daavvis Posted April 8, 2011 Share Posted April 8, 2011 Hey im trying to build or modify a kext to work for this card... i dont really know where to start, other than maybe to add the device id to the io80211.kext with the devise id (some athros cards are supported), but i cant find the id that starts with "pci"... this is the information i have on the wireless usb adapter, i took it apart and copied the numbers from the chip, and also plugged it in to my m1330 (snow leopard) and copied the information from there as well: heres what i have anyone care to help? from chip: atheros ar9271-al1a DOS328C 1034 R.YS10AR3845 970YS10720SMT VER 1.2 and from system profiler: Product ID: 0x9030 Vendor ID: 0x0846 Version: 1.08 Serial Number: 12345 Speed: Up to 480 Mb/sec Manufacturer: NETGEAR WNA Location ID: 0xfd100000 Current Available (mA): 500 really hope someone can help me out here... i know quite a few people have this usb adapter (its a inexpensive 150n adapter) and id like to help us all out... i could buy a new card but i like this one.... Link to comment Share on other sites More sharing options...
Recommended Posts