Jump to content

Post those CPU Xbench OVER 100 results! Cinebench over 350? QE/CI only please! (LOL)


retroz
 Share

32 posts in this topic

Recommended Posts

Trying to find the fastest system out there,,,,with QE/CI (ala FCP and Logic Use (very FPU and CPU dependent) thus the QE/CI enabled users only...

 

 

Anyone get CPU over 100% not total score but CPU RESULTS over 100%?

 

If so, if not in sig, please elaborate on system setup.

 

Cinebench 350+??

 

I'll go first with my stock, then tomorrow, post the new setup (Asus maybe, with 20% increase, although I still think a overclocked D 930 at 3.6 yields a 18% increase only in FPU/CPU...

 

CINEBENCH 9.5

****************************************************

 

Tester : 1

 

Processor : D930 Stock

MHz : 3.0

Number of CPUs : 2

Operating System : 10.4.6

 

Graphics Card : GMA950

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 237 CB-CPU

Rendering (Multiple CPU): 415 CB-CPU

 

Multiprocessor Speedup: 1.75

 

Shading (CINEMA 4D) : 312 CB-GFX

Shading (OpenGL Software Lighting) : 1120 CB-GFX

Shading (OpenGL Hardware Lighting) : 544 CB-GFX :blink:

 

OpenGL Speedup: 3.59

 

****************************************************

 

CPU Test ONLY 63.02

GCD Loop 87.66 4.62 Mops/sec

Floating Point Basic 71.61 1.70 Gflop/sec

vecLib FFT 45.38 1.50 Gflop/sec

Floating Point Library 62.27 10.84 Mops/sec

 

 

Results 94.67 WITH THREAD AND MEMORY

System Info

Xbench Version 1.2

System Version 10.4.6 (8I1119)

Physical RAM 2048 MB

Model ADP2,1

Drive Type ST3300631A

CPU Test 63.68 (CPU OF COURSE STILL AT 63.6)

GCD Loop 91.21 4.81 Mops/sec

Floating Point Basic 71.10 1.69 Gflop/sec

vecLib FFT 45.50 1.50 Gflop/sec

Floating Point Library 63.25 11.01 Mops/sec

Thread Test 153.81

Computation 137.33 2.78 Mops/sec, 4 threads

Lock Contention 174.77 7.52 Mlocks/sec, 4 threads

Memory Test 105.45

System 95.93

Allocate 65.51 240.57 Kalloc/sec

Fill 129.40 6291.57 MB/sec

Copy 120.79 2494.91 MB/sec

Stream 117.07

Copy 112.38 2321.18 MB/sec

Scale 116.15 2399.70 MB/sec

Add 120.64 2569.84 MB/sec

Triad 119.46 2555.49 MB/sec

 

53.26 Xbench Pass 1 ATA 100 Full Score 60 hz LCD

67.94 Xbench Pass 2 ATA 100 " "60 hz LCD

59.38 Dbeam/2d disabled/enabled ATA 100 Pass 1 60 hz LCD

65.76 Dbeam/2d disabled/enabled ATA 100 Pass 2 60 hz LCD

 

73.16 Dbeam/2d disabled/enabled ATA 100 Pass 1 75hz Display LCD

72.81 Dbeam/2d disabled/enabled ATA 100 Pass 2 75hz LCD

 

Note the increased score with higher resolution setting of 75hz vs 60 hz.???

Link to comment
Share on other sites

man. you must delete your post.

you have only 94. :D

Xbench don't give objective appraisal.

 

my CPU test (pentium D805 - stock 2.66Ghz)

CPU Test 60.55

GCD Loop 81.42 4.29 Mops/sec

Floating Point Basic 68.52 1.63 Gflop/sec

vecLib FFT 45.50 1.50 Gflop/sec

Floating Point Library 58.12 10.12 Mops/sec

 

 

i don't trust what it's so near with yours D930 !!

and in total my config have over 90-91 points

with a half of your ram (1 GB) and with the slowest CPU.

 

 

also i have AMD 64 3200+ (Winchester core SSE2 ONLY !!!)

CPU Test 65.97

GCD Loop 103.50 5.46 Mops/sec

Floating Point Basic 82.95 1.97 Gflop/sec

vecLib FFT 40.76 1.34 Gflop/sec

Floating Point Library 69.56 12.11 Mops/sec

it's beat yours D930. hmmmmmmmm... maybe maybe.. but not sure...

Link to comment
Share on other sites

Here are my results.

 

Cinebench:

 

CINEBENCH 9.5

****************************************************

 

Tester : Tester

 

Processor : Pentium D 920

MHz : 2800

Number of CPUs : 2

Operating System : 10.4.6

 

Graphics Card : D945PSN

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 237 CB-CPU

Rendering (Multiple CPU): 441 CB-CPU

 

Multiprocessor Speedup: 1.86

 

Shading (CINEMA 4D) : 310 CB-GFX

Shading (OpenGL Software Lighting) : 1244 CB-GFX

Shading (OpenGL Hardware Lighting) : 2550 CB-GFX

 

OpenGL Speedup: 8.22

 

****************************************************

 

Xbench:

 

Results 110.99

System Info

Xbench Version 1.2

System Version 10.4.6 (8I1119)

Physical RAM 2048 MB

Model ADP2,1

Drive Type Maxtor 6V300F0

CPU Test 61.75

GCD Loop 85.27 4.49 Mops/sec

Floating Point Basic 72.02 1.71 Gflop/sec

vecLib FFT 44.30 1.46 Gflop/sec

Floating Point Library 60.29 10.50 Mops/sec

Thread Test 158.05

Computation 142.90 2.89 Mops/sec, 4 threads

Lock Contention 176.80 7.61 Mlocks/sec, 4 threads

Memory Test 111.55

System 92.24

Allocate 60.29 221.39 Kalloc/sec

Fill 126.03 6127.86 MB/sec

Copy 124.97 2581.14 MB/sec

Stream 141.09

Copy 135.30 2794.51 MB/sec

Scale 135.31 2795.45 MB/sec

Add 147.94 3151.49 MB/sec

Triad 146.84 3141.16 MB/sec

Quartz Graphics Test 107.27

Line 108.01 7.19 Klines/sec [50% alpha]

Rectangle 103.73 30.97 Krects/sec [50% alpha]

Circle 104.03 8.48 Kcircles/sec [50% alpha]

Bezier 100.84 2.54 Kbeziers/sec [50% alpha]

Text 122.24 7.65 Kchars/sec

OpenGL Graphics Test 118.60

Spinning Squares 118.60 150.45 frames/sec

User Interface Test 198.00

Elements 198.00 908.70 refresh/sec

Disk Test 113.89

Sequential 129.16

Uncached Write 139.16 85.44 MB/sec [4K blocks]

Uncached Write 137.42 77.75 MB/sec [256K blocks]

Uncached Read 107.38 31.42 MB/sec [4K blocks]

Uncached Read 139.04 69.88 MB/sec [256K blocks]

Random 101.84

Uncached Write 77.49 8.20 MB/sec [4K blocks]

Uncached Write 122.67 39.27 MB/sec [256K blocks]

Uncached Read 95.63 0.68 MB/sec [4K blocks]

Uncached Read 128.80 23.90 MB/sec [256K blocks]

Link to comment
Share on other sites

Not over 100 on cpu only but close.

 

CineBench here CINEBENCH 9.5

****************************************************

 

Tester :

 

Processor : AMD64

MHz : 2700

Number of CPUs : 1

Operating System : Mac OS 10.4.6

 

Graphics Card :

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 392 CB-CPU

Rendering (Multiple CPU): --- CB-CPU

 

 

Shading (CINEMA 4D) : 435 CB-GFX

Shading (OpenGL Software Lighting) : 1784 CB-GFX

Shading (OpenGL Hardware Lighting) : 3026 CB-GFX

 

OpenGL Speedup: 6.95

 

****************************************************

 

Xbench

 

Not running Disk Tests cause im using an old 40GB disk not my Sata one.

8 more to 100 cpu result :poster_oops:

 

Results 131.81

System Info

Xbench Version 1.2

System Version 10.4.6 (8I1119)

Physical RAM 1024 MB

Model ADP2,1

Drive Type ST340016A

CPU Test 91.98

GCD Loop 148.99 7.85 Mops/sec

Floating Point Basic 112.62 2.68 Gflop/sec

vecLib FFT 55.97 1.85 Gflop/sec

Floating Point Library 99.73 17.37 Mops/sec

Thread Test 94.58

Computation 67.68 1.37 Mops/sec, 4 threads

Lock Contention 156.97 6.75 Mlocks/sec, 4 threads

Memory Test 134.02

System 142.95

Allocate 200.48 736.22 Kalloc/sec

Fill 136.84 6653.60 MB/sec

Copy 115.06 2376.55 MB/sec

Stream 126.14

Copy 119.10 2460.00 MB/sec

Scale 119.51 2468.96 MB/sec

Add 133.06 2834.55 MB/sec

Triad 134.55 2878.40 MB/sec

Quartz Graphics Test 171.83

Line 123.54 8.23 Klines/sec [50% alpha]

