wem3 Posted June 17, 2011 Share Posted June 17, 2011 send me your DSDTrun on terminal My apologies for being obtuse. I rebooted w/o DSDT and used the autopatcher to extract a clean dsdt.aml, but am still not permitted to attach it (when you say send it to you, do you mean via PM?) I used your 'runme.app' before and after rebooting w/o a DSDT (after modifying my Extra folder), and attached both send_me.zips. If this is wrong, please let me know. I can't tell you how much I appreciate your help. I reconfigured my system a few weeks ago to put it on an SSD, and used tonymacx86's method (as opposed to the DD style install I did initially), but have come to find that this method leaves me with less access to what's really going on. Is it possible to clean up this install, or should I just nuke it altogether and start afresh with your updated method? Thanks again. Ah, crud. Sorry, I didn't see you last post before replying. I reconfigured with these clunky kexts so that I could get a clean DSDT (I thought it was necessary to do so). Would it be better if I restored my last configuration and then used the code you suggested? send_me_ORIG.zip send_me.zip Link to comment Share on other sites More sharing options...
MaLd0n Posted June 17, 2011 Author Share Posted June 17, 2011 ... this DSDT that you're using is very incomplete use it dsdt.wem3.zip add in boot.plist <key>GeneratePStates</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> Link to comment Share on other sites More sharing options...
wem3 Posted June 17, 2011 Share Posted June 17, 2011 Thanks most kindly. However, I'm afraid I've subsequently broken my audio. My boot is also considerably slower. The dsdt.aml file that you gave me is already patched, correct? If not, do I apply relevant patches, or leave it alone altogether? Sorry to be a hassle... Link to comment Share on other sites More sharing options...
MaLd0n Posted June 17, 2011 Author Share Posted June 17, 2011 Thanks most kindly. However, I'm afraid I've subsequently broken my audio. My boot is also considerably slower. The dsdt.aml file that you gave me is already patched, correct? If not, do I apply relevant patches, or leave it alone altogether? Sorry to be a hassle... the DSDT already have all you need send me a log cat /var/log/kernel.log and ioreg -lw0 | grep CSTInfo and kextstat run on terminal save .txt Link to comment Share on other sites More sharing options...
wem3 Posted June 17, 2011 Share Posted June 17, 2011 sent. Link to comment Share on other sites More sharing options...
MikOnMac Posted June 17, 2011 Share Posted June 17, 2011 Gigabyte? HaHaHadsdt.MikOnMac.zip Your DSDT didn't solved AppleACPIPlatform kernel panic. Do you think some other patch is needed? Link to comment Share on other sites More sharing options...
MaLd0n Posted June 17, 2011 Author Share Posted June 17, 2011 Your DSDT didn't solved AppleACPIPlatform kernel panic.Do you think some other patch is needed? nope this problem has occurred frequently I do not know what can be Link to comment Share on other sites More sharing options...
wem3 Posted June 17, 2011 Share Posted June 17, 2011 the DSDT already have all you needsend me a log Apologies, when you say send, do you mean that this sort of info should be posted here rather than PM'd to you? If I were to reinstall in order to clean my system of any [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] residuals (as I'm not really certain what kexts, if any, it installs to S/L/E rather than just E/E), would I need to extract a new, pristine DSDT and then patch it, or could I continue to use the one you provided? I would need to further modify it if changing the BCLK, right? Thanks. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 17, 2011 Author Share Posted June 17, 2011 Apologies, when you say send, do you mean that this sort of info should be posted here rather than PM'd to you? If I were to reinstall in order to clean my system of any [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] residuals (as I'm not really certain what kexts, if any, it installs to S/L/E rather than just E/E), would I need to extract a new, pristine DSDT and then patch it, or could I continue to use the one you provided? I would need to further modify it if changing the BCLK, right? Thanks. yep post here, no problem use a fresh install, use Extra MacPro4,1 use Auto-patcher and HDEF Gigabyte Link to comment Share on other sites More sharing options...
Renard45 Posted June 24, 2011 Share Posted June 24, 2011 doesn't work for me on my G41MT-D3 still have errors i can not have instal screen please help Link to comment Share on other sites More sharing options...
