Jump to content

Gianda Slim N10 (OSx86)?


_smirk
 Share

20 posts in this topic

Recommended Posts

Hallo ich habe den klenen Nettop GIADA SLIM N10 bekommen auf welchem ich gerne 10.5 bzw 10.6 (sogar lieber) laufen lassen würde.

Leider verblieb das ganze bei mir bis jetzt ohne erfolg, sei es mit SnowOSX3.6 oder iDeneb_v1.3_10.5.5 jedesmal bleibt er mir beim Booten stehen (dann wo der Apfel auf weißem Hintergrund kommt bleibt das Rad aus und es passiert einfach gar nix mehr).

Hat vielleicht jemand einen Tipp wie ich weiter komme :thumbsup_anim: oder wodran das liegen könnte?

 

Zum GIADA SLIM N10: Chipset: Nvidia ION, CPU Intel Dualcore Atom N333, GPU Nvidia 9400M

 

vielen Dank

Link to comment
Share on other sites

Hi erstmal danke das du mir hilfst hier der Text den er schreibt,

 

USBF: 3.329 AppleUSBEHC (0X3668800): :UIMInitialize - could not get chip to halt within 100 ms

USBF: 3.331 AppleUSBEHC (0X3668800): :UIMInitialize - Error occurred (0xe00002be)

USBF: 3.417 EHCI controller unable to take control from BIOS

USBF: 3.418 AppleUSBEHC (0X3668800): :unable to obtain owership : 0ex00002be

USBF: 3.419 AppleUSBEHC (0X3668800): :UIMInitialize - Error occurred (0x00002be)

USBF: 3.420 AppleUSBEHC unable to Initialize UIM

USBF: 3.471 AppleUSBEHC (0X3668800): :UIMInitialize - could not get chip to halt within 100 ms

USBF: 3.477 AppleUSBEHC unable to Initialize UIM

USBF: 3.344 AppleUSBEHC (0X3668800): :CheckSleepCapability - OHCI controller will be unloaded across sleep

USBF: 7.983 AppleUSBEHC (0X3668800): :CheckSleepCapability - OHCI controller will be unloaded across sleep

Still waiting for root device

Still waiting for root device

Still waiting for root device

.

.

.

 

 

Was meinst du mit In BIOS sowas wie USB2/EHCI kannst ausschalten?

Find ich leider nirgends den Punk

Link to comment
Share on other sites

Doch grade gefunden hab nun auf

 

OnChip S-ATA Comtroller (Enabled)

SATA Mode select (AHCI Mode)

Sata Hotplug (Disabled)

Chage the AHCI DID for Linux. (Disbaled)

 

 

 

unter AHCI Settings hab ich

 

AHCI Port 0 (Not Detected)

AHCI Port 1 (Not Detected)

AHCI Port 2 (Not Detected)

AHCI Port 3 (Hard Disk)

AHCI Port 4 (Not Detected)

AHCI Port 5 (Not Detected)

 

 

weiterhin mit eingelegter iDene1.3

 

USBF: 3.329 AppleUSBEHC (0X3668800): :UIMInitialize - could not get chip to halt within 100 ms

USBF: 3.331 AppleUSBEHC (0X3668800): :UIMInitialize - Error occurred (0xe00002be)

USBF: 3.417 EHCI controller unable to take control from BIOS

USBF: 3.418 AppleUSBEHC (0X3668800): :unable to obtain owership : 0ex00002be

USBF: 3.419 AppleUSBEHC (0X3668800): :UIMInitialize - Error occurred (0x00002be)

USBF: 3.420 AppleUSBEHC unable to Initialize UIM

USBF: 3.471 AppleUSBEHC (0X3668800): :UIMInitialize - could not get chip to halt within 100 ms

USBF: 3.477 AppleUSBEHC unable to Initialize UIM

USBF: 3.344 AppleUSBEHC (0X3668800): :CheckSleepCapability - OHCI controller will be unloaded across sleep

USBF: 7.983 AppleUSBEHC (0X3668800): :CheckSleepCapability - OHCI controller will be unloaded across sleep

Still waiting for root device

Still waiting for root device

Still waiting for root device

.

.

.

Link to comment
Share on other sites

es sind nur 2 USB

 

USB 1th 2.0 Controller (Disable)

USB 2th 2.0 Controller (Disable)

USB 2.0 Controller Mode geht nur HiSpeed und FullSpeed

 

Update:

 

nun tut sich was .....

http://twitpic.com/x6mej

 

Update:

Nun läd grade die iDeneb Oberfläche ...

Festplatte konnte nun auch Formatiert werden als Mac OS Extended

 

So nun komme ich wieder nicht weiter,

nun wo ich auf Customize gehe muss ich da wieder das hier machen?

 

Expand “fixes” and select: acpi, cpu, and remove firewire

Under “patches” expand chipset and select ichx fix

 

oder etwas anderes?

Link to comment
Share on other sites

so mal wieder n kleines Update:

 

Die Installation ist nun durch gelaufen, nun startet der Slim N10

 

 

 

1. Type “-s” and hit enter

2. Wait for the text skim by until it stops. Then type “/sbin/fsck –fy” and press enter

3. Once it says “File System was modified” type “/sbin/mount -uw /” with spaces

4. Next type in “passwd root”

5. Now type in whatever password you’d like, twice, pressing enter after each time.

6. The type “touch /var/db/.AppleSetupDone” being sure not to forget the . or Caps

7. Now type “reboot” and hit enter

 

ich drücke -s

er läd die Daten irgendwann kommt dann :

http://twitpic.com/x6t02

 

Nachdem ich dann /sbin/fsck –fy eingegeben hab kommt

http://twitpic.com/x6szg

 

nun gebe ich /sbin/mount -uw / ein aber es passiert nix, auf die Eingabe von passwd root

http://twitpic.com/x6t0e

 

 

leider hab ich wieder kein plan wodran das liegen kann und wäre über weitere hilfe sehr dankbar

Link to comment
Share on other sites

so mal wieder n kleines Update:

 

Die Installation ist nun durch gelaufen, nun startet der Slim N10

 

 

 

1. Type “-s” and hit enter

2. Wait for the text skim by until it stops. Then type “/sbin/fsck –fy” and press enter

3. Once it says “File System was modified” type “/sbin/mount -uw /” with spaces

4. Next type in “passwd root”

5. Now type in whatever password you’d like, twice, pressing enter after each time.

6. The type “touch /var/db/.AppleSetupDone” being sure not to forget the . or Caps

7. Now type “reboot” and hit enter

 

ich drücke -s

er läd die Daten irgendwann kommt dann :

http://twitpic.com/x6t02

 

Nachdem ich dann /sbin/fsck –fy eingegeben hab kommt

http://twitpic.com/x6szg

 

nun gebe ich /sbin/mount -uw / ein aber es passiert nix, auf die Eingabe von passwd root

http://twitpic.com/x6t0e

 

 

leider hab ich wieder kein plan wodran das liegen kann und wäre über weitere hilfe sehr dankbar

 

Wieso machst du es überhaupt?

Link to comment
Share on other sites

weil er nach der installation beim booten wo der Apfel auf dem grauweißen hintergrund ist ca 1h mit drehenden rad hing und ich das in diversen tutorials gefunden hab :huh:

ich glaub ich mach bald n anfrage wer mir das hp mini 110c und den nettop fertig macht bekommt €€ :)

Link to comment
Share on other sites

 Share

×
×
  • Create New...