Rectangle 166.06 49.58 Krects/sec [50% alpha]

Circle 155.66 12.69 Kcircles/sec [50% alpha]

Bezier 142.51 3.59 Kbeziers/sec [50% alpha]

Text 649.08 40.60 Kchars/sec

OpenGL Graphics Test 159.58

Spinning Squares 159.58 202.44 frames/sec

User Interface Test 220.92

Elements 220.92 1.01 Krefresh/sec

Link to comment
Share on other sites

Oh poopy doop. I should have been more specific, are you AMDers (I also have a AMD64 SSE2 only) using a ATIX1600?

 

In a nutshell, want to see RENDERING over 350 with QE/CI enabled.....AMD is fine, just want to know if those are working QE/CI.

 

Nice marks so far. If we can get into the 350 render mark, we getting close to quad G5, but not for 4 way render, but for one/two cpu render.

 

2nd thing is Xbench CPU score, sure the Xbench can be unreliable, but notice that the CPU mark (no memory, thread test) remains stable regardless. Thus looking for OVER 100 in CPU score in Xbenchy! :P

 

Peace

Link to comment
Share on other sites

Oh poopy doop. I should have been more specific, are you AMDers (I also have a AMD64 SSE2 only) using a ATIX1600?

 

Im using a ATI X1600 Pro 256MB DDR2, forgot to mention it above. About the render my score was 392, not bad for a 100€ A64 3200+ (overclocked of course).

Link to comment
Share on other sites

  • 2 weeks later...

Something odd with your setup, Retroz. My 830 shouldn't be faster I don't think:

 

Cinebench

CINEBENCH 9.5

****************************************************

 

Processor : PD-830

MHz : 3000

Number of CPUs : 2

Operating System : 10.4.7

 

Graphics Card : GMA950

Resolution : 1680x1050

Color Depth : 32

 

****************************************************

 

Rendering (Single CPU): 256 CB-CPU

Rendering (Multiple CPU): 474 CB-CPU

 

Multiprocessor Speedup: 1.85

 

Shading (CINEMA 4D) : 332 CB-GFX

Shading (OpenGL Software Lighting) : 1203 CB-GFX

Shading (OpenGL Hardware Lighting) : 596 CB-GFX

 

OpenGL Speedup: 3.63

 

****************************************************

XBench CPU

Results 69.30

System Info

Xbench Version 1.2

System Version 10.4.7 (8J2135)

Physical RAM 2048 MB

Model ADP2,1

Drive Type Maxtor 7L300S0

CPU Test 69.30

GCD Loop 91.95 4.85 Mops/sec

Floating Point Basic 79.03 1.88 Gflop/sec

vecLib FFT 52.02 1.72 Gflop/sec

Floating Point Library 66.79 11.63 Mops/sec

Gets 112 or 121 (forget which) on full xbench.

Link to comment
Share on other sites

  • 3 weeks later...

I also have a 2.66 GHz P4 processor, and I am curious why some of my numbers are much slower than the OP. Is it simply because of the 2GB of ram vs 1GB?

System Info

Xbench Version 1.2

System Version 10.4.7 (8J2135)

Physical RAM 1024 MB

Model ADP2,1

Drive Type HDT722516DLAT80

CPU Test 50.06

GCD Loop 96.91 5.11 Mops/sec

Floating Point Basic 56.84 1.35 Gflop/sec

vecLib FFT 27.71 914.11 Mflop/sec

Floating Point Library 62.91 10.95 Mops/sec

Thread Test 83.32

Computation 87.13 1.77 Mops/sec, 4 threads

Lock Contention 79.82 3.43 Mlocks/sec, 4 threads

Memory Test 78.38

System 64.85

Allocate 47.37 173.96 Kalloc/sec

Fill 84.13 4090.45 MB/sec

Copy 75.38 1556.99 MB/sec

Stream 99.05

Copy 93.91 1939.65 MB/sec

Scale 93.01 1921.57 MB/sec

Add 105.60 2249.51 MB/sec

Triad 105.13 2248.98 MB/sec

Link to comment
Share on other sites

  • 1 month later...

