Help Needed: Kernel Panic HP DV6 (dvd doesn't boot)

[mumair]

With the ATI [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], i get a kernel panic error while trying to boot from the OS X dvd. I even tried to boot into safemood with -x, but to no use. I tried the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] supported, both normally and safemode, but everytime a screen pops up telling me to restart my computer in 5 different languages.

 

There are no ACPI or AHCI settings in my HP DV6 BIOS. Following are my system specs:

 

Notebook: HP DV6 1235ee

Intel Core 2 Duo P7550

ATI Mobility RADEON HD 4530

Motherboard: HP 3628

Chipset: Intel PM45 (Cantiga-PM) + ICH9M (Base)

4GB DDR2-SDRAM

SATA TSSTCORP DVD Burner

SATA Western Digital 500 GB HDD

 

Also my BIOS is the latest version available on HP site dated 11-12-09(version: F.41)

I am attaching the screenshot of the kernel panic error that i get with the ATI [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Please help me out with it.

 

 

[Mohamed Khairy]

http://www.mediafire.com/?bg0iu5c23quiz9w

try this boot but i think you may have with it waiting root device

just try it and if it give to you

iwill add to it kexts for SB

what version you use 10.6 or 10.6.3

[mumair]

I am using 10.6. I tried the bootcd you gave me, but it also gives a kernel panic error. I am attaching the screenshot below:

 

[Mohamed Khairy]

I am using 10.6. I tried the bootcd you gave me, but it also gives a kernel panic error. I am attaching the screenshot below:

 

 

ok

use

this flag

rd(0,0)/extra/legacy_kernel -v

[mumair]

Ok so i used the flag u gave me and this screen pops up with it:

 

 

and then i tried empireEFI bootcd, both legacy and normal from here:

 

http://www.mediafire.com/?yimizgizuzz

 

 

 

 

and i can get to the installation screen using -x flag, but my touchpad does not work, cannot move the cursor or do anything. I can only pass through the first language selection screen by pressing "Enter", then because the touchpad does not work i cannot do anything futher: (my touchpad on windows is synaptics)

 

[Mohamed Khairy]

Ok so i used the flag u gave me and this screen pops up with it:

 

 

and then i tried empireEFI bootcd, both legacy and normal from here:

 

http://www.mediafire.com/?yimizgizuzz

 

 

 

 

and i can get to the installation screen using -x flag, but my touchpad does not work, cannot move the cursor or do anything. I can only pass through the first language selection screen by pressing "Enter", then because the touchpad does not work i cannot do anything futher: (my touchpad on windows is synaptics)

 

 

OK i downloading it and i will add to it ps2 controller

 

iwill upaod only boot cd normal

or use usb mouse just to install it then install kexts

[mumair]

Ok, thankyou so much for helping me out man, i've tried several forums and almost no one was helping me.

 

And by the way i tried this flag with the cd you gave me:

 

rd(0,0)/extra/legacy_kernel -v -x

 

i just added the -x, and it got me to the installation screen too, but again my touchpad was not working:

 

[Mohamed Khairy]

Ok, thankyou so much for helping me out man, i've tried several forums and almost no one was helping me.

 

And by the way i tried this flag with the cd you gave me:

 

rd(0,0)/extra/legacy_kernel -v -x

 

i just added the -x, and it got me to the installation screen too, but again my touchpad was not working:

 

 

what about usb mouse if you have

iwill try anther kexts for ps2

 

i replaced voodoo ps2

with apple ps2

ihope it work for you

http://www.mediafire.com/?inwn0dj6ia18iik#1

[mumair]

I tried your new bootcd, but the touchpad was still not working. I plugged in a USB mouse and it worked. Now, the next problem is that when i ran the disk utility, i found out that i have to repartition my whole harddisk and the whole of my data will be gone. I had set aside about 55gb space, and was hoping to install OS X in that 55gb partition without touching the rest of my partitions and thus keeping my data intact. Is there a way of doing that?

[Mohamed Khairy]

ok

you will need

aworking

mac osx

on pc or vmware

and flash memory

and follow second way on my guide

it contain what you want

[mumair]

Well i found a program gdisk, which let me convert my partition table from MBR to GPT(GUID), without any data loss. Now the problem is that when i installed mac i had to boot the cd with the flag -x, and now when mac is installed and i boot mac from the cd, i still have to use the -x flag, and mac boots up in safemode. Otherwise this screen comes and the OSX doesn't boot up properly(I haven't yet installed [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] though):

 

 

 

is it due to some kext missing? probably like a graphics driver? should i try installing [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]? or is there another way to fix this before installing [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]?

[Mohamed Khairy]

Well i found a program gdisk, which let me convert my partition table from MBR to GPT(GUID), without any data loss. Now the problem is that when i installed mac i had to boot the cd with the flag -x, and now when mac is installed and i boot mac from the cd, i still have to use the -x flag, and mac boots up in safemode. Otherwise this screen comes and the OSX doesn't boot up properly(I haven't yet installed [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] though):

 

 

is it due to some kext missing? probably like a graphics driver? should i try installing [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]? or is there another way to fix this before installing [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]?

this screen is from graphics kexts

in save mode no graphics kexts loaded

so search for your grahics kexts

and install it and the problem will go

good luck :censored2:

[mumair]

Thankyou so much man for ur help so far, i actually wasn't finding enough time to give to my mac installation and making everything work. Could you also guide me as to how can i delete specific kexts from my mac installation when im in safe mode with it?

[Mohamed Khairy]

Thankyou so much man for ur help so far, i actually wasn't finding enough time to give to my mac installation and making everything work. Could you also guide me as to how can i delete specific kexts from my mac installation when im in safe mode with it?

 

go to system folder

library

extension

delete what you want