Jake TR Posted December 28, 2010 Share Posted December 28, 2010 Steps to Get Your HD5670 Working 100% ATI Radeon HD5670 (Mostly taken from DaviDemon’s post with few changes. Credit goes to him) Step 1. Do a clean install of Snow Leopard and apply the 10.6.4 update(Required). Step 2. Download and Install Kext Helper b7. Step 3. Open and Install Only these files from within the attachment below. Provided by Netkas. Leave the other files for later. 1. ATY_Init.kext 2. ATI5000Controller.kext 3. ATIFramebuffer.kext 4. ATISupport.kext Step 4. Turn your hidden files on and Go to /Extra folder (located in OSX installed drive) and edit com.apple.Boot.plist. Your boot file should have these keys and strings. Very important. 1. <key>Kernel</key> 2. <string>mach_kernel</string> 3. <key>Kernel Flags</key> 4. <string>arch=i386</string> 5. <key>GraphicsEnabler</key> 6. <string>No</string> Step 5. Reboot your computer with –v flag to see if any errors occur. Step 6. Install Graphics Update 1.0 ( Do not restart yet) Step 7. Run Kext Helper b7 and install rest of the files within the attachment. This will enable hardware acceleration (QE/CE). 1. ATIRadeonX3000.kext 2. ATIRadeonX3000GA.plugin 3. ATIRadeonX3000GLDriver.bundle 4. ATIRadeonX3000VADriver.bundle Step 8. Reboot & you are done! P.S. I am only using the DVI output. I have not tested neither VGA nor HDMI. HD5670_Files.zip Quote Link to comment Share on other sites More sharing options...
starship-Insanity Posted January 6, 2011 Share Posted January 6, 2011 Is it feasible to get a working 5670 on Leopard 10.5.8? I have seen an iMac with a 5670 and specs say OS: 10.5.8 or later... although the machine is pre-installed with SL. Spent so long getting my 10.5 hack to be every-day-fully-functional - i'm so afraid of mucking it up with SL plus the HD 3850 gfx card in use can't function in SL either. What gfx cards work in both... just ponderin'... btw. nice clear explanation. will be back to this post when i decide to give it a go. cheers! Quote Link to comment Share on other sites More sharing options...
jeffdodge Posted January 8, 2011 Share Posted January 8, 2011 when I reboot at step five my computer hangs on VoodooHDAengine. Before the first part of the drivers got installed it worked fine. This damn 5670 is killing me! Gigabyte ATI HD5670 1GB Quote Link to comment Share on other sites More sharing options...
Leandro BH Posted January 8, 2011 Share Posted January 8, 2011 Did everything just as in here but after the reboot w/ -v, it starts showing up verbose then the screens got black, but it seems to keep loading. Got a Saphire 5670 w/ 512, Displayport, HDMI and DVI and tried w/ HDMI only, DVI only and both HDMI and DVI connected but nothing....... On the DVI monitor, it keeps showing the message "Connect to the video card" as if i've unplugged the monitor. Quote Link to comment Share on other sites More sharing options...
Jake TR Posted January 10, 2011 Author Share Posted January 10, 2011 Is it feasible to get a working 5670 on Leopard 10.5.8? I have seen an iMac with a 5670 and specs say OS: 10.5.8 or later... although the machine is pre-installed with SL. Spent so long getting my 10.5 hack to be every-day-fully-functional - i'm so afraid of mucking it up with SL plus the HD 3850 gfx card in use can't function in SL either. What gfx cards work in both... just ponderin'... btw. nice clear explanation. will be back to this post when i decide to give it a go. cheers! I had a really good luck with 9800GT with almost every version of OSX. There were only few times where I had to make tweaks which were relatively easy to do. Nvidia cards are mostly problem free with OSX at least with my experience. when I reboot at step five my computer hangs on VoodooHDAengine. Before the first part of the drivers got installed it worked fine. This damn 5670 is killing me! Gigabyte ATI HD5670 1GB Sounds like you are having a sound issue there which is not really related to the Graphics problem you are running into. Make sure you are editing your com.boot.plist file with the correct options. If you are still coming up with VoodooHDA problem, before the reboot at step 5 remove that VoodooHDA kext from /System/Library/Extensions folder. Try the reboot with -V again and see how that works. Did everything just as in here but after the reboot w/ -v, it starts showing up verbose then the screens got black, but it seems to keep loading. Got a Saphire 5670 w/ 512, Displayport, HDMI and DVI and tried w/ HDMI only, DVI only and both HDMI and DVI connected but nothing....... On the DVI monitor, it keeps showing the message "Connect to the video card" as if i've unplugged the monitor. well, what does it say in verbose mode? Where does it really hangs? Errors? Most people does not and should not have problem getting their cards working by fallowing these steps. You might be doing something wrong when fallowing the steps or have messed up your system already. I suggest you do a clean install with minimum post-install changes, if you are having too much problems. Quote Link to comment Share on other sites More sharing options...