Here's mine. Core 2 Duo E6600 with DDR2-667 ram. Specs in my .sig.

 

Cinebench 9.5

Rendering (Multiple CPU): 730 CB-CPU

Shading (CINEMA 4D) : 487 CB-GFX

Shading (OpenGL Hardware Lighting) : 2523 CB-GFX

 

Xbench

CPU Test 119.55

GCD Loop 282.55 14.89 Mops/sec

Floating Point Basic 137.01 3.26 Gflop/sec

vecLib FFT 87.74 2.89 Gflop/sec

Floating Point Library 89.10 15.52 Mops/sec

Thread Test 240.63

Computation 220.21 4.46 Mops/sec, 4 threads

Lock Contention 265.22 11.41 Mlocks/sec, 4 threads

Memory Test 138.44

System 151.37

Allocate 122.98 451.61 Kalloc/sec

Fill 162.37 7894.79 MB/sec

Copy 180.88 3735.99 MB/sec

Stream 127.54

Copy 119.82 2474.88 MB/sec

Scale 124.21 2566.16 MB/sec

Add 134.43 2863.62 MB/sec

Triad 132.85 2842.07 MB/sec

 

Other benchmarks

Xbench: 152.19

Geekbench:234.1

Photoshop Bench Smart Blur:105.1

Power Fractal:8791.4

 

mir...

Link to comment
Share on other sites

  • 2 months later...

@miramar: Realtek 8111 GB PCIe works with R1000 driver on same mobo ...

 

CINEBENCH 9.5

****************************************************

 

Tester : Atmosfear

 

Processor : Core 2 Duo E6600

MHz : 2400

Number of CPUs : 2

Operating System : MacOS X 10.4.8

 

Graphics Card : X1900 XT 256MB

Resolution : 1920x1200

Color Depth : 32bpp

 

****************************************************

 

Rendering (Single CPU): 394 CB-CPU

Rendering (Multiple CPU): 739 CB-CPU

 

Multiprocessor Speedup: 1.87

 

Shading (CINEMA 4D) : 479 CB-GFX

Shading (OpenGL Software Lighting) : 1851 CB-GFX

Shading (OpenGL Hardware Lighting) : 3936 CB-GFX

 

OpenGL Speedup: 8.22

 

****************************************************

 

XBench (no Disk - w/Disk 152 pts)

Results 187.10

System Info

Xbench Version 1.2

System Version 10.4.8 (8L2127)

Physical RAM 4096 MB

Model ADP2,1

Drive Type Maxtor 6Y200M0

CPU Test 124.83

GCD Loop 285.20 15.03 Mops/sec

Floating Point Basic 136.76 3.25 Gflop/sec

vecLib FFT 99.60 3.29 Gflop/sec

Floating Point Library 89.41 15.57 Mops/sec

Thread Test 235.05

Computation 215.17 4.36 Mops/sec, 4 threads

Lock Contention 258.98 11.14 Mlocks/sec, 4 threads

Memory Test 146.66

System 150.33

Allocate 117.80 432.61 Kalloc/sec

Fill 164.79 8012.48 MB/sec

Copy 185.21 3825.36 MB/sec

Stream 143.16

Copy 132.50 2736.68 MB/sec

Scale 134.42 2777.05 MB/sec

Add 155.53 3313.09 MB/sec

Triad 153.26 3278.67 MB/sec

Quartz Graphics Test 177.49

Line 150.04 9.99 Klines/sec [50% alpha]

Rectangle 182.58 54.51 Krects/sec [50% alpha]

Circle 176.48 14.39 Kcircles/sec [50% alpha]

Bezier 159.59 4.03 Kbeziers/sec [50% alpha]

Text 244.12 15.27 Kchars/sec

OpenGL Graphics Test 191.98

Spinning Squares 191.98 243.54 frames/sec

User Interface Test 467.06

Elements 467.06 2.14 Krefresh/sec

 

---

 

Going to OC this {censored} once I get new Mobo (Abit AW9D-MAX i975X) and PSU (be quiet! 700W straight power) - currently Asrock Conroe-XFire-eSATAII i945 (lacks Memory remapping above 3GB) and Enermax Coolergiant 485W (way underpowered, sys needs min 550W-600W).

