Jump to content

Tuto Snow Leopard Retail / Lion sur P5Q SE 2 [Updated rev 1.06]

- - - - -

  • Please log in to reply
67 replies to this topic

#21
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
All of everything is explained! Many people on this forum and other forum friends managed to install it without any worries ....

Synesthesia, for the sleep using a USB keyboard to test if this case just not there ... It is possible that your graphics card raises concerns ... this System is optimized for 64bit, 32bit version was not tested for myself since I do not see the point of remaining on the 32bits while 64bit works perfectly:)

EDIT : New bootCD : http://www.sendspace.com/file/9lgazi

Synesthesia : It's the PS2 kexts you installed that prevents the sleep I think!

#22
Synaesthesia

Synaesthesia

    InsanelyMacaholic

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 3,168 posts
  • Gender:Male
  • Location:South Africa

Yes, I'm having problems with the boot disk non beta first. The disk does not boot just gives a ton of errors, then I moved to the beta which works great but it will never boot from hard disk. I keep getting the IOAPIC error at the start of boot up. Using the 0801 bios file also Q6600 2.4 old chip.

I thought this would be the perfect hack!

His tut is great but it just doesn't translate to my install :-(


snakeman

Which technique are you using to install? Are you using a DSDT.aml file? To be honest I didn't even boot from the disk, I did everything from an 8gb Flash Disk. I didn't use retail either, I used Hazard 10.6.2, which I know is herecy amongst some people but worked fine.

All you need are a few kexts, a DSDT and the chameleon, all supplied in the pack and any type of Snow Leopard works.

@G0t13R thanks I'll try it again with USB, my uncle borrowed my USB keyboard I'll just get it back again :)

#23
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
Thanks for the new Boot disk I will try again to today. Will report back soon :)


snakeman

#24
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
This tuto was tested with only DVD "Retail" (DVD, dmg retaured to flashdisk or HDD partition) no other distribution....

Snakeman i cross my fingers for you :)

#25
Synaesthesia

Synaesthesia

    InsanelyMacaholic

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 3,168 posts
  • Gender:Male
  • Location:South Africa
I don't have sleep no matter what. I blame my nVidia card! Will look around for a solution, but I don't mind too much.

#26
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
No luck guys very strange motherboard for me I really can't make it work!


Boot CD = no good for me
Installed using TonyMac guide still no sleep and aml doesn't work for me.

Using Q6600 or might purchase a Q8400



Maybe time for a new board. :-(





snakeman

#27
Raid13

Raid13

    Mac-On-PC.fr 

  • Members
  • PipPipPipPipPip
  • 299 posts
  • Gender:Male
  • Location:Orléans, France
Il claque ton tutoriel ;) Félicitations

#28
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...

Il claque ton tutoriel :) Félicitations


Merci !

snakeman use the dsdt without Speedstep number 4 the number 5 is obselete :)

I have tested my bootCD, it work ! :D


#29
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
I found something interesting a soon as I add any of the DSDT.aml files the machine freezes with IOAPIC error if remove them, I can boot from a bootcd and only then ;)

I have it booting now with no DSDT.aml file I will try to create a generic one now. I have orange icons in my Finder :)

OK, I have it working. Decided not to to go the DSDT.aml configuration. I have it working with Kexts located in the Extra Folder I'm sure I don't have speedstep working :) but at least my machine is up and working.

I will probably toy with creating my own DSDT as soon as I find a good How-to. Thanks everyone


Cheers :)
snakeman

#30
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
I don't understand ! The dsdt.aml works with everyone and you no ! ;) Use DSDT Patcher GUI and post you file :(

#31
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

I don't understand ! The dsdt.aml works with everyone and you no ! ;) Use DSDT Patcher GUI and post you file ;)



I had to force compile it with HPET. Let me know if you need the error log too.




snakeman

Attached Files



#32
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
The mine is the same with the same first error ! without correction ! try with the mine and take a screenshot where you bug !

The AHCI is enabled, the S3 mode in teh Bios?

#33
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
I have tried all 4 of them I get the same error ioapic then it freezes. From that point I have to boot from a distro or retail and use terminal to delete the DSDT.aml file. Then the machine boots just fine with the Kexts loaded in the E/E dir.

Yes I have all the selections configured in the Bios :)

Hmm I wonder if I could call the DSDT file from the command line so I could test easier?


Currently trying from the command line DSDT=/file.name! Thats not working for some reason :D

snakeman

#34
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
modify the file dsdt.aml which you have to generate if it functions and addition there my fix! But good I do not understand that you would be the only one for whom the file prevent starting !

