN THE VIDEO ALL THE IMPORTANT DRIVERS ARE SELECTED and kernel sleep with amd patch is selected [i have written which below] Stlll thr is same problem which was with voodoo kernel. i have written which drivers i have selected before each spec below! I FEEL THR IS SUM PROBLEM WITH CHIPSET! PLS TELL ME WHICH DRIVERS SHLD I CHOOSE FOR THE BELOW SPECS! CPU-Z TXT Report ------------------------------------------------------------------------- Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 2 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 -- Core 1 -- Thread 0 1 Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 2 (max 2) Number of threads 2 (max 2) Name AMD Athlon 64 X2 5000+ Codename Brisbane Specification AMD Athlon 64 X2 Dual Core Processor 5000+ Package Socket AM2 (940) CPUID F.B.1 Extended CPUID F.6B Brand ID 4 Core Stepping BH-G1 Technology 65 nm Core Speed 2612.1 MHz Multiplier x FSB 13.0 x 200.9 MHz HT Link speed 1004.6 MHz Stock frequency 2600 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 13.0x Max VID 1.375 V P-State FID 0x2 - VID 0x12 (5.00x - 1.100 V) P-State FID 0xA - VID 0x11 (9.00x - 1.125 V) P-State FID 0xC - VID 0x0F (10.00x - 1.175 V) P-State FID 0xE - VID 0x0D (11.00x - 1.225 V) P-State FID 0x10 - VID 0x0B (12.00x - 1.275 V) P-State FID 0x12 - VID 0x09 (13.00x - 1.325 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset {AppleNforceATA} ------------------------------------------------------------------------- Northbridge NVIDIA MCP61 rev. A3 Southbridge NVIDIA MCP61 rev. A2 Graphic Interface PCI-Express PCI-E Link Width x16 PCI-E Max Link Width x16 Memory Type DDR2 Memory Size 2048 MBytes Channels Dual Memory Frequency 261.2 MHz (CPU/10) CAS# latency (CL) 4.0 RAS# to CAS# delay (tRCD) 4 RAS# Precharge (tRP) 4 Cycle Time (tRAS) 11 Bank Cycle Time (tRC) 15 Command Rate (CR) 2T Monitoring ------------------------------------------------------------------------- Mainboard Model Nettle2 (0x0000029E - 0x007EA4D2) DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version 5.11 date 06/05/2007 DMI System Information manufacturer HP-Pavilion product GC671AA-ABA a6130n version unknown serial CNX72424X8 UUID {74BFED80-8651-1012-BAA6-F70DD62A10BD} DMI Baseboard vendor ECS model Nettle2 revision 1.0 serial unknown DMI System Enclosure manufacturer Hewlett-Packard chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Athlon 64 X2 Dual Core Processor 5000+ clock speed 2613.0 MHz FSB speed 201.0 MHz multiplier 13.0x Graphics ------------------------------------------------------------------------- Number of adapters 1 Graphic APIs ------------------------------------------------------------------------- API ATI I/O API ADL SDK Display Adapters ------------------------------------------------------------------------- Display adapter 0 Name ATI Radeon HD 2400 Series note by me: Its PCI [sELECTED THE GRAPHIC DRIVER, in second phase not selected ; still error!] Codename RV610 Technology 65 nm Memory size 256 MB Memory bus width 64 bits GPU ref clock 27000 PCI device bus 2 (0x2), device 0 (0x0), function 0 (0x0) Vendor ID 0x1002 (0x1462) Model ID 0x94C3 (0x1100) Performance Level 0 Software ------------------------------------------------------------------------- Windows Version Microsoft Windows XP Professional Service Pack 3 (Build 2600) DirectX Version 9.0c BTW I SPENT A LOT OF TIME REGARDING BOOT AND INSTALLATION ERRORS SO IF SUM1 reading this have these errors pls ask! i will gladly respond!! AND BTW THANX EVRY1 WHO HAS READ THIS TOPIC! Link to comment Share on other sites More sharing options...
josephien Posted June 19, 2011 Share Posted June 19, 2011 next time when filming, please use a tripod (i've got a headache now) did you try using the other video port on your graphics card? also, are you using the vga or dvi connection? Link to comment Share on other sites More sharing options...
vickywaqas Posted June 19, 2011 Author Share Posted June 19, 2011 next time when filming, please use a tripod (i've got a headache now) did you try using the other video port on your graphics card? also, are you using the vga or dvi connection? THAN U for the reply! NEXT TIME I WILL, I DIdnt try the othr port on my card becoz i dont have a dvi cable!! AND i am using VGA Connection! Link to comment Share on other sites More sharing options...
Recommended Posts