Snnoooowwyyy Posted January 17, 2010 Share Posted January 17, 2010 Hello Guys... 1) I am having a "Orchid Bluetooth Dongle"...But it doesnt seems to have native support with snow leopard.. How to make it work? Hmm..The Bluetooth Is Getting Detected..I Had To Boot Into Mac W/ The Bluetooth Already Plugged In..! 2) I was using 32 bit since I installed snow leopard.. n then NTFS 3G and Paragon NTFS both were working fine..But now when I am booting into 64 bit, neither NTFS 3G works not Paragon.. Paragon only makes the NTFS drives read only and NTFS 3G cant mount them...What to do? NTFS 3G W/ MacFuse 64 Bit Works Fine..! 3) When I click on sleep, the computer goes to sleep but doesnt wakes up.. I tried installing SleepEnabler kext for 10.6.2 but it isnt working then also..Help me.. 4) I installed VoodooHDA kext + Prefpane.. I also added the voodoohdahelper file to the login items.. But it shows the terminal everytime I boot up..How to disable it from coming up everytime? I used a fix in which an app is to be copied to utilities but it didnt work.. I Checked Today That The PrefPane Wasnt Working Fine... So, I Uninstalled It... 5) My all the drives are coming orange in colour..I dont think it is normal..Is it? Link to comment Share on other sites More sharing options...
L14M333 Posted January 17, 2010 Share Posted January 17, 2010 Hello Guys...1) I am having a "Orchid Bluetooth Dongle"...But it doesnt seems to have native support with snow leopard.. How to make it work? 2) I was using 32 bit since I installed snow leopard.. n then NTFS 3G and Paragon NTFS both were working fine..But now when I am booting into 64 bit, neither NTFS 3G works not Paragon.. Paragon only makes the NTFS drives read only and NTFS 3G cant mount them...What to do? 3) When I click on sleep, the computer goes to sleep but doesnt wakes up.. I tried installing SleepEnabler kext for 10.6.2 but it isnt working then also..Help me.. 4) I installed VoodooHDA kext + Prefpane.. I also added the voodoohdahelper file to the login items.. But it shows the terminal everytime I boot up..How to disable it from coming up everytime? I used a fix in which an app is to be copied to utilities but it didnt work.. 5) My all the drives are coming orange in colour..I dont think it is normal..Is it? hello. 1. Your probably not gona have any luck with the dongle, and there cheap enough, did it work before you upgraded to SL if so i might be able to get an old hackintosh out whats running 10.5.8 and have a look for some bluetooth .kexts for you if it didn't i use to have a bluetooth dongle what worked... this was it: http://www.comet.co.uk/shopcomet/product/3...OTH-USB-ADAPTOR very cheap and did the job on 10.5.6 and thats all i tried it on and now i've lost it 2. sorry i don't think i can help here 3. urm i believe that they have some new kexts for sleep problems give this one a try... SleepEnabler.kext_10.6.2.zip use kext helper (google it) to install it and (yn) it should work. 4. sorry, cant help 5. What do you mean by orange colour? asin the usb logo? or something else. Hope all that can help. Liam Link to comment Share on other sites More sharing options...
audit13 Posted January 17, 2010 Share Posted January 17, 2010 2. You need a 64-bit version of MacFuse. MacFuse that comes with NTFS-3g has the 32-bit version. http://mac.softpedia.com/get/System-Utilities/MacFUSE.shtml 5. This is happening because the drives are showing up a removable devices. The devices will function normally. Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 18, 2010 Author Share Posted January 18, 2010 hello. 1. Your probably not gona have any luck with the dongle, and there cheap enough, did it work before you upgraded to SL if so i might be able to get an old hackintosh out whats running 10.5.8 and have a look for some bluetooth .kexts for you if it didn't i use to have a bluetooth dongle what worked... this was it: http://www.comet.co.uk/shopcomet/product/3...OTH-USB-ADAPTOR very cheap and did the job on 10.5.6 and thats all i tried it on and now i've lost it 2. sorry i don't think i can help here 3. urm i believe that they have some new kexts for sleep problems give this one a try... SleepEnabler.kext_10.6.2.zip use kext helper (google it) to install it and (yn) it should work. 4. sorry, cant help 5. What do you mean by orange colour? asin the usb logo? or something else. Hope all that can help. Liam Thnxx..But I have already tried that SleepEnabler..Didnt work... 2. You need a 64-bit version of MacFuse. MacFuse that comes with NTFS-3g has the 32-bit version. http://mac.softpedia.com/get/System-Utilities/MacFUSE.shtml 5. This is happening because the drives are showing up a removable devices. The devices will function normally. OK..Thnxx..Will try the macfuse you gave..n Isnt there any fix for the orange drives? Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 18, 2010 Author Share Posted January 18, 2010 2. You need a 64-bit version of MacFuse. MacFuse that comes with NTFS-3g has the 32-bit version. http://mac.softpedia.com/get/System-Utilities/MacFUSE.shtml 5. This is happening because the drives are showing up a removable devices. The devices will function normally. This MacFuse also didnt work..Then I searched the net and got an unofficial release v.2.1.7 Beta..That worked fine.. Should I use it? Is that version reliable? Link to comment Share on other sites More sharing options...
Z0ID Posted January 18, 2010 Share Posted January 18, 2010 To fix point 5 (just cosmetic) download http://osx86.sojugarden.com/files/Extensio...jector.kext.zip mfg betzo Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 19, 2010 Author Share Posted January 19, 2010 To fix point 5 (just cosmetic) download http://osx86.sojugarden.com/files/Extensio...jector.kext.zip mfg betzo It didnt work.. BTW I am not using AHCI mode.. Link to comment Share on other sites More sharing options...
audit13 Posted January 19, 2010 Share Posted January 19, 2010 The beta of MacFuse worked for my friend. You're using the mobo in your signature? If you are, you can't use ahci mode because your chipset doesn't support it. Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 20, 2010 Author Share Posted January 20, 2010 The beta of MacFuse worked for my friend. You're using the mobo in your signature? If you are, you can't use ahci mode because your chipset doesn't support it. So, 2.1.7 MacFuse is fine? n Yeah I am using the same mobo as in my signature.. There isnt any way to enable AHCI? I can enable it from my BIOS n then the windows runs fine..But then snow leopard give a KP... Link to comment Share on other sites More sharing options...
audit13 Posted January 20, 2010 Share Posted January 20, 2010 So, 2.1.7 MacFuse is fine?n Yeah I am using the same mobo as in my signature.. There isnt any way to enable AHCI? I can enable it from my BIOS n then the windows runs fine..But then snow leopard give a KP... Yes, 2.17 is fine. You can enable ahci in bios? Are you sure it's not for the Jmicron controller? I set SL up for a friend who has the same board and ahci applies only to the Jmicron since ich8 doesn't support ahci. Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 20, 2010 Author Share Posted January 20, 2010 Yes, 2.17 is fine. You can enable ahci in bios? Are you sure it's not for the Jmicron controller? I set SL up for a friend who has the same board and ahci applies only to the Jmicron since ich8 doesn't support ahci. Oh srry..Its for the Jmicron controller only.. Link to comment Share on other sites More sharing options...
MBerke Posted January 20, 2010 Share Posted January 20, 2010 Someone please HELP ME! I'm trying to install hackintosh on my PC, but I can't... The best (so far) was 10.6.2., which was nearly OK, I thought it's starting, but stopped. I have black screen, and a mouse icon, which is working, but that's all... I tryed -x, -v, -s, -f, everything, but same results. For 2 weeks, I cannot install an OSX. Motherboard: Gigabyte EP43-S3L Processor: Intel Pentium E5200 Dual-core @ 2,5 GHz Graphic: ATI Radeon HD 3870 Memory: 4*2 GB Please, please, please! I would like to use MAC OSX. Thanks for your help forward! Link to comment Share on other sites More sharing options...
Z0ID Posted January 20, 2010 Share Posted January 20, 2010 I have a Asus P5B-E, after a Bios update AHCI Mode was there... so may u have to check out if theres a new version of your BIOS... If theres any body who needs Drivers for P5B-XYZ pm me. Everything is fine except the Attansic L1 Gigabit adapt0r. My Sata driver are running fine too even if I disable AHCI in bios and activating the compatible mode.. ich8 deosnt support AHCI who said that, must be wrong cause I am running AHCI on my ICH Chipset I can post a photo to proof... g00d luck Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 20, 2010 Author Share Posted January 20, 2010 I have a Asus P5B-E, after a Bios update AHCI Mode was there... so may u have to check out if theres a new version of your BIOS... If theres any body who needs Drivers for P5B-XYZ pm me. Everything is fine except the Attansic L1 Gigabit adapt0r. My Sata driver are running fine too even if I disable AHCI in bios and activating the compatible mode.. ich8 deosnt support AHCI who said that, must be wrong cause I am running AHCI on my ICH Chipset I can post a photo to proof... g00d luck I have the latest BIOS ..but there is no such option for me ... Link to comment Share on other sites More sharing options...
audit13 Posted January 20, 2010 Share Posted January 20, 2010 I have a Asus P5B-E, after a Bios update AHCI Mode was there... so may u have to check out if theres a new version of your BIOS... If theres any body who needs Drivers for P5B-XYZ pm me. Everything is fine except the Attansic L1 Gigabit adapt0r. My Sata driver are running fine too even if I disable AHCI in bios and activating the compatible mode.. ich8 deosnt support AHCI who said that, must be wrong cause I am running AHCI on my ICH Chipset I can post a photo to proof... g00d luck Your p5b-e uses ich8r which supports ahci while the p5b-vm uses the ich8 (no "r") and no ahci. Someone please HELP ME!I'm trying to install hackintosh on my PC, but I can't... The best (so far) was 10.6.2., which was nearly OK, I thought it's starting, but stopped. I have black screen, and a mouse icon, which is working, but that's all... I tryed -x, -v, -s, -f, everything, but same results. For 2 weeks, I cannot install an OSX. Motherboard: Gigabyte EP43-S3L Processor: Intel Pentium E5200 Dual-core @ 2,5 GHz Graphic: ATI Radeon HD 3870 Memory: 4*2 GB Please, please, please! I would like to use MAC OSX. Thanks for your help forward! Do you have an nVidia card you could try instead? Link to comment Share on other sites More sharing options...
