Kabyl Posted September 21, 2010 Share Posted September 21, 2010 MrGreen, unfortunately, you need to edit and bin-patch kexts with the device id. Link to comment Share on other sites More sharing options...
buoo Posted September 22, 2010 Share Posted September 22, 2010 How about HD 5570 ? Which Framebuffer should be used in this case? Tipo: GPU Bus: PCIe Larghezza Lane PCIe: x16 VRAM (totale): 256 MB Fornitore: ATI (0x1002) ID dispositivo: 0x68d9 ID revisione: 0x0000 Informazioni su estensione Kernel: Nessun Kext caricato Monitor: Monitor: Risoluzione: 1024 x 768 Profondità pixel: Colore 32 bit (ARGB8888) Monitor principale: Sì Mirror: Spento Online: Sì Link to comment Share on other sites More sharing options...
slavke1976 Posted September 22, 2010 Share Posted September 22, 2010 Hi, i have same problem when instaling ati5000controller.kext, but before when i first tried that my ati 5770 card work well it was working well installing moded kexts and then i reinstall my snow leopard 10.6.4 and installed again and now when i try to install that ati 5000 drivers i have KP even with moded or no. Link to comment Share on other sites More sharing options...
buoo Posted September 22, 2010 Share Posted September 22, 2010 up Link to comment Share on other sites More sharing options...
els1952 Posted September 22, 2010 Share Posted September 22, 2010 Hi. Question: Works with ATI Radeon HD 5450 1GB DDR2 64bit PCI-E 2.0 HD-545X-YNH2 (XFX)? Tks. els Note: My current VGA (HD 3200 256M) works fine with resolution 1920x1080x32, but only the basic features of Mac OS X. Does not display pictures in the viewer. Does not show videos. Does not display even the cells of Numbers. VLC does not display video, only audio. Quick runs .mp4, video and audio. Audio ok but video slow. ... Question: With the HD 5450, will have these features? Link to comment Share on other sites More sharing options...
sirbow2 Posted September 22, 2010 Share Posted September 22, 2010 you did have pictures etc. because you didnt have QE/CI enabled Link to comment Share on other sites More sharing options...
els1952 Posted September 22, 2010 Share Posted September 22, 2010 you did have pictures etc. because you didnt have QE/CI enabled Tks. sirbow2. My HD 3200 haven't function QE/CI. Correct? The HD 5450 has QE/CI? els Link to comment Share on other sites More sharing options...
sirbow2 Posted September 22, 2010 Share Posted September 22, 2010 all veideo cards have QE CI you jsut have to enable it Link to comment Share on other sites More sharing options...
els1952 Posted September 22, 2010 Share Posted September 22, 2010 all veideo cards have QE CI you jsut have to enable it sirbow2. I am using for the HD 3200 kext (RadeonHD.kext). I read in the forum that the HD 3200 does not have QE/CI. http://www.insanelymac.com/forum/index.php?showtopic=190586 Please help me: how to enable QE/CI? Thank you. els Link to comment Share on other sites More sharing options...
sirbow2 Posted September 22, 2010 Share Posted September 22, 2010 what system do you have? AMD? snow leopard or leopard Link to comment Share on other sites More sharing options...
els1952 Posted September 22, 2010 Share Posted September 22, 2010 S.O.: Mac OS X 10.6.3 Snow Leopard RETAIL Hardware: PC ACPI x86 CPU: TripleCore AMD Phenom X3 8650, 2300 MHz (11.5 x 200) MB: Asus M3A78-EM (2 PCI, 1 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Video, Gigabit LAN) Chipset MB: AMD 780G, AMD K10 MEM: 4G = 2x OCZ Gold XTC OCZ2G10662G 2 GB DDR2-800 DDR2 SDRAM (5-6-6-18 @ 400 MHz) (4-5-5-15 @ 333 MHz) (3-4-4-12 @ 266 MHz) VIDEO: ATI Radeon HD 3200 Graphics (256 MB) (ONBOARD) VIDEO: ATI Radeon HD 3200 (RS780) (ONBOARD) AUDIO: ATI RS690 HDMI @ AMD RS780/RS880 Chipset - High Definition Audio Controller AUDIO: ATI RS690 HDMI @ ATI SB700 - High Definition Audio Controller IDE: AMD SATA Controller (AHCI) HD: SAMSUNG HM321HI SATA Disk Device (320 GB, 5400 RPM, SATA-II) DualBoot Windows 7 e MAC OS X 10.6.3 RETAIL CD/DVD/BLU-RAY (Player): HL-DT-ST BDDVDRW GGC-H20L SATA CdRom Device NETWORK: Realtek PCIe GBE Family Controller KEYBOARD: GoldShip 1088 (keyboard with mouse built (TrackBall)) Wireless (USB) els Link to comment Share on other sites More sharing options...
sirbow2 Posted September 22, 2010 Share Posted September 22, 2010 could you tell me your video card ID (dev and vendor Link to comment Share on other sites More sharing options...
els1952 Posted September 22, 2010 Share Posted September 22, 2010 EDITED: sirbow2. ATI Radeon HD 3200 Graphics: Chipset Model: ATI Radeon HD 3200 Graphics Type: GPU Bus: PCI VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9610 Revision ID: 0x0000 Displays: Display: Resolution: 1920 x 1080 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes els Link to comment Share on other sites More sharing options...
sirbow2 Posted September 22, 2010 Share Posted September 22, 2010 get EFI studio and make a EFI string for your GFX card, your ID is 96101002 then use OSX86tools to enable GL and you should have QE/CI restart and boot with -v -f now it should work from here: http://www.insanelymac.com/forum/index.php...00+snow+leopard the 3200 is pretty much a 2400 as said various places in the fourms Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted September 22, 2010 Author Share Posted September 22, 2010 How about HD 5570 ? Which Framebuffer should be used in this case? Tipo: GPU Bus: PCIe Larghezza Lane PCIe: x16 VRAM (totale): 256 MB Fornitore: ATI (0x1002) ID dispositivo: 0x68d9 ID revisione: 0x0000 Informazioni su estensione Kernel: Nessun Kext caricato Monitor: Monitor: Risoluzione: 1024 x 768 Profondità pixel: Colore 32 bit (ARGB8888) Monitor principale: Sì Mirror: Spento Online: Sì try all i don't know the best framebuffer for HD5500 AND HD5400 Link to comment Share on other sites More sharing options...
DR Mac Posted September 23, 2010 Share Posted September 23, 2010 Is the only way to extract GPU info from the windows program? I don't have anything installed on my Hackintosh. Can I use an OS X alternative? Thank you in advance. Link to comment Share on other sites More sharing options...
sirbow2 Posted September 23, 2010 Share Posted September 23, 2010 what type of info? like device ID etc., no you can look in system profiler or ioreg, probably other ways but that what i'd use Link to comment Share on other sites More sharing options...
DR Mac Posted September 23, 2010 Share Posted September 23, 2010 6- extract your gfx bios by gpuz under windows7-paste this bios on extra folder after naming it to 1002_xxxx.rom replace xxxx with your device id To be more specific, I'm worried about this step of the process. Is the system profiler exact enough? Link to comment Share on other sites More sharing options...
sirbow2 Posted September 23, 2010 Share Posted September 23, 2010 oh that part, yes that is one way. i bet there is a way to extract the bios in DOS, linux, or you could just download your rom from your manufactures website or from techpowerup. Link to comment Share on other sites More sharing options...
els1952 Posted September 23, 2010 Share Posted September 23, 2010 (1) get EFI studio and make a EFI string for your GFX card, your ID is 96101002 then use OSX86tools to enable GL and you should have QE/CI restart and boot with -v -f now it should work from here: http://www.insanelymac.com/forum/index.php...00+snow+leopard the 3200 is pretty much a 2400 as said various places in the fourms Thank you very much sirbow2. I will carefully execute their tips. But I did not understand properly the first step (1). How do I do?: get EFI studio and make a EFI string for your GFX card, your ID is 96101002. els EDITED: Note: My HD 3200 is onboard. See: http://www.insanelymac.com/forum/index.php...104997&st=0 Question: HD 5450 works fine? Link to comment Share on other sites More sharing options...
EL_Desperado Posted September 23, 2010 Share Posted September 23, 2010 did you tried all 30 framebuffers and if you did try use Kabyl bootloader what is your hardware specification can you take snapshot for graphics/display and pci cards from system profiler asus p5q /intel q6600 /4gb ddr2 /saphire 5770 1 gb /sata seagate 500gb Link to comment Share on other sites More sharing options...
sirbow2 Posted September 23, 2010 Share Posted September 23, 2010 nerver mind ive read some more, you cant get support for HD 3200 unless you downgrade to 10.5 ill help you get your HD 5450 going though. install GFX 1.0 from software update if you haven't already. down laod THIS file and put the boot file from the archive to the root of your chameleon drive. remove any previous GFX injectors, EX. aty_init then reboot on boot type exactly: AtiFb= after the = try any of the following framebuffers till one works, i'd try Uakari or Vervet first Alopias Alouatta Baboon Cardinal Caretta Colobus Douc Eulemur Flicker Galago Gliff Hoolock Hypoprion Iago Kakapo Kipunji Lamna Langur Megalodon Motmot Peregrine Quail Raven Shrike Sphyrna Triakis Uakari Vervet Zonalis So EX. AtiFb=Uakari or AtiFb=Vervet THE AtiFb= COMMAND IS CASE SENSITIVE unless you really mess something up it should work Link to comment Share on other sites More sharing options...
DR Mac Posted September 24, 2010 Share Posted September 24, 2010 I got my computer up and running yesterday using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ATI 5xxx-3, and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 2.2.2. I used a kext for the ethernet, and everything works perfect, except the fact that I'm using my GPU in 32bit mode. Since I already have the new Graphics 1.0 update installed, do I run any risk trying to do this? And I see that if I want to use Vervet, as I'm currently using now, I unzip that, and replace the boot file. But where am I suppose to be getting the .rom file for this installation? I apologize for being so naive. Link to comment Share on other sites More sharing options...
flipflp Posted September 24, 2010 Share Posted September 24, 2010 I got my computer up and running yesterday using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] ATI 5xxx-3, and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 2.2.2. I used a kext for the ethernet, and everything works perfect, except the fact that I'm using my GPU in 32bit mode. Since I already have the new Graphics 1.0 update installed, do I run any risk trying to do this? And I see that if I want to use Vervet, as I'm currently using now, I unzip that, and replace the boot file. But where am I suppose to be getting the .rom file for this installation? I apologize for being so naive. Hey there DR Mac, Since you have basically the same system as I do, motherboard, processor, etc. check out my extra folder and boot file from this setup. Using those you should be fine. Replace boot file in /Volumes Put the 1002_68b8.rom in /Extra/ Add UseAtiRom to your boot.plist like explained in this thread. XD3R_ver1.0_5770_64bit.zip Link to comment Share on other sites More sharing options...
DR Mac Posted September 24, 2010 Share Posted September 24, 2010 Hey flipflp, Thank you so much, kind sir, for such a wonderful gesture! I'm so excited to get home and try this out now! One last question that I have, do I need to remove Ati_Init file or can that stay? And after adding all of these files, I should use Kext Utility to repair permissions before rebooting, correct? Link to comment Share on other sites More sharing options...
Recommended Posts