1cos Posted September 13, 2010 Share Posted September 13, 2010 Salve a tutti ecco il report del pc che tengo in salotto come home teatre pc; attualmente ho installato leopard ideneb 1.5.8 ma non riesco a far funzionare a dovere la scheda grafica, mi dice: core image: software e quarz extreme non supportato. in breve il pc è lentissimo, i divx vanno a scatti cosi come le animazioni delle finestre quando si minimizzano. Quindi sono a chiedervi : mi dareste una mano con la scheda in questione ? altro consiglio; 1 giga di ram sono poche per provare snow leopard e magari avere piu' fortuna con la scheda video ? aspetto aiuti e ringrazio anticipatamente Versione EVEREST v5.50.2100/it Modulo di benchmark 2.5.292.0 Home page http://www.lavalys.com/ Tipo report Creazione guidata report [ TRIAL VERSION ] Computer Saolotto-PC Creato da Saolotto Sistema operativo Microsoft Windows 7 Ultimate 6.1.7100 (Win7 RC) Data 2010-08-14 Ora 16:52 Riepilogo Computer: Tipo computer ACPI x64-based PC Sistema operativo Microsoft Windows 7 Ultimate Service pack [ TRIAL VERSION ] Internet Explorer 8.0.7100.0 DirectX DirectX 11.0 Nome computer Saolotto-PC Nome utente Saolotto Dominio [ TRIAL VERSION ] Data / Ora 2010-08-14 / 16:52 Scheda madre: Tipo processore DualCore Intel Pentium D 930, 3000 MHz (15 x 200) Nome scheda madre Asus P5N73-CM (2 PCI, 1 PCI-E x1, 1 PCI-E x16, 2 DDR2 DIMM, Audio, Video, Gigabit LAN) Chipset scheda madre nVIDIA nForce 7100-630i Memoria di sistema [ TRIAL VERSION ] DIMM1: Infineon AET660UD00-370A98Z 512 MB DDR2-533 DDR2 SDRAM (5-4-4-12 @ 266 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz) DIMM2: Infineon AET660UD00-370A98Z [ TRIAL VERSION ] Tipo BIOS Award (09/11/08) Porta di comunicazione Communications Port (COM1) Porta di comunicazione ECP Printer Port (LPT1) Scheda video: Adattatore video NVIDIA GeForce 7100 / NVIDIA nForce 630i (Microsoft Corporation - WDDM) (128 MB) Adattatore video NVIDIA GeForce 7100 / NVIDIA nForce 630i (Microsoft Corporation - WDDM) (128 MB) Acceleratore 3D nVIDIA GeForce 7100 Schermo Generic PnP Monitor [NoDB] (0000000) Multimedia: Periferica audio VIA VT1708B CE @ nVIDIA MCP73 - High Definition Audio Controller Archiviazione: Controller IDE Standard AHCI 1.0 Serial ATA Controller Controller IDE Standard Dual Channel PCI IDE Controller Unità floppy Floppy disk drive Unità disco EMTEC U3 Smart Drive USB Device (1967 MB, USB) Unità disco MAXTOR STM3320820AS ATA Device (320 GB, 7200 RPM, SATA-II) Unità ottica PIONEER DVD-RW DVR-111D ATA Device (DVD+R9:8x, DVD-R9:8x, DVD+RW:16x/8x, DVD-RW:16x/6x, DVD-ROM:16x, CD:40x/32x/40x DVD+RW/DVD-RW) Stato dei dischi fissi SMART OK Partizioni: C: (NTFS) [ TRIAL VERSION ] Capacità [ TRIAL VERSION ] Periferiche di input: Tastiera HID Keyboard Device Mouse HID-compliant mouse Rete locale: Indirizzo IP primario [ TRIAL VERSION ] Indirizzo MAC primario 00-23-54-A9-83-6D Adattatore di rete NVIDIA nForce Networking Controller Periferiche: Stampante Fax Stampante Microsoft XPS Document Writer Controller USB1 nVIDIA MCP73 - OHCI USB 1.1 Controller Controller USB2 nVIDIA MCP73 - EHCI USB 2.0 Controller Periferica USB Generic USB Hub Periferica USB USB Composite Device Periferica USB USB Input Device Periferica USB USB Input Device Periferica USB USB Input Device Periferica USB USB Mass Storage Device DMI: Produttore DMI del BIOS Phoenix Technologies, LTD Versione DMI del BIOS ASUS P5N73-CM ACPI BIOS Revision 0114 Produttore DMI di sistema System manufacturer Prodotto DMI di sistema System Product Name Versione DMI di sistema System Version Numero di serie DMI di sistema [ TRIAL VERSION ] UUID di DMI di sistema [ TRIAL VERSION ] Produttore DMI della scheda madre ASUSTeK Computer INC. Prodotto DMI della