#35
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
Yes very strange. Would my add on Firewire card cause it?

Yes good idea, only problem I do not yet have the skills to edit the file properly


snakeman

#36
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
withdraw for checked!

This is the dsdt you have send with the warnings corrected only :censored2:

Attached File  dsdt.aml_original_corrig__.zip   13.36KB   19 downloads

#37
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

withdraw for checked!

This is the dsdt you have send with the warnings corrected only :censored2:

Attached File  dsdt.aml_original_corrig__.zip   13.36KB   19 downloads




Trying with it now!
That File Worked Fine!
I have a Q8400 CPU
Maybe thats causing it with your Modified DSDT.aml

Dunno just guessing

my proc below


Scope (_PR)
{
Processor (CPU0, 0x00, 0x00000410, 0x06) {}
Processor (CPU1, 0x01, 0x00000410, 0x06) {}
Processor (CPU2, 0x02, 0x00000410, 0x06) {}
Processor (CPU3, 0x03, 0x00000410, 0x06) {}
}

Scope (_PR.CPU0)
{
Method (_PSS, 0, NotSerialized)
{
Return (Package (0x03)
{
Package (0x06) { 2664, Zero, 0x10, 0x10, 0x0825, Zero },
Package (0x06) { 2331, Zero, 0x10, 0x10, 0x071E, One },
Package (0x06) { 1998, Zero, 0x10, 0x10, 0x0616, 0x02 }
})
}

Method (_PSD, 0, NotSerialized)
{
Return (Package (0x05)
{
0x05,
Zero,
Zero,
0xFC,
0x04
})
}

Method (_CST, 0, NotSerialized)
{
Return (Package (0x02)
{
One,
Package (0x04)
{
ResourceTemplate ()
{
Register (FFixedHW,
0x01, // Bit Width
0x02, // Bit Offset
0x0000000000000000, // Address
0x01, // Access Size
)
},

One,
0x9D,
0x03E8
}
})
}
}

Scope (_PR.CPU1)
{
Method (_PSS, 0, NotSerialized)
{
Return (^^CPU0._PSS ())
}

Method (_PSD, 0, NotSerialized)
{
Return (^^CPU0._PSD ())
}

Method (_CST, 0, NotSerialized)
{
Return (Package (0x04)
{
0x03,
Package (0x04)
{
ResourceTemplate ()
{
Register (FFixedHW,
0x01, // Bit Width
0x02, // Bit Offset
0x0000000000000000, // Address
,)
},

One,
Zero,
0x03E8
},

Package (0x04)
{
ResourceTemplate ()
{
Register (FFixedHW,
0x08, // Bit Width
0x00, // Bit Offset
0x0000000000000414, // Address
,)
},

0x02,
One,
0x01F4
},

Package (0x04)
{
ResourceTemplate ()
{
Register (FFixedHW,
0x08, // Bit Width
0x00, // Bit Offset
0x0000000000000415, // Address
,)
},

0x03,
0x55,
0xFA
}
})
}
}

Scope (_PR.CPU2)
{
Method (_PSS, 0, NotSerialized)
{
Return (^^CPU0._PSS ())
}

Method (_PSD, 0, NotSerialized)
{
Return (^^CPU0._PSD ())
}

Method (_CST, 0, NotSerialized)
{
Return (^^CPU1._CST ())
}
}

Scope (_PR.CPU3)
{
Method (_PSS, 0, NotSerialized)
{
Return (^^CPU0._PSS ())
}

Method (_PSD, 0, NotSerialized)
{
Return (^^CPU0._PSD ())
}

Method (_CST, 0, NotSerialized)
{
Return (^^CPU1._CST ())
}
}


snakeman

#38
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
It works cool ! But with that which I rectified previously ??? It's normally because the "alias" in CPU section was remove for the core 1 and 2 not 3 et 4 -_-

EDIT : try to use MSR tools in 32bits mode for know if your speedstep is correctly enabled (no NullCPUPowerManagement in Extra so .... it work normally ! )

make me a summary of which functions or does not function please

#39
snakeman

snakeman

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
With the last fix only 2 cpus work? I am still using Kexts in the /Extra folder. I will remove them and keep trying to see what is working and not working. Are there any other fixes in the last DSDT.aml file?



snakeman

#40
G0t!3r

G0t!3r

    Asus'er !

  • Members
  • PipPipPipPip
  • 217 posts
  • Gender:Male
  • Location:Abbeville, France
  • Interests:ReefTank, travels...
No in dsdt i have upload, 4 core works :whistle: In Extra you must have "only" SuperVIAATA.kext ;)





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy