Jump to content

[Guide] P6X58D Premium. Retail 10.6.4 Install. :)


  • Please log in to reply
246 replies to this topic

#181
tokyovigilante

tokyovigilante

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 131 posts

Hi guys, this is new AppleHDA for 10.6.5

enjoy ;)

Thanks! Working 100% on my P6X58D-E.

#182
magamin

magamin

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts

This is AppleHDA without any injectors, if you not have HDEF section in your DSDT and HDAenabler, the sound will not work. Layout 12.


Working now, I just have to copy your file to my Extra folder.

Thank you.

#183
Ended Zone

Ended Zone

    InsanelyMac Protégé

  • Members
  • Pip
  • 16 posts
  • Gender:Male
No sound for me.....
magamin...
how did you do it!
I've tried placing it in root/Extra
in Extentions
running it with Kext helper...
what else?!

EDIT:
I've managed to fix it!
BUT... sound only from back panel.... front is not working!

EDIT2:
Geekbench 32bit.... trial >>>> 12,000 Score!
Posted Image


No clock - 1866 Memory Auto timings 9500 Score @64bit Version of GeekBench!

#184
Bugagazavr

Bugagazavr

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 8 posts

No sound for me.....
magamin...
how did you do it!
I've tried placing it in root/Extra
in Extentions
running it with Kext helper...
what else?!

EDIT:
I've managed to fix it!
BUT... sound only from back panel.... front is not working!

I do not use the front panel and hence its work really do not know, now I looked info.plist, if you believe that there is described, then it should work with unfortunately there are some problems. Since he prescribed nodes and pinkonfig not me, I can not make the necessary changes for the correct operation of the front panel. Therefore, I will contact the person who was involved in the strands of nodes, perhaps he has an idea.

#185
Tona102

Tona102

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts
First of all, I have to thank to author of this guide for helping me build my own osx machine... Built in in two days, if i had initially installed nvidia card instead of ati it would be just a couple of hours... Ok, nevermind that! The point is, everything works, except audio is the same for me as with Ended Zone, only back ports (2).

BTW, how come that my FSB shows only 533 MHZ, (also in geekbench) Ended Zone's machine shows 7,20 GHZ, Is there a setting i've missed?

Thanks for any help!


Toni

Oh yes...
The specs:

Core i7 950 @ 3.07Ghz
6.00 GB 1603 Mhz DDR3 ram

#186
Ended Zone

Ended Zone

    InsanelyMac Protégé

  • Members
  • Pip
  • 16 posts
  • Gender:Male
You sure You didn't Set Slow Mode in BIOS ?

#187
Tona102

Tona102

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts
Update!

I managed to put audio device to play through front (headphone) and back ports also!

I used the Tonymac's ##### app, there i installed only (and really only!) under Advanced options -> Kexts -> Audio -> Legacy Hda - ALC889 and HDAEnabler - ALC889

Remember, to install only these two, i accidentally clicked something else and it was a mess, system profiler showed iMac and stuff, almost had to install all over again, but had manually fixed previous settings (guess i was lucky).

No need to run Kext utility after it finishes, just reboot...

Ended Zone, which Slow Mode do you mean? Anyway, after reading about on P6x58d and alikes, i found out that it does not use FSB anymore, the Quick Patch Interconnect (QPI) has replaced it...
So maybe it cannot show proper speeds now.

#188
Ended Zone

Ended Zone

    InsanelyMac Protégé

  • Members
  • Pip
  • 16 posts
  • Gender:Male
7,20GHZ is my QPI after the OC
otherwise is 4,8-6,4GHz

I am trying to make my PS2 BeyBoard Work....
which kext to use!!!!!

#189
knobsi

knobsi

    InsanelyMac Protégé

  • Members
  • PipPip
  • 58 posts
nice to hear, that you ave all runing up fine !!
but what about the sleep & wake up functions ?
are both also running?

cheers....

#190
Ended Zone

Ended Zone

    InsanelyMac Protégé

  • Members
  • Pip
  • 16 posts
  • Gender:Male
Sleep - NO!!! Any idea how to fix it... nah that I use it, but still :)

Audio is working NOW although is showing pritty different Audio Output and just Front Headphones... no BACK?!!?!?! Still back is working on LOWER levels!!!

I;ve tried ##### for PS2 Keyboard - NO! Where to get a proper kext for the keyboard?!

#191
morgandeno

morgandeno

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 2 posts
This walk through looks amazing. I've been trying to get Hackintosh going on this motherboard and have had no success. Can't wait to try this out.

One question though. Is it just me or is the Boot 132 file missing from the first post? I see the Post install attachment. Maybe I'm going crazy. If someone could point to where I'm failing to see this file it would be greatly appreciated.

Thanks

#192
vidiot2010

vidiot2010

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts
Hi. Anyone have success updating to 10.6.5 on this board?

Thanks

#193
morgandeno

morgandeno

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 2 posts

This walk through looks amazing. I've been trying to get Hackintosh going on this motherboard and have had no success. Can't wait to try this out.

One question though. Is it just me or is the Boot 132 file missing from the first post? I see the Post install attachment. Maybe I'm going crazy. If someone could point to where I'm failing to see this file it would be greatly appreciated.