MBerke Posted January 20, 2010 Share Posted January 20, 2010 Do you have an nVidia card you could try instead? Nope... :-( Unfortunately that's all I have... Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 21, 2010 Author Share Posted January 21, 2010 Your p5b-e uses ich8r which supports ahci while the p5b-vm uses the ich8 (no "r") and no ahci. Oh... Thats why... BTW I am not much concerened with AHCI.. Help me with my other problems.. Link to comment Share on other sites More sharing options...
audit13 Posted January 21, 2010 Share Posted January 21, 2010 Oh... Thats why... BTW I am not much concerened with AHCI.. Help me with my other problems.. Since your chipset doesn't support ahci,that's why you have the orange hd icons. Link to comment Share on other sites More sharing options...
Z0ID Posted January 22, 2010 Share Posted January 22, 2010 Heya, My only idea is MyHack`s http://osx86.sojugarden.com/files/Extensio...jector.kext.zip AHCI Port injector ;-) [Adds a device name to AHCI controllers that aren’t included in the stock KEXT (ICH9 and earlier ICH chipsets).] its the one from Scott aka conti...(thx alot) Try your luck with them. If it doesnt work try to edit the ids of the kext with the ID u get from lscpi Tools, last chanceis to apply a nifty DSDT Patch but i am not so familiar with DSDT Sata patches ... g000d luck Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 24, 2010 Author Share Posted January 24, 2010 Heya, My only idea is MyHack`s http://osx86.sojugarden.com/files/Extensio...jector.kext.zip AHCI Port injector ;-) [Adds a device name to AHCI controllers that aren’t included in the stock KEXT (ICH9 and earlier ICH chipsets).] its the one from Scott aka conti...(thx alot) Try your luck with them. If it doesnt work try to edit the ids of the kext with the ID u get from lscpi Tools, last chanceis to apply a nifty DSDT Patch but i am not so familiar with DSDT Sata patches ... g000d luck Okk..Thnx..Gonna try that kext.. BTW Plz help me with my other problems too... Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 27, 2010 Author Share Posted January 27, 2010 Heya, My only idea is MyHack`s http://osx86.sojugarden.com/files/Extensio...jector.kext.zip AHCI Port injector ;-) [Adds a device name to AHCI controllers that aren’t included in the stock KEXT (ICH9 and earlier ICH chipsets).] its the one from Scott aka conti...(thx alot) Try your luck with them. If it doesnt work try to edit the ids of the kext with the ID u get from lscpi Tools, last chanceis to apply a nifty DSDT Patch but i am not so familiar with DSDT Sata patches ... g000d luck AHCI Port Injector didnt work.. Can somebody help me with DSDT Sata patches..? Link to comment Share on other sites More sharing options...
Silencers Posted January 28, 2010 Share Posted January 28, 2010 3) When I click on sleep, the computer goes to sleep but doesnt wakes up.. I tried installing SleepEnabler kext for 10.6.2 but it isnt working then also..Help me.. 4) I installed VoodooHDA kext + Prefpane.. I also added the voodoohdahelper file to the login items.. But it shows the terminal everytime I boot up..How to disable it from coming up everytime? I used a fix in which an app is to be copied to utilities but it didnt work.. 3) I have exactly the same problem, and it's not about SleepEnabler. It enables you to go to sleep, but it's not related to waking up. I've tried almost everything with no luck, so I hope someone will help us. 4) Try the latest VoodooHDA (0.2.52) from here - scroll to the bottom of the first post for links. It works just fine for me. Also, make sure you run pfix console tool after you change any kexts. You can get it here. Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 28, 2010 Author Share Posted January 28, 2010 3) I have exactly the same problem, and it's not about SleepEnabler. It enables you to go to sleep, but it's not related to waking up. I've tried almost everything with no luck, so I hope someone will help us. 4) Try the latest VoodooHDA (0.2.52) from here - scroll to the bottom of the first post for links. It works just fine for me. Also, make sure you run pfix console tool after you change any kexts. You can get it here. Hmm..I hope that we'll get a solution for the sleep problem... BTW Thanx for the update of VoodooHDA... Link to comment Share on other sites More sharing options...
Snnoooowwyyy Posted January 30, 2010 Author Share Posted January 30, 2010 Anyone? Link to comment Share on other sites More sharing options...
ridgeline Posted February 5, 2010 Share Posted February 5, 2010 I found a native way for read and write NTFS that was posted on another forum worked great for me simple line editing as SL originally had R/W priviledges check it out for alternative works great in both 32 and 64 bit modes. http://forums.macrumors.com/showthread.php?t=785376 Link to comment Share on other sites More sharing options...
Recommended Posts