248 replies to this topic

[nightroad]

Guys, maybe it's the problem with the Intel GMA 3150. Check out this link http://www.meklort.com/?p=188
As the author writes: Is it possible to run the chip X3150 to the maximum resolution. You need to check whether this is so.

[H17737]

resolution has never been an issue, you just need to edit the apple.com.boot.plist and put whatever resolution you want

[InoXio]

resolution has never been an issue, you just need to edit the apple.com.boot.plist and put whatever resolution you want

well as far as i was aware you could only set 4:3 resolutions that are suported nativly (1024x768 800x600 1280x1024) not any custom resolution ?

as i have tryed this with various resolutions and non work even 1366x768.

they next standerd res higher than 1024x768 is 1280x1024 which as u can see is 2 large verticly for the sceen.
just my experience

[H17737]

maybe, I'm not sure and don't have a hackintosh anymore
But when I had my brand new 4870 GPU, which didn't have kexts yet, I remember I could use whatever resolution I wanted. Plus, I'm pretty sure 1366x768 is standard, I think it's used in the new Macbook Airs

[InoXio]

sorry i ment the vesa standerd compatability resolutions. which are as i listed above and couple lower 1s i looked thru the list that is shown by chameleon if u go to grafics options menu or what ever its labaled as. would be nice if there was a place u could edit those and add ur own res but i assume thats what chameleon does if it knows ur chipset ?

sorry new to this lol

but have managed to triple boot my 1215n now osx win7 ubuntu 10.10 all working nicly even flash plays on osx aslong as its not HD lol would just love some video acceleration and native resolution to work

any 1 know how to get rid of the merklot stop message about unknown chipset ?

[SGr33n]

We made it work



This is the boot file to make it work.
Snow Leopard 10.6.5 required.

Thanks to Meklort & Mohamed Khairy

Attached Files

•  boot.zip   178.12KB   359 downloads

[Skogsguden]

We made it work



This is the boot file to make it work.
Snow Leopard 10.6.5 required.

Thanks to Meklort & Mohamed Khairy

Great, but still no Hardware Acceleration?

[Mohamed Khairy]

Great, but still no Hardware Acceleration?

not yet meklot mange to patch the other kext now framebuffer kext only patched

but it is good to work now with full reslution

when patcher is completed will collect all kexts and boot loader on bootCD

[H17737]

can you switch to ion ?

[Frosty the Snow man]

So how do I make this file to work?

[Mohamed Khairy]

So how do I make this file to work?

put boot on root

and modules folder on extra

and update to latest 10.6.5 rev 10h568

[Frosty the Snow man]

Ive installed os x into the second partition while keeping the original windows 7 installation.
When I install chameleon after os x installation is finished, It won't boot for some reason.
I can boot the installed os x partition when using the boot loader installed on the install usb stick.
However cant boot off the hard drive when using the chameleon installed on the same disk.
Is there any way to fix this? Thank!

[Mohamed Khairy]

hi people can you connect this netbook to display using HDMI

and use bootloader i made on this topic for this netbook and see if nvidia ion2 is activated from boot

if it is activated i think it will work

does any one tried this

[Frosty the Snow man]

Can some one please give me a guide to getting this to boot without the installer usb?
I can no longer dual boot nor boot off the hard drive without the usb. TRied reinstalling and everyting.
Thanks!

[Mohamed Khairy]

Can some one please give me a guide to getting this to boot without the installer usb?
I can no longer dual boot nor boot off the hard drive without the usb. TRied reinstalling and everyting.
Thanks!

use gparted cd to make mac is boot partion

and then if it isnt booted

install bootloader manual

[hap]

not yet meklot mange to patch the other kext now framebuffer kext only patched

but it is good to work now with full reslution

when patcher is completed will collect all kexts and boot loader on bootCD

 DSCN4219.jpg   458.31KB   290 downloads

I used boot & modules in 10.6.5(10H568)

still no kext loaded

[Mohamed Khairy]

 DSCN4219.jpg   458.31KB   290 downloads

I used boot & modules in 10.6.5(10H568)

still no kext loaded

use
arch=i386

[hap]

use
arch=i386

in com.apple.Boot.plist


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GraphicsEnabler</key>
<string>yes</string>
<key>UseNvidiaROM</key>
<string>yes</string>
<key>VBIOS</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>arch=i386</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1366x768x32</string>
<key>Theme</key>
<string>Default</string>
<key>Timeout</key>
<string>5</string>
</dict>
</plist>

but still no kext loaded

and 1024x768x32

i used Chameleon

[Mohamed Khairy]

in com.apple.Boot.plist


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GraphicsEnabler</key>
<string>yes</string>
<key>UseNvidiaROM</key>
<string>yes</string>
<key>VBIOS</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>arch=i386</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1366x768x32</string>
<key>Theme</key>
<string>Default</string>
<key>Timeout</key>
<string>5</string>
</dict>
</plist>

but still no kext loaded

and 1024x768x32

i used Chameleon

use boot.zip that on this page

[hap]

use boot.zip that on this page

has been used boot.zip in my 1215n

but still no kext loaded

Can you give me the details of your computer