scheda madre P5N73-CM Versione DMI della scheda madre 1.XX Numero di serie DMI della scheda madre [ TRIAL VERSION ] Produttore DMI dello chassis Chassis Manufacture Versione DMI dello chassis Chassis Version Numero di serie DMI dello chassis [ TRIAL VERSION ] Asset DMI dello chassis [ TRIAL VERSION ] Tipo DMI dello chassis Desktop Case DMI [ BIOS ] Proprietà BIOS: Produttore Phoenix Technologies, LTD Versione ASUS P5N73-CM ACPI BIOS Revision 0114 Data rilascio 09/11/2008 Dimensione 1024 KB Periferiche di boot Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120 Caratteristiche Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS Standard supportati DMI, APM, ACPI, PnP Caratteristiche avanzate PCI, USB [ Sistema ] Proprietà di sistema: Produttore System manufacturer Prodotto System Product Name Versione System Version Numero di serie [ TRIAL VERSION ] ID unico [ TRIAL VERSION ] Tipo di attivazione Pulsante di accensione [ Scheda madre ] Proprietà della scheda madre: Produttore ASUSTeK Computer INC. Prodotto P5N73-CM Versione 1.XX Numero di serie [ TRIAL VERSION ] [ Chassis ] Proprietà chassis: Produttore Chassis Manufacture Versione Chassis Version Numero di serie [ TRIAL VERSION ] Asset [ TRIAL VERSION ] Tipo Desktop Stato di avvio Sicuro Stato alimentatore Sicuro Stato termico Sicuro Stato protezione Nessuno [ Processori / Intel® Pentium® D CPU 3.00GHz ] Proprietà processore: Produttore Intel Versione Intel® Pentium® D CPU 3.00GHz Velocità di clock in uscita 200 MHz Velocità di clock massima 3800 MHz Velocità di clock corrente 3000 MHz Tipo Central Processor Voltaggio 1.3 V Stato Attivo Upgrade ZIF Socket Socket 775 Unità HTT / CMP 1 / 2 [ Cache / L1 Cache ] Proprietà cache: Tipo Interno Stato Attivo Modalità operativa Write-Back Modalità associativa 4-way Set-Associative Dimensione massima 32 KB Dimensione installata 32 KB Tipo SRAM suppotata Synchronous Tipo SRAM corrente Synchronous Correzione d'errore Single-bit ECC Socket Cache L1 [ Cache / L2 Cache ] Proprietà cache: Tipo Interno Stato Attivo Modalità operativa Write-Back Modalità associativa 4-way Set-Associative Dimensione massima 4096 KB Dimensione installata 4096 KB Tipo SRAM suppotata Synchronous Tipo SRAM corrente Synchronous Correzione d'errore Single-bit ECC Socket Cache L2 [ Cache / L3 Cache ] Proprietà cache: Tipo Interno Stato Disattivato Modalità operativa Varies with Memory Address Dimensione massima 0 KB Dimensione installata 0 KB Tipo SRAM suppotata Synchronous Tipo SRAM corrente Synchronous Socket Cache L3 [ Periferiche di memoria / DIMM1 ] Proprietà memoria di periferica: Form factor DIMM Tipo DDR2 Dimensione 512 MB Velocità 533 MHz Capacità totale 64 bit Capacità dati 64 bit Etichetta della scheda dei circuiti DIMM1 Banco di memoria Bank0/1 Produttore Nessuno Numero di serie Nessuno Asset Nessuno Numero di serie Nessuno Quote Link to comment Share on other sites More sharing options...
verdant Posted September 13, 2010 Share Posted September 13, 2010 @ 1cos Follow the guide here...... Quote Link to comment Share on other sites More sharing options...
1cos Posted September 13, 2010 Author Share Posted September 13, 2010 hi and tnx i have just installed leopard 10.5.8 but i cant run the video card propelly with CI and QE any Suggest ? thank's Quote Link to comment Share on other sites More sharing options...
verdant Posted September 14, 2010 Share Posted September 14, 2010 hi and tnxi have just installed leopard 10.5.8 but i cant run the video card propelly with CI and QE any Suggest ? thank's Onboard GeForce 7100 GPU is not supported by OS X for CI/QE............so installing nVidia graphics drivers will not work......... Quote Link to comment Share on other sites More sharing options...
