marionez Posted November 19, 2010 Share Posted November 19, 2010 My minitower desktop case is equipped with a bright blue led, connected on +5V molex connector: In this way when the PC is powered on the LED is on, and when is off there's no power on the molex and on LED The problem is that with that connected auto sleep doesn't work, if I disconnect that LED, autosleep works! "Forced" sleep works in both cases with or without the LED and it's native. So, at the end, I thought someone else should be in my same situation and I would like to share this. ; Update: autosleep works with power led connected directly into the motherboard pins +5V - and as already stated not into the molex. Link to comment Share on other sites More sharing options...
Recommended Posts