 

Scores OCed past 3GHz should be interesting ...

Link to comment
Share on other sites

  • 1 month later...

CINEBENCH 9.5

****************************************************

 

Tester :

 

Processor : HackMac

MHz : 2410

Number of CPUs : 2

Operating System : 10.4.8

 

Graphics Card : nVidia 7600GS PCIe

Resolution :1600x1200

Color Depth : 32bpp

 

****************************************************

 

Rendering (Single CPU): 394 CB-CPU

Rendering (Multiple CPU): 725 CB-CPU

 

Multiprocessor Speedup: 1.84

 

Shading (CINEMA 4D) : 482 CB-GFX

Shading (OpenGL Software Lighting) : 1936 CB-GFX

Shading (OpenGL Hardware Lighting) : 4515 CB-GFX

 

OpenGL Speedup: 9.37

 

****************************************************

Results 131.17

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 2048 MB

Model ACPI

Drive Type WDC WD2000JD-00HBB0

CPU Test 124.58

GCD Loop 282.05 14.87 Mops/sec

Floating Point Basic 135.89 3.23 Gflop/sec

vecLib FFT 100.66 3.32 Gflop/sec

Floating Point Library 88.75 15.45 Mops/sec

Thread Test 238.38

Computation 217.69 4.41 Mops/sec, 4 threads

Lock Contention 263.42 11.33 Mlocks/sec, 4 threads

Memory Test 153.59

System 144.13

Allocate 113.24 415.86 Kalloc/sec

Fill 178.29 8668.82 MB/sec

Copy 156.85 3239.72 MB/sec

Stream 164.39

Copy 153.17 3163.57 MB/sec

Scale 156.53 3233.93 MB/sec

Add 176.31 3755.88 MB/sec

Triad 174.12 3724.96 MB/sec

Quartz Graphics Test 179.09

Line 145.36 9.68 Klines/sec [50% alpha]

Rectangle 186.76 55.76 Krects/sec [50% alpha]

Circle 179.00 14.59 Kcircles/sec [50% alpha]

Bezier 159.62 4.03 Kbeziers/sec [50% alpha]

Text 260.90 16.32 Kchars/sec

OpenGL Graphics Test 171.75

Spinning Squares 171.75 217.87 frames/sec

Disk Test 64.09

Sequential 114.37

Uncached Write 119.58 73.42 MB/sec [4K blocks]

Uncached Write 102.78 58.15 MB/sec [256K blocks]

Uncached Read 130.21 38.11 MB/sec [4K blocks]

Uncached Read 108.66 54.61 MB/sec [256K blocks]

Random 44.52

Uncached Write 16.38 1.73 MB/sec [4K blocks]

Uncached Write 91.05 29.15 MB/sec [256K blocks]

Uncached Read 95.33 0.68 MB/sec [4K blocks]

Uncached Read 136.49 25.33 MB/sec [256K blocks]

Link to comment
Share on other sites

  • 3 weeks later...

Here's mine. This is OC'd to 3100@1066.

 

Results 191.15

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 2048 MB

Model ACPI

Drive Type WDC WD2500JS-41MVB1

CPU Test 162.08

GCD Loop 366.45 19.32 Mops/sec

Floating Point Basic 177.55 4.22 Gflop/sec

vecLib FFT 131.01 4.32 Gflop/sec

Floating Point Library 115.15 20.05 Mops/sec

Thread Test 623.56

Computation 571.27 11.57 Mops/sec, 4 threads

Lock Contention 686.37 29.53 Mlocks/sec, 4 threads

Memory Test 201.76

System 189.25

Allocate 154.58 567.65 Kalloc/sec

Fill 202.71 9856.42 MB/sec

Copy 224.76 4642.23 MB/sec

Stream 216.03

Copy 203.83 4209.96 MB/sec

Scale 206.08 4257.64 MB/sec

Add 228.35 4864.25 MB/sec

Triad 228.42 4886.45 MB/sec

Quartz Graphics Test 259.31

Line 191.78 12.77 Klines/sec [50% alpha]

Rectangle 246.56 73.61 Krects/sec [50% alpha]

Circle 237.17 19.33 Kcircles/sec [50% alpha]

Bezier 212.57 5.36 Kbeziers/sec [50% alpha]