MaLd0n Posted June 24, 2011 Author Share Posted June 24, 2011 doesn't work for me on my G41MT-D3 still have errors i can not have instal screen please help post a photo Link to comment Share on other sites More sharing options...
Renard45 Posted June 24, 2011 Share Posted June 24, 2011 ok i have this: Uploaded with ImageShack.us sorry for the crappy quality... Link to comment Share on other sites More sharing options...
MaLd0n Posted June 24, 2011 Author Share Posted June 24, 2011 ok i have this: try with HackBoot V5 Link to comment Share on other sites More sharing options...
Renard45 Posted June 25, 2011 Share Posted June 25, 2011 ok i will try thanks you Link to comment Share on other sites More sharing options...
Renard45 Posted June 26, 2011 Share Posted June 26, 2011 no good i got a black screen i'm so sad i take many days to try install snow on it Link to comment Share on other sites More sharing options...
MaLd0n Posted June 26, 2011 Author Share Posted June 26, 2011 no good i got a black screen i'm so sad i take many days to try install snow on it try with arch=i386 -x the problem is GPU Link to comment Share on other sites More sharing options...
Renard45 Posted June 26, 2011 Share Posted June 26, 2011 you sure? i have tried with a 9500 GT same problem... i have tried arch=i386 -x same problem at the end have a black screen.. do you think my ram is the problem or not? what about my bios parameters ? Link to comment Share on other sites More sharing options...
Kurculja Posted June 26, 2011 Share Posted June 26, 2011 ok i have this: Uploaded with ImageShack.us sorry for the crappy quality... Are you runing oced CPU? If you are, i had a few problems with my PC. Just set a def MUTLY and FSB for your clock (exp: 3200 > 320 * 10 instand od 400*8). ____ Ok, i need AppleHDA i ALC889A for my bord, MaLd0n past something Link to comment Share on other sites More sharing options...
Renard45 Posted June 26, 2011 Share Posted June 26, 2011 what i don't understand? you think i must specify the fsb for my cpu? Link to comment Share on other sites More sharing options...
Kurculja Posted June 26, 2011 Share Posted June 26, 2011 what i don't understand? you think i must specify the fsb for my cpu? I mean if you set overclock that not use a default multy of your cpu. My setup was 3200 (def 10) but, i used 400 fsb with multy 8 to achive 3200 mhz. After update only 3200 is possible with def multy 10. Any other > KP. Link to comment Share on other sites More sharing options...
Renard45 Posted June 26, 2011 Share Posted June 26, 2011 i don't set overlock... ifound my problem i have tried with a cpu of a friend a dual core E2180 fsb 800 i have the install screen go back with my E6750 fsb 1066 black screen i don't understand help please Link to comment Share on other sites More sharing options...
wangdaye Posted June 27, 2011 Share Posted June 27, 2011 Here is original DSDT.bin. No patchs seleted when running DSDT Auto Patcher. MB:GA-H67MA-USB3-B3 CPU:i3 2100 GPU:GTS450 RAM:2X2G dsdt.aml.rar Link to comment Share on other sites More sharing options...
MaLd0n Posted June 27, 2011 Author Share Posted June 27, 2011 MB:GA-H67MA-USB3-B3 dsdt_wangdaye.zip Link to comment Share on other sites More sharing options...
soundiego Posted July 6, 2011 Share Posted July 6, 2011 HackBoot discs don't boot. I've tried with V5, V6 and V6.2. All of them begin to load from HD and then reboot. Maybe these screen shots will help. I start by loading from any HackBoot CD, in this case, v6.2 This is my Video Card: Sentey nVidia G210 1GB DDR3 Then, my Mobo: Gigabyte H61M-D2P-B3 Rev 1 Bios F5 with an Intel i3 2100 1155 Bios is set in AHCI mode: Then I choose Verbose at this last line, it goes blank and the system reboots. I cannot pass this point. In the HD SL installation I copied Extra 12.1 folder I downloadad from this thread and installed Chameleon RC5 just as you described. The system won't load without CD loader (only [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]). Any idea what can be causing this? [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] method didn't work either. Thank you very much in advance, Diego Link to comment Share on other sites More sharing options...
MaLd0n Posted July 6, 2011 Author Share Posted July 6, 2011 I have no idea Link to comment Share on other sites More sharing options...
Recommended Posts