248 replies to this topic

[Mohamed Khairy]

SGr33n, on Oct 16 2010, 02:13 PM, said:

VEN: 8086
DEV: A001


Tnx

are you sure

this 8086 is for intel i need nvidia card

can you run lspci on terminal and copy it to topic  

[Rusna]

Here's my lspci from 1215N, I hope I can help!

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
04:00.0 VGA compatible controller: nVidia Corporation Device 0a76 (rev a2)

[Mohamed Khairy]

Rusna, on Oct 16 2010, 04:56 PM, said:

Here's my lspci from 1215N, I hope I can help!

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
04:00.0 VGA compatible controller: nVidia Corporation Device 0a76 (rev a2)

can you use this command
lspci -nn

[Rusna]

Here:

00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a002] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01)
04:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0a76] (rev a2)

And as you can see, I'm with BCM4313 with 14e4:4727, so that's my curse
If someone finds a way to make that Broadcom to work, I'd even consider to donate

You wanted screenshot from gpuz, right? Here it is:
 gpu.gif   16.42K   152 downloads

[Mohamed Khairy]

Rusna, on Oct 16 2010, 04:59 PM, said:

Here:

00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a002] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01)
04:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0a76] (rev a2)

And as you can see, I'm with BCM4313 with 14e4:4727, so that's my curse
If someone finds a way to make that Broadcom to work, I'd even consider to donate

for this card nearly impossible
you can buy wlan pcie or usb card compitable with mac
about gfx iam trying on it

[Rusna]

Check previous post, I posted gpuz picture.

[Mohamed Khairy]

i made boot loader from meklort branch
i added ion2 to nvidia.c
and gma3150 to gma.c
hope it works
use
GraphicsEnabler=yes
 i386.zip   503K   270 downloads

[Rusna]

Thanks,

Sorry for being a bit newbie here, but how do I proceed with those files? At the moment I have Win7 and Ubuntu on that machine, but I'm planning to wipe it clean with SL. But I haven't installed SL on a netbook before, how do I proceed?

I'll prepare USB stick with NBM for SL and install SL?
And then install Chameleon? How about those files you posted?

I hate being such a newbie. Well you gotta start learning hackintoshing from somewhere, right

[Mohamed Khairy]

Rusna, on Oct 16 2010, 09:44 PM, said:

Thanks,

Sorry for being a bit newbie here, but how do I proceed with those files? At the moment I have Win7 and Ubuntu on that machine, but I'm planning to wipe it clean with SL. But I haven't installed SL on a netbook before, how do I proceed?

I'll prepare USB stick with NBM for SL and install SL?
And then install Chameleon? How about those files you posted?

I hate being such a newbie. Well you gotta start learning hackintoshing from somewhere, right

wait when get it work will make  bootcd for it

[H17737]

thx a lot Mohamed Khairy
witing for someone to manga to get a fully working SL to buy a 1215n

[Mohamed Khairy]

to people dont know how to use this boot file
use this
put it on mac partion
put first delete boot file on mac partion
and then paste what contain mac folder to mac partion
 mac.zip   150.26K   177 downloads


you will get
gma3150 identified
but it need to customize kexts
if we get it works it will be good

[technofes]

got some new probs
i also using sl on 1215n...
used sl 10.6.3 iso to make my usb stick
after install on usb stick finished i uses netbookinstaller on the usb stick to boot from
boot from usb stick let me install sl on the intern hd

i boot from usb stick and choose my fresh sl installation from hd
first boot will take some time...but sl will start...
my problem is, i cant boot into sl without the usb stick..
if i drop the stick and boot from hd - a grey screen appears - nothing more..
chameleon is installed... the chameleon screen on startup appears - i can choose win7 or osx
on osx grey screen - stop
with booting from usb stick my fresh sl installation boots up and works..
anyone can help me out to fix this problem?
thx.

[hap]

Mohamed Khairy, on Oct 16 2010, 04:06 PM, said:

did you tried to inject gfx

if not please

write name of gfx chipset and DEV ID AND VEN ID

 image1.jpeg   72.13K   284 downloads
 image.jpeg   65.42K   243 downloads

Attached Files

•  image1.jpeg   72.13K   216 downloads

[Rusna]

Mohamed Khairy, on Oct 17 2010, 12:50 AM, said:

wait when get it work will make  bootcd for it

Alright. Using boot CD and original SL disc is no problem for me since I can put external DVD drive to my 1215N. So no need to worry about USB-boot stuff. Though many users will most likely like that also

So is your main objective to get the integrated gma3150 to work or are you trying to focus on ion2? It seems that gpu switching in OSX is something we can forget immediately, so as long as we get either to work, would be great.

Does anyone know if Adobe's Flash supports GPU acceleration on any other GPUs than those that come in iMac/Macbooks etc? So in this case, ion2 preferably?

Now just GPU with QI/CE and sleep to work and I'd be ready to hit OSX in this machine. I already have a wifi usb dongle waiting

[H17737]

Rusna, on Oct 17 2010, 01:11 PM, said:

Alright. Using boot CD and original SL disc is no problem for me since I can put external DVD drive to my 1215N. So no need to worry about USB-boot stuff. Though many users will most likely like that also

So is your main objective to get the integrated gma3150 to work or are you trying to focus on ion2? It seems that gpu switching in OSX is something we can forget immediately, so as long as we get either to work, would be great.

Does anyone know if Adobe's Flash supports GPU acceleration on any other GPUs than those that come in iMac/Macbooks etc? So in this case, ion2 preferably?

Now just GPU with QI/CE and sleep to work and I'd be ready to hit OSX in this machine. I already have a wifi usb dongle waiting

I think there wouldn't be much difference on Adobe's GPU use, ION 2 is GT 310M based and MB Pros are 330M based. AFAIK both have the exact same architecture and differentiate only in number of SPs or RAM frequency. So if someone gets the ION 2 to be actived, GPU acceleration shouldn't be an issue.

I don't think anyone would get the GPU switch to work, plus, I havn't seen any working GMA 3150 on the forum, the above solution may be a dead end. Someone should try to make a script to enable the ION 2 at launch but all this isn't only an OSX issue, I think linux guys are also working on that and that it should be portable.

But if you can get the switch and both cards to work, it will be the best OSX netbook ever

[Rusna]

I would personally be more than happy for just ion2 chipset, of course, we'd have to accept the loss in battery life, but hey, at least for me, Flash acceleration plays important role. I want to be able to watch 720p Youtube (minimum) Fullscreen. With integrated gma3150 it's not happening in Ubuntu, and of course in Windows with ion2's help, it's no problem.


Correct me if I'm wrong, but ion2 is by default "always on", this has been seen here, on the Hybrid Graphics Linux project's maling list.
The ion2 chip drains power all the time unless not forced off. So in my theory, if we can get OSX to handle the graphics with ion2 we should be good? If it's all the time powered on, it should be only kext issue to get it to work?

[Mohamed Khairy]

H17737, on Oct 17 2010, 03:53 PM, said:

I think there wouldn't be much difference on Adobe's GPU use, ION 2 is GT 310M based and MB Pros are 330M based. AFAIK both have the exact same architecture and differentiate only in number of SPs or RAM frequency. So if someone gets the ION 2 to be actived, GPU acceleration shouldn't be an issue.

I don't think anyone would get the GPU switch to work, plus, I havn't seen any working GMA 3150 on the forum, the above solution may be a dead end. Someone should try to make a script to enable the ION 2 at launch but all this isn't only an OSX issue, I think linux guys are also working on that and that it should be portable.

But if you can get the switch and both cards to work, it will be the best OSX netbook ever

gma3150 is i identified  by above boot laoder
but no kexts for
GMA950
X3100
INTELHD
iadded ID of card to this kexts but no one of them worked loaded


anther problem is bootloader cant patch nvidia ion2 rom
so it isnt identified  

may be when GMA3150 disabled nvidia card will work

so the possible solution
is asking ASUS to make key on bios setting to choose card you want to make it works  

[H17737]

I know that on the 10" version which has 7 starter preinstalled you have to rebbot to swap graphics, so you can enable only one card on the startup. It might help to know how this works exactly, wether the swap is done on bios on seven booting. Then, if it's done on bios someone could probably hack this feature to feat 1215n's one

[Mohamed Khairy]

H17737, on Oct 17 2010, 03:19 PM, said:

I know that on the 10" version which has 7 starter preinstalled you have to rebbot to swap graphics, so you can enable only one card on the startup. It might help to know how this works exactly, wether the swap is done on bios on seven booting. Then, if it's done on bios someone could probably hack this feature to feat 1215n's one

i dont have this netbook iam doing it with SGr33n's one

here is GFX0 ON DSDT

				Device (GFX0)
				{
					Name (_ADR, Zero)
				}

so nearly windows takes control of switching

we need to control it from bios

[Rusna]

In case someone finds it useful, here's my acpidump DSDT.dsl file created for the Hybrid Graphics Linux project.

 DSDT.txt   328.58K   118 downloads

I had to rename if from .dsl -> .txt to be able to upload.