EduFrazao Posted September 24, 2010 Share Posted September 24, 2010 Hi all. Im trying to install a iAtkos s3 1.6.3 version 2, Intel Only release, on my Dell Latitude D530. My Config: Intel® Core2 Duo CPU T7250 @ 2.00GHz 4GB RAM DDR2 667 -- LSPCI founds 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) -- The installation goes OK. Ive removed the RTC Patch, because it causes kernel panic on the pos install. Ive installed the system with the 3100 Driver, and with it, the system loads ok, but, after load, comes a blue screen, and latter a black screen. Nothing more. Without the GMA3100 driver, the system goes directly to a black screen. I can even hear a song playing on the first boot. My Network controller works, and my soundcard too. I tryed to boot with -x, -f, -s (sinlge user)... With single user, it works, but no GUI, course. The other options have no change. Always black screen. With -v, I can see any fatal errors. Only some warnings about USB. Someone can Helpme? I already have read various posts about that, and try the tips described, but nothing works... Many thanks, and sorry by my poor english! -- Eduardo Quote Link to comment Share on other sites More sharing options...
Nameci Posted September 24, 2010 Share Posted September 24, 2010 have you selected GMA x3100 EFI string to load on bootloader? You must select the appleintelGMAX3100FrameBuffer aswell Quote Link to comment Share on other sites More sharing options...
EduFrazao Posted September 24, 2010 Author Share Posted September 24, 2010 Hmm. Im not sure.. I Will reinstall to enforce that everything is installed. I only have to configure on the instalation, or have some parameter that I will need to configure manually on boot.plist? Many thanks! Quote Link to comment Share on other sites More sharing options...
EduFrazao Posted September 24, 2010 Author Share Posted September 24, 2010 have you selected GMA x3100 EFI string to load on bootloader? You must select the appleintelGMAX3100FrameBuffer aswell Now, Ive reinstalled again, and i checked EFI String on the installation, and so, the GMA3100FrameBuffer. I need do configure it in another place? The same thing occours. A Blue Screen, followed by a Black Screen. I can hear the song played on the first boot of the system (I believe that it may be a animation, or a wellcome presentation, etc).. Any other tip? Many thanks by atention!!! Quote Link to comment Share on other sites More sharing options...
Nameci Posted September 25, 2010 Share Posted September 25, 2010 it means your x3100 gfx does not support QE/CI out of the box. If you can hear "staying alive" music it means that you have successfully installed it, if you may you can attached a second monitor on your laptop, the video might have redirected there... Quote Link to comment Share on other sites More sharing options...
seregawave Posted September 25, 2010 Share Posted September 25, 2010 Good afternoon, friends. I have the same problem with my laptop hp dv6 pavilion 1129tx. I also install iAtkos 10.6.3 s3 v2. A also hear "staying alive" music, but have problem with my graphic driver ATI Radeon HD 4500. Help me also please, give me some advice please. Thanks. Quote Link to comment Share on other sites More sharing options...
seregawave Posted September 25, 2010 Share Posted September 25, 2010 This is my problem with monitor if you may you can attached a second monitor on your laptop, the video might have redirected there... this is don`t help me Quote Link to comment Share on other sites More sharing options...
EduFrazao Posted September 27, 2010 Author Share Posted September 27, 2010 Thanks by help. Yes, I can hear de "Stay Alive" song, and I have attached a VGA monitor on my laptop, but only a gray screen appears on it. Exist another work around to this problem? Many thanks! Quote Link to comment Share on other sites More sharing options...
Gen0 Posted September 27, 2010 Share Posted September 27, 2010 Thanks by help.Yes, I can hear de "Stay Alive" song, and I have attached a VGA monitor on my laptop, but only a gray screen appears on it. Exist another work around to this problem? Many thanks! GMA is really not recommended, but try a reinstall and the natit kext. It sould give you some kind of screen output, though QE/CI is not guaranteed. Quote Link to comment Share on other sites More sharing options...
Nameci Posted September 27, 2010 Share Posted September 27, 2010 i have the same gfx card GMA x3100, it is the same card as with the MacBook4,1. So basically it would be compatible. My revision number is 0x0003 if that would matter. I think your revision is 0x000c. Try to look a workaround for it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.