1cos Posted September 14, 2010 Author Share Posted September 14, 2010 i'm back with a new grafic card ... now i' have installed an nvidia en210 512mb any suggest? sorry for my english ... and thank's a lot Quote Link to comment Share on other sites More sharing options...
verdant Posted September 14, 2010 Share Posted September 14, 2010 i'm back with a new grafic card ... now i' have installed an nvidia en210 512mb any suggest? sorry for my english ... and thank's a lot With a GeForce® 210 GPU 512MB DDR2 graphics card, you should be able to follow the guide here...... Quote Link to comment Share on other sites More sharing options...
1cos Posted September 14, 2010 Author Share Posted September 14, 2010 Do you think i can do with the snow Leopard of hazzard 10.6.1 10.6.2 ? Becouse i dont have the DVD retail and i dont have any 8 giga USB support. Quote Link to comment Share on other sites More sharing options...
verdant Posted September 14, 2010 Share Posted September 14, 2010 Do you think i can do with the snow Leopard of hazzard 10.6.1 10.6.2 ?Becouse i dont have the DVD retail and i dont have any 8 giga USB support. Try with iATKOS S3 v2.......... The S3 DVD can boot into 5 kernels: qoopz 10.3.0, qoopz 10.2.0, pcj 0.9 10.2.0, atom 10.3.0 and the modbin 10.0.0 kernel. It boots into qoopz 10.3.0 by default but you can boot using any of the following kernel boot flags, if the default does not work...... "mach_qoopz" for qoopz 10.2.0 "mach_pcj" for pcj v0.9 10.2.0 "mach_atom" for atom 10.3.0 "mach_modbin" for modbin 10.0.0 But your Pentium D (which AFAIK does not support SSSE3 and so you should use a patched kernel) boots into qoopz 10.3.0, so in the Installer Customise menu, initially select the options shown in BOLD here: > iATKOS S3 Main System [Pre-selected Default] > Bootloader >> AsereBLN v1.19 [Default] >> PC_EFI v10.6 >> Slice >> AnVAL Loader >> Chameleon v2 RC5 >> Chameleon v2 RC4 > Bootloader Options >> 32-bit boot >> Graphics Enabler >> -pci1 >> Ethernet >> USB (USBBusFix; EHCIacquire; UHCIreset) >> Quiet Boot >> Legacy Logo >> UUID [selecting this breaks HDD multiboot options] > Patches >> /Extra directory [Default] >> fakesmc [Default] V2.5 [MUST BE SELECTED] >> Disabler [Default] >> RTC (RTC [Default]; RTC(32bit)) >> Modified Kernels (qoopz 10.3.0; qoopz 10.2.0; PCJ kernel; Atom Kernel) >> EVO Reboot [Default] >> Sleep Enabler >> USB >> UUID > Drivers >> Main Hardware >>> SATA/IDE (AHCI SATA; Intel SATA/IDE; JMicron SATA/IDE; VIA SATA/IDE (support for VIA, SiS, SI, ULI, Marvell and some nForce chipsets); nForce SATA/IDE) >>> Sound (Voodoo HDA [Default]; Apple HDA 10.6.2 [Default]) "But your audio may be VIA VT1708 and may not work with VoodooHDA but try....." >>> PS/2 (Apple PS/2; Voodoo PS/2) [i am assuming you have a PS/2 keyboard and mouse; if not, then ignore PS/2] >>> CPU Power Management (Voodoo P-State; Voodoo Power; EvO Speedstep) >>> Laptop Hardware (Battery; Card Reader; TSC Sync; ACPI Thermal (32bit) >>> NTFS-3G (Mac FUSE Core; NTFS-3G [automatic sub-selection]) >> VGA >>> nVidia >>>> EFI String (DVI/DVI; DVI/VGA; VGA/DVI) >>>> Enablers (NVEnabler; Natit) >>> ATI >>>> Enablers (EVO enabler; ATY-Init (32bit) >>>> ATI 48xx >>>> ATI Framebuffer >>> Intel >>>> EFI String >>>> Natit (32bit) >>>> GMA 950 (GMA 950 27A2 (32bit); GMA 950 27AE (32bit)) >>>> GMA X3100 (Framebuffer (32bit) >> Network >>> Wireless >>>> Atheros >>>> Atheros Corei7 fix >>>> Broadcom >>>> Ralink (RT257x; RT2500 (32bit); RT2870; RT2860 (32bit); RT256x (32bit)) >>>> Realtek (RTL8187 (32bit); RTL8187B (32bit); RTL8187L (32bit); RTL8187SE (32bit)) >>>> Zydas (32bit) >>> Wired >>>> Realtek (RTL8168; RTL8139) >>>> Marvell (Yukon 88E8001; Yukon 88E8056) >>>> Atheros (Attansic L1; Attansic L1E; Attansic L2 (32bit) >>>> Intel (Intel Pro V100; Intel Gigabit) >>>> Broadcom (BCM440x; BCM5755M (32bit); BCM5787M (32bit)) >>>> nForce >>>> Via Rhine (32bit) > Language Translations [Your choice] Quote Link to comment Share on other sites More sharing options...
1cos Posted September 23, 2010 Author Share Posted September 23, 2010 hi i'm trying to install iatkos s3 v2 but i have an efi string error in the cameleon screen i think the motherboard goes in conflict with the new graphic card i installed Quote Link to comment Share on other sites More sharing options...
1cos Posted September 23, 2010 Author Share Posted September 23, 2010 Don't sure about the graphic card becouse i tryed to remove it but the error still comes.. I tryed to boot with -v graphicenabler=yes and the error change in nvidia unknow device 512 mb pciroot (0x0).....and something about dsdt patched ..and then reboot...... Please help.... Maybe i need a patched dstd into the dvd iso and then install from that.... Or maybe boot with some flags that i dunno... Quote Link to comment Share on other sites More sharing options...
verdant Posted September 23, 2010 Share Posted September 23, 2010 Don't sure about the graphic card becouse i tryed to remove it but the error still comes..I tryed to boot with -v graphicenabler=yes and the error change in nvidia unknow device 512 mb pciroot (0x0).....and something about dsdt patched ..and then reboot...... Please help.... Maybe i need a patched dstd into the dvd iso and then install from that.... Or maybe boot with some flags that i dunno... What are the details of your graphics card? Quote Link to comment Share on other sites More sharing options...
1cos Posted September 23, 2010 Author Share Posted September 23, 2010 Nvidia 210 512mb ddr2 But the error is the same if i remove it Thanks for help. Quote Link to comment Share on other sites More sharing options...
verdant Posted September 23, 2010 Share Posted September 23, 2010 Nvidia 210 512mb ddr2But the error is the same if i remove it Thanks for help. With the GeForce 210, instead of GraphicsEnabler, you should try using NVEnabler or Natit or NVInject for Snow Leopard from here......... Quote Link to comment Share on other sites More sharing options...
1cos Posted September 23, 2010 Author Share Posted September 23, 2010 the really problem is that i'm not able to boot the installation ... i have this error when i boot from dvd to install and not post install ... i tryed to but with -x , -f , cpus1, and more else options but i cant' load the installation... Quote Link to comment Share on other sites More sharing options...
verdant Posted September 23, 2010 Share Posted September 23, 2010 the really problem is that i'm not able to boot the installation ... i have this error when i boot from dvd to install and not post install ...i tryed to but with -x , -f , cpus1, and more else options but i cant' load the installation... In your BIOS have you set it up for OS X and for using a PCI-E graphics card rather than the onboard GeForce 7100 GPU? Quote Link to comment Share on other sites More sharing options...
1cos Posted September 23, 2010 Author Share Posted September 23, 2010 yes maybe there is a bios patched for osx i have the 114 version bios Quote Link to comment Share on other sites More sharing options...
verdant Posted September 23, 2010 Share Posted September 23, 2010 yes maybe there is a bios patched for osx i have the 114 version bios Your MOBO has been run by others with Snow Leopard...........is your PIONEER DVR-111D PATA (IDE) DVDRW jumper-set and connected to your MOBO as Master, which it should be.......? Quote Link to comment Share on other sites More sharing options...
1cos Posted September 23, 2010 Author Share Posted September 23, 2010 Yes i was but now for sure i have installed a Sata lg DVD . Same thing... I am downloading the retail DVD of snow then we see if work with the guide have post up here Quote Link to comment Share on other sites More sharing options...
1cos Posted September 30, 2010 Author Share Posted September 30, 2010 I have installed iaktos to the pc where i'am actually writing from , but i have the same problem i had with ideneb. I can boot only if i click a key ripetutely during the loading.. Help plz. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.