Jump to content

[Aiuto] Problema mac, non riconosce l' hardware e la risoluzione


Fra_gt
 Share

151 posts in this topic

Recommended Posts

  • 3 weeks later...

Le ATI 5xx0 vengono riconosciute dalla 10.6.4 in poi, quindi se non hai ancora aggiornato, aggiorna!

Una volta che hai aggiornato, dal blog di netkas, scarica l'aty_init.kext e i driver e installali con Kext Helper.

Fatto questo assicurati di non avere nel com.apple.Boot.plist il Graphics Enabler e di bootare in modalità 32bit (se usi il sistema a 64bit devi aggiungere una stringa al c.a.B.p nel kernel flag; c'è una F.A.Q. nella sezione apposita che spiega come fare).

Avendo tu una ATI 5770 "5770 works, but need both dvi to be connected to display.".

Link to comment
Share on other sites

Aggiornamento riuscito!!!

adesso? puoi spiegarmi dettagliatamente ciò che devo fare per favore?

premetto che il file com.boot.apple.plist è modificato per la risoluzione e ho modificato anche con lizard e chameleon..

ho graphics enabler Yes e graphics mode 1680*1050*32, installando i drive va a posto anche la risoluzione?

Link to comment
Share on other sites

Qualche altro chiarimento:

scarica l'aty_init.kext e i driver

Quali altri driver?

assicurati di non avere nel com.apple.Boot.plist il Graphics Enabler

Ce l' ho, e adesso? gli cancello la stringa? graphics mode lo lascio?

"5770 works, but need both dvi to be connected to display.".

Cioè? serve una presa dvi? io ho la presa dvi, ma con un convertitore dvi-vga, devo fare qualcosa?

Link to comment
Share on other sites

Provato:

scarico e installato i .kext

cancellato graphics enabler e graphics mode

controllato, il 32-bit era già di default

riavviato

carica, ma non visualizza niente sullo schermo e il monitor si disattiva, credo che non riceve nessun segnale...

come faccio ora?

ho il dual boot con 7, c'è qualche programma per visualizzare la partizione mac e modificargli i file da windows?

Link to comment
Share on other sites

Alcuni dei commenti presi dal sito di netkas:

 

1. "It’s working with sapphire 5770 http://img3.imageshack.us/img3/6901/screen...at405.png"

2. "i just saw Eugen got his 5770 working

can Eugen tell me how did you install those files into where?

i install them into S/L/E ,no lucky

when apple booting logo shoud be, i got a fullspeed GPU Fan and then black screen"

3. "I justt installed all te kexts with kext helper then i rebooted and everything worked fine."

4. "Panic with 5770 (68B8:1002)

http://leader86.it/appoggio/scr001.JPG"

5. "Thx netkas :) XFX HD 5770 1 GB DDR5 ram working here. just need a dvi2vga dongle on the second dvi port. heres a pic of opengl viewer http://img818.imageshack.us/img818/923/scr...100704at454.png

opencl test

…………………………………………………..

……………… OpenCL Bench V 0.25 by mitch ………..

…… C2D 3GHz = 12 sec vs Nvidia 9600GT = 0,93 sec ……

… time results are not comparable to older version! …..

…………………………………………………..

Number of OpenCL devices found: 2

OpenCL Device # 0 = ATI Radeon HD 5770

Device 0 is an: GPU with max. 725 MHz and 10 units/cores

Now computing – please be patient….

time used: 0.641 seconds

OpenCL Device # 1 = Intel® Core i7 CPU 920 @ 2.67GHz

Device 1 is an: CPU with max. 2704 MHz and 8 units/cores

Now computing – please be patient….

time used: 2.826 seconds

Now checking if results are valid – please be patient….

:) Validate test passed – GPU results=CPU results :)

So the 5770 is underclocked by 125 MHz but no worries :)"

6. "I have a 5770 and it works when I connect both DVI ports to same monitor (one port to the VGA port)"

7. "Success!!!

I’ve changed the framebuffer settings to Vervet, and EVERYTHING is working perfectly (ASUS EAH5770)! After reboot OSX recognized my LCD TV instantly, and set up dual display automatically… I can change resolutions now without a problem, and I don’t even have to connect screens to both DVI ports anymore!

Thanks again, and keep up the good work!"

.......

Link to comment
Share on other sites

 Share

×
×
  • Create New...