jeffdodge Posted January 10, 2011 Share Posted January 10, 2011 Sounds like you are having a sound issue there which is not really related to the Graphics problem you are running into. Make sure you are editing your com.boot.plist file with the correct options. If you are still coming up with VoodooHDA problem, before the reboot at step 5 remove that VoodooHDA kext from /System/Library/Extensions folder. Try the reboot with -V again and see how that works. That maybe the case, but why is it that it works fine until I install the kexts for the graphics? Could it be related to the hdmi sound output on the graphics card? It has not given me a single issue until the kexts for the graphics card. UPDATE: Got the framebuffers working, though the resolutions are strange... my screen's native is 1366x768 while the closest I have that looks right is 1280x768... other than that I have all the way up to 2304x1728 so its time to upgrade my monitor IF I get the QE and CI working! UPDATE AGAIN: Got it. After some monkeying around, reinstalling kexts and what not and restarting a few times, removing my voodooHDA, my graphics work. Now to get my sound working again. Quote Link to comment Share on other sites More sharing options...
jeffdodge Posted January 10, 2011 Share Posted January 10, 2011 I spoke too soon, after a restart I get a kernel panic on the ATIRaedonX3000 kext every time. Quote Link to comment Share on other sites More sharing options...
Jake TR Posted January 12, 2011 Author Share Posted January 12, 2011 I am not sure but you might be right on that sound issue. It might be the HDMI sound on the ATI card. I'd prefer you remove all the kext related to ATI from Extensions folder and then start over. But I also suggest you install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] with Chamelon 2 RC5 in advance to get rid of sound(voodooHDA) and framebuffer problems. Quote Link to comment Share on other sites More sharing options...
ontheset Posted January 13, 2011 Share Posted January 13, 2011 something funny. I got this card about 3 days ago and im trying to install iATKOS S3 10.6.3. After the install it boots but my screen is black. Any suggestions? Quote Link to comment Share on other sites More sharing options...
tsoukai Posted January 13, 2011 Share Posted January 13, 2011 What if AMD user and required legacy_kernel? Quote Link to comment Share on other sites More sharing options...
Jake TR Posted January 15, 2011 Author Share Posted January 15, 2011 something funny. I got this card about 3 days ago and im trying to install iATKOS S3 10.6.3. After the install it boots but my screen is black. Any suggestions? can you boot with -v flag to see where it hangs? Most probably it's your Graphics Card tho. Quote Link to comment Share on other sites More sharing options...
Jake TR Posted January 15, 2011 Author Share Posted January 15, 2011 What if AMD user and required legacy_kernel? Sorry I can't really help there. I have always used INTEL for my choice of CPU and clueless about AMD and it's setup for OSX. Quote Link to comment Share on other sites More sharing options...
ontheset Posted January 16, 2011 Share Posted January 16, 2011 I was installing it with graphics enable, when i shoudnt. Im having a problem with step 4. I cant find com.apple.Boot.plist in the extra folder. can you boot with -v flag to see where it hangs? Most probably it's your Graphics Card tho. Quote Link to comment Share on other sites More sharing options...
ontheset Posted January 16, 2011 Share Posted January 16, 2011 can you boot with -v flag to see where it hangs? Most probably it's your Graphics Card tho. I got into the GUI. Im following your steps but i cant find com.apple.Boot.plist in the /Extra folder.I do have hidden files on. The only one is in my /Library/preference folder Quote Link to comment Share on other sites More sharing options...
Jake TR Posted January 17, 2011 Author Share Posted January 17, 2011 I got into the GUI. Im following your steps but i cant find com.apple.Boot.plist in the /Extra folder.I do have hidden files on. The only one is in my /Library/preference folder That's if you have the Chameleon installed which cares about /Extra/com.apple.Boot.plist. /Library/Preferences/com.apple.Boot.plist, is OSX's default file for real Macs. So you are fine by editing the one in /Library/Preferences/. Quote Link to comment Share on other sites More sharing options...
ontheset Posted January 18, 2011 Share Posted January 18, 2011 That's if you have the Chameleon installed which cares about /Extra/com.apple.Boot.plist./Library/Preferences/com.apple.Boot.plist, is OSX's default file for real Macs. So you are fine by editing the one in /Library/Preferences/. OK. now after i reboot the 1st time the bootloader works but right before i get into the GUI the screen goes black. I know its loading cause my drive is blinking but no screen. Here is the last thing i see before it blacks out. By the way i dont know if it matters but i have iATKOS S3 10.6.3 upgraded to 10.6.4 Quote Link to comment Share on other sites More sharing options...
gwmarthe Posted January 18, 2011 Share Posted January 18, 2011 Would this work on ati 4850 card? If not, any advice?? Thanks! Steps to Get Your HD5670 Working 100% ATI Radeon HD5670 (Mostly taken from DaviDemon’s post with few changes. Credit goes to him) Step 1. Do a clean install of Snow Leopard and apply the 10.6.4 update(Required). Step 2. Download and Install Kext Helper b7. Step 3. Open and Install Only these files from within the attachment below. Provided by Netkas. Leave the other files for later. 1. ATY_Init.kext 2. ATI5000Controller.kext 3. ATIFramebuffer.kext 4. ATISupport.kext Step 4. Turn your hidden files on and Go to /Extra folder (located in OSX installed drive) and edit com.apple.Boot.plist. Your boot file should have these keys and strings. Very important. 1. <key>Kernel</key> 2. <string>mach_kernel</string> 3. <key>Kernel Flags</key> 4. <string>arch=i386</string> 5. <key>GraphicsEnabler</key> 6. <string>No</string> Step 5. Reboot your computer with –v flag to see if any errors occur. Step 6. Install Graphics Update 1.0 ( Do not restart yet) Step 7. Run Kext Helper b7 and install rest of the files within the attachment. This will enable hardware acceleration (QE/CE). 1. ATIRadeonX3000.kext 2. ATIRadeonX3000GA.plugin 3. ATIRadeonX3000GLDriver.bundle 4. ATIRadeonX3000VADriver.bundle Step 8. Reboot & you are done! P.S. I am only using the DVI output. I have not tested neither VGA nor HDMI. HD5670_Files.zip Quote Link to comment Share on other sites More sharing options...
Jake TR Posted January 18, 2011 Author Share Posted January 18, 2011 Would this work on ati 4850 card? If not, any advice?? Thanks! I tried it (and dozens of other tutorials) with 4830 but had no success. Gave up that card and bought this. I can't help you there, sorry. Perhaps searching the forum will get you the answer but sometimes going over too many posts makes things more complicated. That is the reason why I made this tutorial. Quote Link to comment Share on other sites More sharing options...
Kenny66 Posted January 21, 2011 Share Posted January 21, 2011 OK. now after i reboot the 1st time the bootloader works but right before i get into the GUI the screen goes black. I know its loading cause my drive is blinking but no screen. Here is the last thing i see before it blacks out. By the way i dont know if it matters but i have iATKOS S3 10.6.3 upgraded to 10.6.4 Wrong framebuffer in ATY_init most likely. The ATY_Init provided here uses Eulemur as far as i remember but for my ASUS 5670 1GB only Baboon works fine. That or doucle check if you installed all kexts in the correct order... Quote Link to comment Share on other sites More sharing options...
calebcaudill Posted January 21, 2011 Share Posted January 21, 2011 Any idea if this would work for the 3200? I'm a photographer and would love to test out Aperture but I can't Quote Link to comment Share on other sites More sharing options...
a.w.w Posted January 26, 2011 Share Posted January 26, 2011 Did everything just as in here but after the reboot w/ -v, it starts showing up verbose then the screens got black, but it seems to keep loading. Got a Saphire 5670 w/ 512, Displayport, HDMI and DVI and tried w/ HDMI only, DVI only and both HDMI and DVI connected but nothing....... On the DVI monitor, it keeps showing the message "Connect to the video card" as if i've unplugged the monitor. I have the exact same problem. has anyone seen a resolve for this? my card is a saphire 5670 w/ vga, HDMI and DVI. I have been using the DVI port. i did the instructions above except installed 10.6.5. I can not even boot with -x I had this card working great, but can not seam to get it going again. when i first got it going i installed fresh SL (with Radeon 4550 Graphics card installed) installed 10.6.5 update installed [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] easy install. rebooted three days later i received my Saphire 5670. I removed the 4550, installed the 5670. booted up and it all worked stright out of the box. unfortunately while trying to change the machine identifier i destroyed somthing and was unable to boot at all. so decided to do a fresh install. however i can not get the card to work again. i get as far as installing 10.6.5. after that it will not boot again with the 5670. if i take the 5670 out and put the 4550 back in it will boot with and without -x, but of course is 1024x768 max. Quote Link to comment Share on other sites More sharing options...
StingerAlex Posted January 30, 2011 Share Posted January 30, 2011 I am sorry, may be I am missing something because I am a fresh new for MAC administering. But what is "Graphics update 1.0"? Sorry, I am going to buy exact same card. Quote Link to comment Share on other sites More sharing options...
bcc9 Posted February 4, 2011 Share Posted February 4, 2011 I am sorry, may be I am missing something because I am a fresh new for MAC administering. But what is "Graphics update 1.0"? Sorry, I am going to buy exact same card. The radeon hd 5670 works under OSX with kabyl's chameleon rc5 branch, with QE/CI. No ATI kext hackery or injectors or rom images required, assuming you're running current OSX first (10.6.6), which would already include "Graphics update 1.0". See http://www.insanelymac.com/forum/index.php...t&p=1546946 Quote Link to comment Share on other sites More sharing options...
alonan100 Posted February 23, 2011 Share Posted February 23, 2011 I can confirm that this works on Asus EAH 5570 Silent DDR2 1 GB Quote Link to comment Share on other sites More sharing options...
TechnoLurker Posted March 9, 2011 Share Posted March 9, 2011 Does sound work through the HDMI output with this card? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.