shinnohn Posted January 8, 2010 Share Posted January 8, 2010 So, I have an HP Mini 1000. I followed this (http://www.myhpmini.com/forum/viewtopic.php?f=17&t=37) guide to install iDeneb 1.3 and this (http://www.myhpmini.com/forum/viewtopic.php?f=43&t=1445) guide to get it onto a USB via ddmac. (I think I was using the darwin bootloader) Everything went well. A few weeks in, I tried upgrading to 10.5.8 using the iDeneb Combo Upgrade Kit. This went badly and after much fixing I got to a point where it worked, but not very well. I decided to reinstall, so I got the USB made with ddmac (Windows) and booted from it. It ended up just going to my main hard drive. So I went into Windows and reformatted the Mac partition. I rebooted and then I got an error message: "Remove disks or other media. Press any key to restart." I press Enter. "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key" I press Enter and it goes back to the first message. HELP? (I can boot into Windows and I don't have an External CD/DVD drive.) EDIT: Sorry, I got it working. I needed to reset the Windows Partition to Active. Link to comment Share on other sites More sharing options...
Recommended Posts