Jump to content

HP 2510p Hazard 10.6.6i Kernel Panic


waqy
 Share

19 posts in this topic

Recommended Posts

Hey guys first time poster here :P I posted this same urgent help message on another forum but received no help unfortunately. Maybe you guys can be different :)

 

I've got a HP 2510p laptop on which I have managed to get iDeneb 10.5.7 working, with ethernet, bluetooth and sound all working fine. I decided to try and install Hazard 10.6.6i as I need Snow Leopard to run for some softwares. I cant seem to get the installer to run due to a kernel panic(picture below). Can anyone dissect the problem and give me a solution? :(

 

Memory: 2048MB

Processor: Intel Core 2 Duo 1.4Ghz

14vr9l3.jpg

http://i51.tinypic.com/14vr9l3.jpg"]http://i51.tinypic.com/14vr9l3.jpg[/url]

 

Thanks :)

Link to comment
Share on other sites

no, boot up the mac, go to System/Library/Extensions or Extra/Extensions and delete ElliottForceLegacyRTC.kext.

 

if you can't boot it up, then use terminal. Pop in the distro dvd and use the terminal from there.

 

Ok cheers for your help mate. Could you recommend or anyone else recommend a good place to read up on Mac Terminal commands? Im only experienced in MS DOS :)

 

Edit: Managed to find a beginners guide on google. Trouble is the above directories you told me to check didnt exist.

Link to comment
Share on other sites

OK I used transmac to take out the Elliot kext from the iso file, burnt it and now i've gone as far as to the main installation screen :)

 

Cheers for putting up with all the hassle Dot :censored2:

 

Will keep the thread updated as I go along

Link to comment
Share on other sites

Thats where I got the above screenshot from, by running -v at the loader. seems to be ElliotForceLegacyRTC again though I removed this from the DVD when installing...

 

It also says dependancy: com.apple.iokit.IOACPIFamily(1.3.0)..

 

Edit: I've used the distro DVD to boot into the terminal, and Im in the Extensions folder and Elliot is nowhere to be seen..should i remove IOACPIFamily.kext?

Link to comment
Share on other sites

  • 1 month later...

Hello,

 

I own a HP 2510p too, but after following all the steps you mentioned, I still can't install.

 

I've removed the ElliottForceLegacyRTC.kext, I even patched the dvd with SL_10.6.6i_IOATAFamily.ppf.

 

Still having kernel panic, after loading firewire.

 

Can you confirm which BIOS settings you have? also your ISO source or version please?

 

King regards

Link to comment
Share on other sites

  • 3 weeks later...

I haven't tried all of this yet, but I can confirm that the 2510p will boot OS X with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with full resolution, but I haven't install OS X yet, so I can't confirm sound or sleep, etc.

Link to comment
Share on other sites

  • 2 weeks later...

Hi,

 

Am having some problems with my install, I had the very same issues of Elliot and I deleted that from the ISO and burned a new image from which I was able to install successfully :) ! I removed the same file from the systems after install as well,So far so good !

 

But not really when I try to boot it just won't and gets stuck at the apple logo screen in normal mode,just doesn't move at all,in verbose mode it gets stuck at the Realtek ethernet driver stage ? or so,but no kernel panic or anything it just doesn't move beyond this !

 

My System is HP Pavilion DV3005TX,Spec goes :

 

C2D T5550 (1.83)

2Gb DDR2

250Gb WD Scorpio Black

 

 

Any other details required ? I've attached the pic for the reference in verbose mode boot.

 

Please somebody advice whats the issue,Should I remove or update the Ethernet Kext ?

 

Regards.

post-634863-1303297576_thumb.jpg

Link to comment
Share on other sites

Hi,

 

Update ! Posting here so that others who may have same issue !

 

Well I sort of solved this myself, After couple of reboots I replaced the IOC network family kext with some new one that I found on a site,even then the result was same ! So I tried to boot in safe mode and viola it booted in without a problem !

 

Then I downloaded the following realtek driver package from this site and installed and now it boots normally and Am able to use the net !

 

Realtek Package

 

However its far from being over or perfect :P !! I still don't have Audio working on it and the damn Intel wireless is still not working,So the Nvidia GPU ! I have additionally installed a package for the same from this site but still the display is in native mode with no options or such. The mouse pad doesn't work fully and such,so still some issues to iron out but overall working fine and dandy :D !!

 

Nvidia Update

 

Now any of you kind folks tell how the heck Am I suppose get these things working :wacko: ???

 

 

Regards.

Link to comment
Share on other sites

  • 1 month later...

the 2510p doesnt have an nvidia gpu. Its an x3100 I think

 

Hi,

 

Update ! Posting here so that others who may have same issue !

 

Well I sort of solved this myself, After couple of reboots I replaced the IOC network family kext with some new one that I found on a site,even then the result was same ! So I tried to boot in safe mode and viola it booted in without a problem !

 

Then I downloaded the following realtek driver package from this site and installed and now it boots normally and Am able to use the net !

 

Realtek Package

 

However its far from being over or perfect :P !! I still don't have Audio working on it and the damn Intel wireless is still not working,So the Nvidia GPU ! I have additionally installed a package for the same from this site but still the display is in native mode with no options or such. The mouse pad doesn't work fully and such,so still some issues to iron out but overall working fine and dandy :) !!

 

Nvidia Update

 

Now any of you kind folks tell how the heck Am I suppose get these things working :( ???

 

 

Regards.

Link to comment
Share on other sites

  • 3 weeks later...

hey i want help for hazard 10.6.6i dvd. i installed it on my computer after many tries and at the end i was able to do it by selecting the options in the installation process like

chameleon rc5

nvidia enabler

ahci sata fix

legacy ahci sata and pata fix

voodoo 2.7 sound driver

ntfs and usb fix

 

before selecting these options i was not able to boot the system after installation because after installation the system just gives me the a blank screen and say no boot media found. but now it gives me an option to boot from mac but when i select it, the system gives the error after few seconds of loading that root device not found or i think it says that root directory not found.

i am attaching some images of my system specification and just want to tell you that i am using a seagate 40gb IDE hard disk only for this mac installation. no multiple operating systems on this pc just mac os.

 

37376378.th.jpg

17423573.th.jpg

42663920.th.jpg

20538378.th.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...