garcia456891 Posted May 20, 2011 Share Posted May 20, 2011 I was trying to install OSX with a modified version of Boot123. The drivers I used seem to not work for my card. This are my rig specs: i7-970 @3.2Ghz OC to 4Ghz 12gb A-Data ram: 6x2gb 3xChannel 1333mhz 9-9-9-24 OC to 1600mhz 7-7-7-20 Asus Mobo: P6X58D-P XFX 5830 Stock Clock/Volt This is what I have in my Extra folder: [GPU Related] ATI500Controller.knext ATIFramebuffer.knext ATIRadeonx3000.knext ATIRadeonx3000GA.plugin ATIRadeonx3000GLDriver.bundle ATIRadeonx3000VADriver.bundle ATISupport.knext ATY_Init.knext [MOBO/CPU Related] AppleYukon2Injector.knext fakesmc.knext HDAEnabler.knext HDAEnabler.knext IOAHCIBlockStorageInjector.knext LegacyHDA.knext NullCPUPowerManagement.knext With the parameter: -v -x arch=i386 cpus=6 busratio=25 GraphicsEnabler=yes "Graphical Mode"="1920x1080x32x60" The computer loads all the drivers and modules until it tries to go into graphical mode; then the GPU fan revs up to 100% and the computer starts to beep. I have to power off the computer by holding the power button for 6 sec. With this parameter: -v -x arch=i386 cpus=6 busratio=25 GraphicsEnabler=no "Graphical Mode"="1920x1080x32x60" The computer stalls with a black screen, however the GPU fan does not rev up to 100%. The computer shuts off immediately when I push the power button. When "GraphicsEnabler" is set yo "NO" it seems as if the OS is running without graphical output. So this leads me to believe that the culprit is my GPU or that the drivers are not loading. THNX in advance! Link to comment Share on other sites More sharing options...
Recommended Posts