Text 916.90 57.36 Kchars/sec

OpenGL Graphics Test 227.17

Spinning Squares 227.17 288.18 frames/sec

User Interface Test 717.05

Elements 717.05 3.29 Krefresh/sec

Disk Test 70.23

Sequential 99.61

Uncached Write 103.64 63.63 MB/sec [4K blocks]

Uncached Write 101.61 57.49 MB/sec [256K blocks]

Uncached Read 83.49 24.43 MB/sec [4K blocks]

Uncached Read 115.10 57.85 MB/sec [256K blocks]

Random 54.24

Uncached Write 20.44 2.16 MB/sec [4K blocks]

Uncached Write 132.93 42.56 MB/sec [256K blocks]

Uncached Read 97.23 0.69 MB/sec [4K blocks]

Uncached Read 142.34 26.41 MB/sec [256K blocks]

 

CINEBENCH 9.5

****************************************************

 

Tester : Me

 

Processor : Macfrost

MHz : 3100

Number of CPUs : 4

Operating System : 10.4.8

 

Graphics Card : 7600GT Silent

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 514 CB-CPU

Rendering (Multiple CPU): 1680 CB-CPU

 

Multiprocessor Speedup: 3.27

 

Shading (CINEMA 4D) : 848 CB-GFX

Shading (OpenGL Software Lighting) : 2502 CB-GFX

Shading (OpenGL Hardware Lighting) : 5878 CB-GFX

 

OpenGL Speedup: 6.93

 

****************************************************

Link to comment
Share on other sites

  • 2 months later...

Overclocking work in progress. E6300 1.86GHz @ 2.8Ghz, complete specs in sig.

 

 

CINEBENCH 9.5

****************************************************

 

Tester : me

 

Processor : Hackintosh

MHz : 2800

Number of CPUs : 2

Operating System : Mac OS 10.4.8

 

Graphics Card : nVIDIA 7600GT

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 463 CB-CPU

Rendering (Multiple CPU): 851 CB-CPU

 

Multiprocessor Speedup: 1.84

 

Shading (CINEMA 4D) : 560 CB-GFX

Shading (OpenGL Software Lighting) : 2230 CB-GFX

Shading (OpenGL Hardware Lighting) : 5209 CB-GFX

 

OpenGL Speedup: 9.30

 

****************************************************

 

 

 

Xbench-no disk test: 222.05 xbench_noHD__2.8GHz_.txt

Link to comment
Share on other sites

Intel xbx2 / xeon 3050 @ 3.0 Ghz /  Korsair KVR 800 @ 752Mhz _ 4-4-4-9 / XFX GeForce 7300 GT / W/O disk

 Results	226.75
 System Info		
 Xbench Version		1.3
 System Version		10.4.8 (8L2127)
 Physical RAM		1024 MB
 Model			ADP2,1
 Drive Type		ST3250620AS

 CPU Test	156.52	
	 GCD Loop	354.27	18.67 Mops/sec
	 Floating Point Basic	171.65	4.08 Gflop/sec
	 vecLib FFT	125.81	4.15 Gflop/sec
	 Floating Point Library	111.62	19.44 Mops/sec
 Thread Test	297.39	
	 Computation	275.48	5.58 Mops/sec, 4 threads
	 Lock Contention	323.09	13.90 Mlocks/sec, 4 threads
 Memory Test	185.75	
	 System	192.04	
	 Allocate	166.55	611.61 Kalloc/sec
	 Fill	223.40	10862.19 MB/sec
	 Copy	194.51	4017.45 MB/sec
	 Stream	179.86	
	 Copy	168.73	3485.09 MB/sec
	 Scale	171.80	3549.23 MB/sec
	 Add	191.31	4075.35 MB/sec
	 Triad	189.92	4062.94 MB/sec
 Quartz Graphics Test	202.95	
	 Line	183.93	12.25 Klines/sec [50% alpha]
	 Rectangle	235.83	70.41 Krects/sec [50% alpha]
	 Circle	226.74	18.48 Kcircles/sec [50% alpha]
	 Bezier	204.77	5.16 Kbeziers/sec [50% alpha]
	 Text	176.51	11.04 Kchars/sec
 OpenGL Graphics Test	222.56	
	 Spinning Squares	222.56	282.34 frames/sec
 User Interface Test	524.96	
	 Elements	524.96	2.41 Krefresh/sec

 

Intel xbx2 / xeon 3050 @ 3.0 Ghz / Korsair KVR 800 @ 752 Mhz _ 4-4-4-9 / XFX GeForce 7300 GT / Seagate 7200.10 250 gb SATA

