Jump to content

DSDT Auto-Patcher

MaLd0n

By MaLd0n,
in Patches

 Share
5,756 posts in this topic

Recommended Posts

MaLd0n
MaLd0n
Posted
  • Author
Posted
Hay any one can please, provide me the DSDT patch for this motherboard

Please reply

I do not want the bios

I just want the files and the DSDT

send me files

http://www.insanelymac.com/forum/index.php...st&id=81816

 

Hey Mald0n! :)

 

First of all, ok, I'm willing to do everything now, you are the boss! :)

 

So, I finally deleted the NullCPUPowermanagment.kext, but unfortunately, I receive the KP at "AppleIntelCPUPM.kext".

 

What am I expected to do know? My kextstat is in the last post if you need it.

 

 

Thanks!

xxmacmanxx

HPET enable in bios setup?

do you need a...

http://www.insanelymac.com/forum/index.php?showtopic=258611

 

Hey Mald0n!

 

Two things:

 

1. Would you have the auto sleep fix for a Gigabyte Z68-UD5-B3 (F7) motherboard?. I can force system to sleep and wake without issues but wont auto sleep. I don't have a CD-ROM or equiv connected not using USB3.0 drivers.

 

2. Any workaround/fix for facetime running on sandy bridge processors?. Chameleon 755 is not supported on these processors which appears to be the only working solution out there.

 

Thxs

 

MOBO: GB Z68-UD5-B3, F7

MEM: 16GB 1600Mhz

HD: Crucial 128GB SSD3

OS: LION, 10.7

http://www.insanelymac.com/forum/index.php?showtopic=182535

 

I have an MSI Eclipse x58. Will the MSI x58m options work for that?

Nope

send me files

http://www.insanelymac.com/forum/index.php...st&id=81816

Link to comment
Share on other sites
xxmacmanxx
xxmacmanxx
Posted
Posted

Hi Mald0n!

 

Yes, HPET is enabled in BIOS, I checked it.

 

About the speed stepper, I'm not sure if it's made for every board , because in the first line of the thread it says:

 

SpeedStepper is a command-line tool that patches AppleIntelCPUPowerManagement.kext to load on ASUS P67 boards.

 

Do you think it's working for me?

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hey Mald0n...

 

I've been trying for 2 weeks to get my DSDT patched for CMOS reset fix, OS Emu, HPET fix, sleep/shutdown and also to no avail to get my ALC889 audio working...

 

I've tried [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], with DSDT, with HDAEnabler, I've also tried VoodooHDA (with removed HDAEnablers and AppleHDA of course) and nothing works. I can't get more than a simple Intel Audio with ID 889 in system profiler, and while using DSDT patches I get nothing. I also tried bin patched AppleHDA.kexts from 10.6.3, 4, 5, 6, 7 and 10.6.8.

 

I've tried at least 7 different DSDT patches, and I still haven't found a solution.

 

My motherboard is an AMD Gigabyte board (GA-790FXTA-UD5) and is revision 1.0.

 

Processor: AMD Phenom II x2 545 -> working

6 GB DDR3 @ 1333 MHz: Corsair and G.Skill -> only 4GB working with legacy_kernel for 32 bit apps

South Bridge: SB750 (6 SATA II ports, 1 PATA channel) -> working

North bridge: 790FX (PCI-E 2.0 x16) -> using ATI HD 6870 with non-functional HDMI audio

Audio chipset: ALC889 (with Dolby HD) -> not working

Ethernet : 2x Realtek 8111D -> working

eSATA: JMicron 3683 -> working

USB 3.0: Reneses -> working

SATA 3.0: Marvell SE9128 (2 SATA III ports) -> working

1394a (firewire): built-in -> working

 

Audio has : 6 ports and supports 7.1 audio (with mic-in, line-in, and 4 stereo outputs)

 

Everything works except for CMOS reset, other necessary fixes, sleep, shutdown, restart, and most of all... audio (nor ALC889 nor HDMI).

 

If you could help me out that would be great! Thanks B)

 

I've uploaded a clean DSDT from the latest beta bios I'm using (F3J) and using your tool!

 

-xian1243

dsdt.xian1243.zip

 

 

Hello!

I have a ZOTAC ND22, Link to ZOTAC Hompage

this is a nice little barebone with a celereon SU2300 1,2ghz, 4GB RAM. I replaced the WiFi card with a Broadcom (works out of the box).

 

I tried a lot but sleep, shutdown, restart don't work. Now I did a clean new SL install with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so far no [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] I still boot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].

 

There is already a thread about the barebone, unfortunately the dsdt doesn't work

http://www.insanelymac.com/forum/index.php?showtopic=237091

 

 

send_me.zip

 

I would much appreciate, if you could support the ZOTAC ND22 and create a dsdt

 

Best regards

Tom

dsdt.pred8er.zip

Link to comment
Share on other sites
xian1243
xian1243
Posted
Posted

But I AM! :D

 

I'm using Macman's ALC8xx legacy audio kext in /extra/extensions...

 

and I'm using 10.6.2's AppleHDA.kext (HDA rollback in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url])!

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
But I AM! :D

 

I'm using Macman's ALC8xx legacy audio kext in /extra/extensions...

 

and I'm using 10.6.2's AppleHDA.kext (HDA rollback in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url])!

ALC8xx in AMDs

dont work

Link to comment
Share on other sites
Tristano
Tristano
Posted
Posted
dsdt.Tristano.zip

remove EvOreboot, NullCPUPowerManagement

add in boot.plist

<key>GeneratePStates</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>

hi MaLd0n

I repaired permissions and the snow does not start up: (.

dst.aml fault of course, if I take it the system boots normal

depends on what?

you can help me.

thanks

Link to comment
Share on other sites
JBraddock
JBraddock
Posted
Posted

Thank you for this. I managed to install and get everything working on 10.6.3 but when I updated to 10.6.7 or 10.6.8, I have problems. I solved usb and firewire related problems but I get stuck at Still Waiting for root device. I tried Chameleon keys but no luck. I haven't tried 10.6.6 yet. Any idea?

Thanks,

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
hi MaLd0n

I repaired permissions and the snow does not start up: (.

dst.aml fault of course, if I take it the system boots normal

depends on what?

you can help me.

thanks

post photo

use -v

 

Thank you for this. I managed to install and get everything working on 10.6.3 but when I updated to 10.6.7 or 10.6.8, I have problems. I solved usb and firewire related problems but I get stuck at Still Waiting for root device. I tried Chameleon keys but no luck. I haven't tried 10.6.6 yet. Any idea?

Thanks,

Humm

The problem is IOATA fix?

try it

dsdt.02.zip

Link to comment
Share on other sites
xxmacmanxx
xxmacmanxx
Posted
Posted

Hi Mald0n!

 

flAked helped me out with speed stepping. :) I don't need this NullCPUPowerManagment anymore. Thank you!

 

Next thing is the audio problem. I saw some posts about binary-patching and dsdt patching but I don't really understand what they want from me. Can you help me? ;)

 

Thanks!

xxmacmanxx

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hi Mald0n!

 

flAked helped me out with speed stepping. ;) I don't need this NullCPUPowerManagment anymore. Thank you!

 

Next thing is the audio problem. I saw some posts about binary-patching and dsdt patching but I don't really understand what they want from me. Can you help me? :)

 

Thanks!

xxmacmanxx

read it

http://olarila.com/forum/viewtopic.php?f=17&t=212

Link to comment
Share on other sites
blindjackal
blindjackal
Posted
Posted

Hello,

 

Can you make DSDT Auto Patcher for Dell XPS M-1210 too ?

 

Dell XPS M1210 MXC062

CPU : Intel Core 2 Duo T7200 (2 GHz, 4 MB L2 cache, 667 MHz FSB) (Intel 82801G ICH7 Family)

RAM : Kingston HyperX Performance SO-DIMM 4 Go (Kit 2x 2 Go) DDR2-SDRAM PC5300 CL4 - KHX5300S2LLK2/4G

Graphic card : NVidia GeForce Go 7400 TurboCache (G72M) (256Mb) - (QE/QE2D/CI)

Sound : Sigmatel 9220

Storage : Intel X25-M SATA SSD 120 GB

Optical : 8x NEC DVD±RW ND-6650A Dual Layer with firmware 102C

LAN : Broadcom 4401 10/100

Wireless : WiFi Broadcom BCM4328 802.11a/b/g/n FastMac (Broadcom BCM94321MC)

Bluetooth : Dell Wireless 355 Bluetooth Module (Bluetooth 2.0 + EDR)

FireWire (IEEE 1394) : Ricoh R5C832 IEEE 1394 @ 400 MHz

Internal Card Reader : Ricoh R5C822

Keyboard/Trackpad (2 Finger Scrolling) / Multimedia front key

 

Or can you check/modify the file which I had made under Linux?

 

DSDT.aml.zip

 

Thanks a lot !!!

Link to comment
Share on other sites
MaLd0n
MaLd0n
Posted
  • Author
Posted
Hello,

 

Can you make DSDT Auto Patcher for Dell XPS M-1210 too ?

 

Dell XPS M1210 MXC062

CPU : Intel Core 2 Duo T7200 (2 GHz, 4 MB L2 cache, 667 MHz FSB) (Intel 82801G ICH7 Family)

RAM : Kingston HyperX Performance SO-DIMM 4 Go (Kit 2x 2 Go) DDR2-SDRAM PC5300 CL4 - KHX5300S2LLK2/4G

Graphic card : NVidia GeForce Go 7400 TurboCache (G72M) (256Mb) - (QE/QE2D/CI)

Sound : Sigmatel 9220

Storage : Intel X25-M SATA SSD 120 GB

Optical : 8x NEC DVD±RW ND-6650A Dual Layer with firmware 102C

LAN : Broadcom 4401 10/100

Wireless : WiFi Broadcom BCM4328 802.11a/b/g/n FastMac (Broadcom BCM94321MC)

Bluetooth : Dell Wireless 355 Bluetooth Module (Bluetooth 2.0 + EDR)

FireWire (IEEE 1394) : Ricoh R5C832 IEEE 1394 @ 400 MHz

Internal Card Reader : Ricoh R5C822

Keyboard/Trackpad (2 Finger Scrolling) / Multimedia front key

 

Or can you check/modify the file which I had made under Linux?

 

DSDT.aml.zip

 

Thanks a lot !!!

send me complete files

http://www.insanelymac.com/forum/index.php...st&id=81816

Link to comment
Share on other sites
xxmacmanxx
xxmacmanxx
Posted
Posted
For Realtek (ALC88x) replace the 4 instances of 85 08 EC 10 (inverted bytes of codec 0885 and vendor 10EC) by your codec, for example, 88 08 EC 10.

 

Use an hex editor (0xED) or the command

Código:

sudo perl -pi -e 's|\x85\x08\xec\x10|\x88\x08\xec\x10|g' /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA

 

 

For Analog Devices (AD) replace the 4 instances of 8B 19 D4 11 by your codec

Código:

sudo perl -pi -e 's|\x8b\x19\xd4\x11|\x9b\x98\xd4\x11|g' /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA

 

 

Ok, I have a question. I have a ALC887 Codec. What Number should i use?

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...