Thanks


Please ignore this question. I knew I was going crazy. I found it in the zip file. Derp ;)

#194
Tona102

Tona102

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

Hi. Anyone have success updating to 10.6.5 on this board?

Thanks


It updates without a problem online to 10.6.5, here:
Attached File  Screen_shot_2010_11_20_at_1.03.23_PM.png   29.05KB   13 downloads

#195
CoriolisSTORM

CoriolisSTORM

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 6 posts
I must be the most clueless of users here, I ran the Chameleon installer from the first post, it ran fine and whatnot, but I still have to boot with the Boot132 CD. And since Chameleon isn't working, nothing with my graphics cards are either (yet...) I've even tried manually installing Chameleon to the drive, but no dice. (after following the instructions on the Chameleon site) and, Chameleon 2.0 RC5's actual installer just exits with an error, it says to contact the software author...

#196
agentemo1

agentemo1

    InsanelyMac Protégé

  • Members
  • Pip
  • 9 posts

First of all, I have to thank to author of this guide for helping me build my own osx machine... Built in in two days, if i had initially installed nvidia card instead of ati it would be just a couple of hours... Ok, nevermind that! The point is, everything works, except audio is the same for me as with Ended Zone, only back ports (2).

BTW, how come that my FSB shows only 533 MHZ, (also in geekbench) Ended Zone's machine shows 7,20 GHZ, Is there a setting i've missed?

Thanks for any help!


Toni

Oh yes...
The specs:

Core i7 950 @ 3.07Ghz
6.00 GB 1603 Mhz DDR3 ram



Having the same issue....

#197
scotty91

scotty91

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
Great guide, thank you!

I've got my system working (nearly)perfectly (Specs: P6X58D-E, core i7 930, 6GB RAM, GTX460) running 10.6.5.
Sleep works, it geekbenches at 10k+, I couldn't be happer!

But! After using it for an hour to 2 hours, it will randomly hang. It doesn't matter what i'm doing, but it will just completely freeze up. The only way to fix it is by powering off and then it will work again (perfectly) for another 1-2hours before it hangs again..

Anyone got any ideas?
Cheers.

#198
Ampage

Ampage

    InsanelyMac Protégé

  • Members
  • Pip
  • 11 posts

Great guide, thank you!

I've got my system working (nearly)perfectly (Specs: P6X58D-E, core i7 930, 6GB RAM, GTX460) running 10.6.5.
Sleep works, it geekbenches at 10k+, I couldn't be happer!

But! After using it for an hour to 2 hours, it will randomly hang. It doesn't matter what i'm doing, but it will just completely freeze up. The only way to fix it is by powering off and then it will work again (perfectly) for another 1-2hours before it hangs again..

Anyone got any ideas?
Cheers.


Have you seen this problem in windows/linux? Are you running in 64bit mode or 32bit? I've got the same CPU and mother board and don't have this issue. I run mine in 32bit mode though because of my ATI graphics card, however theres some new drivers for that that might enable me to use it. Going to test that tonight I think.

All your motherboard settings match the ones given in the guide? Also, are you using compatible RAM with the motherboard? - This one got me a while ago. It caused all sorts of havoc.

#199
knobsi

knobsi

    InsanelyMac Protégé

  • Members
  • PipPip
  • 58 posts

Great guide, thank you!

I've got my system working (nearly)perfectly (Specs: P6X58D-E, core i7 930, 6GB RAM, GTX460) running 10.6.5.
Sleep works, it geekbenches at 10k+, I couldn't be happer!

But! After using it for an hour to 2 hours, it will randomly hang. It doesn't matter what i'm doing, but it will just completely freeze up. The only way to fix it is by powering off and then it will work again (perfectly) for another 1-2hours before it hangs again..

Anyone got any ideas?
Cheers.



yes mate, unsupported ram could be the reason... check it !!

btw, you you´ve got managed to get your rig to sleep?

cheers, knobsi

#200
scotty91

scotty91

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts

Have you seen this problem in windows/linux? Are you running in 64bit mode or 32bit? I've got the same CPU and mother board and don't have this issue. I run mine in 32bit mode though because of my ATI graphics card, however theres some new drivers for that that might enable me to use it. Going to test that tonight I think.

All your motherboard settings match the ones given in the guide? Also, are you using compatible RAM with the motherboard? - This one got me a while ago. It caused all sorts of havoc.

As far as I know it should be compatible, I bought the motherboard, ram and cpu as a bundle from overclockers.co.uk. (This is the RAM i'm using: http://www.overclock....odid=MY-205-CS )
It runs 100% stable in windows overclocked at 4ghz. (I've removed the overclock to see if that was a problem in osx, but it still does it.) Yeah double checked the bios settings a couple of times so don't think its that. Running 32bit mode.


yes mate, unsupported ram could be the reason... check it !!

btw, you you´ve got managed to get your rig to sleep?

cheers, knobsi


I'll check, cheers. I have a feeling it could be to do with the graphics drivers as some people in the nvidia fermi thread seem to be having the same issues.
Yeah for sleep I installed a sleep enabler kext for 10.6.5, from this thread: http://www.insanelym...howtopic=196466

Cheers





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy