LetThereBeDwight Posted August 8, 2010 Share Posted August 8, 2010 I am completely new to attempting to make a hackintosh, so I apologize in advance if anything I say is silly. I am attempting to install iatkos s3 V2 on my dell inspiron 1720 with the following: intel core 2 duo T7300 2.00 Dell Wireless 1390 Broadcom 440x 10/100 integrated controller GeForce 8600m GT When I boot my iatkos image(from a flash drive) using a lot of different options I get the Kernel Panic in the images below. Any help? Quote Link to comment Share on other sites More sharing options...
riws Posted August 8, 2010 Share Posted August 8, 2010 Tried with different Kernel to boot? Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 8, 2010 Share Posted August 8, 2010 i have read this before this problem is from RTC kext so i dont know how to disable it from loading in iatkos try this flags -x or -v -f if the same problem try to set up retial in my guide first way i hope it work for you Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 8, 2010 Author Share Posted August 8, 2010 Tried with different Kernel to boot? I'm not sure what this means. i have read this beforethis problem is from RTC kext so i dont know how to disable it from loading in iatkos try this flags -x or -v -f if the same problem try to set up retial in my guide first way i hope it work for you I got the same problem with -x and -v -f Thanks for the replies guys, hopefully I can get this running. Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 8, 2010 Share Posted August 8, 2010 I'm not sure what this means. I got the same problem with -x and -v -f Thanks for the replies guys, hopefully I can get this running. ok try anther kernel by this flags /mach_pcj -v if not work use this /mach_qoopz -v if not work you will need to setup retail Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 8, 2010 Author Share Posted August 8, 2010 ok try anther kernel by this flags /mach_pcj -v if not work use this /mach_qoopz -v if not work you will need to setup retail I tried both those flags and the same panic came up =[ I have however noticed that right before the panic, in verbose mode it says something to the effect of "no smbios replacement found". Could that have something to do with it? Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 8, 2010 Share Posted August 8, 2010 I tried both those flags and the same panic came up =[ I have however noticed that right before the panic, in verbose mode it says something to the effect of "no smbios replacement found". Could that have something to do with it? no this is normal you will need to follow retail guide of me Quote Link to comment Share on other sites More sharing options...
riws Posted August 9, 2010 Share Posted August 9, 2010 If you still have the iATKOS image, you could delete the ElliottForceLegacyRTC.kext from the image. Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 9, 2010 Author Share Posted August 9, 2010 If you still have the iATKOS image, you could delete the ElliottForceLegacyRTC.kext from the image. How would I go about doing that? I couldn't find it just navigating through finder or navigating through the folder in terminal. Quote Link to comment Share on other sites More sharing options...
riws Posted August 9, 2010 Share Posted August 9, 2010 Its in /Extra/Extensions/ or /Extra/Extensions.mkext or /System/Library/Extensions/ Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 9, 2010 Author Share Posted August 9, 2010 Its in /Extra/Extensions/ or /Extra/Extensions.mkext or /System/Library/Extensions/ No go finding it there with hfsexplorer, which sees .mkext as a file rather than a directory, so ill check it out with terminal and finder in a second. Quote Link to comment Share on other sites More sharing options...
riws Posted August 9, 2010 Share Posted August 9, 2010 You can delete /Extra/Extensions.mkext, then its going to load longer. Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 9, 2010 Author Share Posted August 9, 2010 If I delete that it'll take longer to load but no other issues? I couldn't find the kext in finder or through terminal, and I'm thinking about trying iatkos v7 and seeing if that works. Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 9, 2010 Share Posted August 9, 2010 If I delete that it'll take longer to load but no other issues? I couldn't find the kext in finder or through terminal, and I'm thinking about trying iatkos v7 and seeing if that works. ideneb v1.6 is good but i perfere that you set up snow leopard Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 9, 2010 Author Share Posted August 9, 2010 I tried deleting extensions.mkext and ended up at the screen attached, but I can't tell if it's doing anything or not. I'll look into ideneb, will that let me dual boot? Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 9, 2010 Share Posted August 9, 2010 I tried deleting extensions.mkext and ended up at the screen attached, but I can't tell if it's doing anything or not. I'll look into ideneb, will that let me dual boot? why you dont do i told you you will need to setup retail to put on it what you need of kexts if you want to get it pass Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 9, 2010 Author Share Posted August 9, 2010 why you dont do i told youyou will need to setup retail to put on it what you need of kexts if you want to get it pass I need to get a retail copy and that will take some time, I was hoping to get it done. Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 9, 2010 Share Posted August 9, 2010 I need to get a retail copy and that will take some time, I was hoping to get it done. I will help you when you get retail 10.6.3 dvd ready Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 9, 2010 Author Share Posted August 9, 2010 iatkos v7 got past it! its now installing, hopefully it works and ill be able to use it until I get a hold of snow leopard. Ill post if its successful and if its not..ill see you then. Thanks all =] Quote Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted August 9, 2010 Share Posted August 9, 2010 iatkos v7 got past it! its now installing, hopefully it works and ill be able to use it until I get a hold of snow leopard. Ill post if its successful and if its not..ill see you then. Thanks all =] this is because 10.5.x dont have rtc. kexts Quote Link to comment Share on other sites More sharing options...
LetThereBeDwight Posted August 10, 2010 Author Share Posted August 10, 2010 So I've successfully gotten osx to boot using iatkos v7, it corrupted my windows 7 partition but I've now gotten that to work, so I'm dual booting osx and windows 7! =] The touchpad and keyboard don't work in osx even though I had set the options for the ps2keyboard/mouse. Hopefully I can get that working. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.