Jump to content

Run Mac OS in VMWare Workstation without Hardware Virtualization


80 posts in this topic

Recommended Posts

edit: all you german guys should also have a look at this thread on boerse.bz.

 

Hey guys,

 

as I couldn't run Mac OS in VMWare Workstation because my hardware is not capable of Hardware Virtualization, I figured out a way to bypass the check.

 

This patch was created using Tola's Patching Engine 2.03b and packed using UPX 3.07, which will possibly cause virus scanners to detect it as malware. However, this patch is absolutely clean and only changes 2 bytes in vmware-vmx.exe.

 

Patch for 7.1.3/7.1.4/8.0.0/8.0.1 32/64 bit:

http://cur.lv/g1ry

 

Patch for 7.1.3/7.1.4/8.0.0/8.0.1/8.0.2/8.0.3 32/64 bit:

http://cur.lv/g1rv

 

Regards,

CubeZ

Link to comment
Share on other sites

  • 2 months later...

If this didn't work I wouldn't have posted it ;)

 

You're the first one of about 700 downloaders who says it didn't work so I guess you're either trying with the wrong version of VMWare (watch out for 32/64bit) or your vmware-vmx is already patched otherwise. Another patch changing this very section of code is highly unlikely, though.

 

CubeZ

Link to comment
Share on other sites

If this didn't work I wouldn't have posted it ;)

 

You're the first one of about 700 downloaders who says it didn't work so I guess you're either trying with the wrong version of VMWare (watch out for 32/64bit) or your vmware-vmx is already patched otherwise. Another patch changing this very section of code is highly unlikely, though.

 

CubeZ

 

thanks for the reply...

 

could you please send me one patched version of the file? 7.14 or 7.13 (tried with both versions)

 

7.14(385536)

7.13(324285)

 

Thanks...

 

Cya

 

 

 

ps: by the way... when i install vmware workstation... i need to rename the exe from vmware.exe to vmware-vmx.exe... right?

Link to comment
Share on other sites

ps: by the way... when i install vmware workstation... i need to rename the exe from vmware.exe to vmware-vmx.exe... right?

 

that's why it doesn't work for you!

vmware-vmx.exe already exists. it's either right in the vmware installation folder or in case of x64 installation in the \x64 subfolder!

 

edit: should work on win7 x64 as well! look for vmware-vmx.exe in ...\Program Files\VMWare Workstation\x64\

Link to comment
Share on other sites

  • 1 month later...
edit: I'm not quite sure if this is the right section, if not, would someone please move this post to the appropriate forum?

 

Hey guys,

 

as I couldn't run Mac OS in VMWare Workstation because my hardware is not capable of Hardware Virtualization, I figured out a way to bypass the check.

 

The patches have been created using Tola's Patching Engine 2.03b, which might cause virus scanners to categorize them as malware. However, these patches are absolutely clean and do only change 2 bytes in vmware-vmx.exe.

 

7.1.3 32/64 Bit https://rapidshare.com/files/461713208/vmwa...-patch-7.1.3.7z

(tested on 7.1.3 build-324285)

 

7.1.4 32/64 Bit https://rapidshare.com/files/461713209/vmwa...-patch-7.1.4.7z

(tested on 7.1.4 build-385536)

 

It is possible, that these patches work on other versions, too. (Actually the 32 Bit patches for 7.1.3 and 7.1.4 are the very same patch). If you tried and it worked, please consider posting the version/build it worked with. If you have a version later than 7.1.4 and none of these patches work, feel free to upload your vmware-vmx.exe, that I can have a look at it. Also feel free to comment this in any way :rolleyes: .

 

Regards,

CubeZ

Hi

 

I am using this version 7.1.4 build-385536 of Vmware on Windows 7 x64

I am trying to use OSX prebuilt vmdk file on Vmware.

 

After applying the Mac OSX guest patch (after or before tried both)

As soon as I open the vmware image i get this error:

You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host does not support VT.

For more detailed information, see http://vmware.com/info?id=152.

 

Continue without 64-bit support?

 

If I press Yes it hangs there,if no the image booting stops.

I have heard this patch works for many people,but it just doesn't seem to work right for me.

Please guide where am I doing it wrong.

After applying patch it says 1 of 1 patched.

Link to comment
Share on other sites

Hi sam,

 

I have never heard of this problem before. Unfortunately I can't try to reproduce this error, because I don't own a 64bit version of Windows 7. But as I've gotten hardly any negative feedback after about 3200 downloads, i suppose everything works fine.

 

Can't read the article you posted as the vmware knowledge base seems to be down due to some kind of maintenance.

 

Have you tried to 'tell' VMWare that you wanna install a 32 bit guest when you're creating the new VM? When I create one I can choose from "Mac OS X Server 10.6" and "Mac OS X Server 10.6 64-bit". Try using the non-64 option.

 

Not a solution but might be kind of a workaround for this issue. I'm studying for exams at the moment so I won't be able to take care of this within the next 3 weeks. That's also why my answer comes this late. Sorry for that!

 

If you find a solution for this, please keep me updated!

Link to comment
Share on other sites

I have tried Mac OS X Server 10.6 option but then it does not execute this OSX Lion image as it is 64-bit.

I saw this problem occuring to many on this video thread:

http://www.youtube.com/watch?v=QzIcekKhThQ...MIQ&lf=plcp

Maybe it is 64-bit specific.

Maybe some more bytes needs to be changed in 64-bit .exes to counter this check in them.

 

I promise I'll have a look at your problem as soon as I have more free time. Might take a couple of weeks, though.

 

Also might be a Lion specific problem. Try installing 10.6.x for now if you're not dependant on 10.7.

 

regards,

CubeZ

Link to comment
Share on other sites

  • 3 weeks later...

Hi Fellows!

I'm trying to patch my vmware 7.1.4 x64 but pathcer stops working. Here are the details of the error;

 

Problem signature:

Problem Event Name: APPCRASH

Application Name: vmware-vmx-patch-7.1.4_64bit.exe

Application Version: 2.0.0.0

Application Timestamp: ae332c46

Fault Module Name: StackHash_2af3

Fault Module Version: 6.1.7600.16695

Fault Module Timestamp: 4cc7ab86

Exception Code: c0000374

Exception Offset: 000cea27

OS Version: 6.1.7600.2.0.0.256.1

Locale ID: 1055

Additional Information 1: 2af3

Additional Information 2: 2af31051f49b1edf1ebe62576e5103e3

Additional Information 3: 2adb

Additional Information 4: 2adbba67677e8df4e60517f7795ba7f8

 

Read our privacy statement online:

http://go.microsoft.com/fwlink/?linkid=104...mp;clcid=0x0409

 

If the online privacy statement is not available, please read our privacy statement offline:

C:\Windows\system32\en-US\erofflps.txt

 

I also attached my exe file to my post. What am i doing wrong ?

 

Thanks.

 

Ersin

vmware_vmx.rar

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 3 weeks later...

There now is only a single patch for all versions (7.1.3+). Backup function was disabled due to a pile of people reporting crashes. Also, it shouldn't matter now if you already applied other patches such as the Mac OS Guest Unlocker.

Link to comment
Share on other sites

  • 2 weeks later...

This patch didn't work on my end. It said that it successfully patched it, but when I try to run the Mac OS X image, it says that it needs virtualization technology enabled because it is a 64 bit guest.

 

I'm using VMware 7.1.4 build 385536, and the files from this tutorial http://technologic10...e-in-windows-7/

 

sZ9OH.jpg

 

If I click yes, it just hangs in a black screen, if no, it stops the VM.

Link to comment
Share on other sites

Running Mac OS in 64bit mode without working VT seems not to be possible as easily. Try creating a new 32bit mode VM and Mac OS should be running just fine.

 

edit: Try changing the value of "guestOS" from "darwin64" to "darwin" or "darwin10-64" to "darwin10"

Link to comment
Share on other sites

  • 1 month later...

edit: all you german guys should also have a look at this thread on boerse.bz.

 

Hey guys,

 

as I couldn't run Mac OS in VMWare Workstation because my hardware is not capable of Hardware Virtualization, I figured out a way to bypass the check.

 

This patch was created using Tola's Patching Engine 2.03b and packed using UPX 3.07, which will possibly cause virus scanners to detect it as malware. However, this patch is absolutely clean and only changes 2 bytes in vmware-vmx.exe.

 

Patch for 7.1.3/7.1.4/8.0.0/8.0.1 32/64 bit:

https://rapidshare.c...re-vmx-patch.7z

 

Regards,

CubeZ

 

Not sure why, but this patch does not work for me.

I'm running Win7 64bit, but I have VMware Workstation v8.0.1.528992 32bit.

 

I placed the patch file in Program Files (86x)/VMware.. folder, ran the patch. Got a message saying 0 of 7 patterns, Patch will not work.

I ran it again, got a message saying 1 of 7 patterns.. Patch may work.

 

Tried to Power on the VM of OSX Lion and I contuniue to get "Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization."

 

Was really hoping this would work, as I have yet to find any other options/possible solutions.

Link to comment
Share on other sites

I'm running Win7 64bit, but I have VMware Workstation v8.0.1.528992 32bit.

 

I don't think that's possible as long as you run the standard vmware setup.

is there a \x64 subfolder? did you patch the vmware-vmx.exe file in the \x64 subfolder?

Link to comment
Share on other sites

Hello, I've got the same problem as Kurt Hectic with VMware 7.1.3 (324285). You don't have any solution ? I'd love to install Mac Osx Lion on my PC, I was happy because I tought I could bypass the hardware virtualization successfully, but no...

Please help me.

 

In any case, thanks a lot for your soft !

Link to comment
Share on other sites

If you have the very same problem as Kurt, this still applies:

 

Well if the VM starts, the patch works. If you get stuck during the boot process, that's a configuration issue.

 

I'm not too much into Mac OS itself, so I'm afraid I can't help you with this. Boot Lion in verbose mode to check what the problem is and you'll most likely be able to solve it.

Link to comment
Share on other sites

 Share

×
×
  • Create New...