Results	159.66	
System Info		
	Xbench Version		1.3
	System Version		10.4.8 (8L2127)
	Physical RAM		1024 MB
	Model		ADP2,1
	Drive Type		ST3250620AS

CPU Test	156.25	
	GCD Loop	354.88	18.71 Mops/sec
	Floating Point Basic	171.82	4.08 Gflop/sec
	vecLib FFT	124.88	4.12 Gflop/sec
	Floating Point Library	111.67	19.44 Mops/sec
Thread Test	300.41	
	Computation	275.41	5.58 Mops/sec, 4 threads
	Lock Contention	330.41	14.21 Mlocks/sec, 4 threads
Memory Test	179.83	
	System	170.94	
	Allocate	126.28	463.73 Kalloc/sec
	Fill	222.73	10829.52 MB/sec
	Copy	194.52	4017.83 MB/sec
Stream	189.69	
		Copy	175.92	3633.50 MB/sec
		Scale	176.38	3643.85 MB/sec
		Add	205.27	4372.77 MB/sec
		Triad	205.72	4400.87 MB/sec
Quartz Graphics Test	219.29	
	Line	181.72	12.10 Klines/sec [50% alpha]
	Rectangle	236.35	70.56 Krects/sec [50% alpha]
	Circle	226.17	18.44 Kcircles/sec [50% alpha]
	Bezier	202.18	5.10 Kbeziers/sec [50% alpha]
	Text	270.32	16.91 Kchars/sec
OpenGL Graphics Test	224.30	
	Spinning Squares	224.30	284.53 frames/sec
User Interface Test	653.00	
	Elements	653.00	3.00 Krefresh/sec
Disk Test	55.54	
	Sequential	120.27	
		Uncached Write	83.33	51.16 MB/sec [4K blocks]
		Uncached Write	137.55	77.83 MB/sec [256K blocks]
		Uncached Read	137.01	40.10 MB/sec [4K blocks]
		Uncached Read	149.49	75.13 MB/sec [256K blocks]
	Random	36.11	
		Uncached Write	11.98	1.27 MB/sec [4K blocks]
		Uncached Write	101.15	32.38 MB/sec [256K blocks]
		Uncached Read	91.59	0.65 MB/sec [4K blocks]
		Uncached Read	154.08	28.59 MB/sec [256K blocks]

 

Intel xbx2 / xeon 3050 @ 3.0 Ghz / Korsair KVR 800 @ 752 Mhz _ 4-4-4-9 / XFX GeForce 7300 GT / Seagate 7200.7 200 gb IDE

Results	155.98	
System Info		
	Xbench Version		1.3
	System Version		10.4.8 (8L2127)
	Physical RAM		1024 MB
	Model		ADP2,1
	Drive Type		ST3200822A
CPU Test	154.31	
	GCD Loop	354.41	18.68 Mops/sec
	Floating Point Basic	171.83	4.08 Gflop/sec
	vecLib FFT	120.17	3.96 Gflop/sec
	Floating Point Library	111.62	19.44 Mops/sec
Thread Test	300.67	
	Computation	274.20	5.55 Mops/sec, 4 threads
	Lock Contention	332.79	14.32 Mlocks/sec, 4 threads
Memory Test	183.33	
	System	179.70	
		Allocate	137.86	506.26 Kalloc/sec
		Fill	223.27	10855.85 MB/sec
		Copy	201.54	4162.80 MB/sec
	Stream	187.10	
		Copy	172.68	3566.68 MB/sec
		Scale	178.88	3695.52 MB/sec
		Add	200.01	4260.61 MB/sec
		Triad	200.09	4280.36 MB/sec
Quartz Graphics Test	219.49	
	Line	182.87	12.18 Klines/sec [50% alpha]
	Rectangle	235.36	70.27 Krects/sec [50% alpha]
	Circle	226.92	18.50 Kcircles/sec [50% alpha]
	Bezier	203.27	5.13 Kbeziers/sec [50% alpha]
	Text	267.66	16.74 Kchars/sec
OpenGL Graphics Test	217.99	
	Spinning Squares	217.99	276.53 frames/sec
User Interface Test	649.75	
	Elements	649.75	2.98 Krefresh/sec
Disk Test	52.82	
	Sequential	107.78	
		Uncached Write	108.50	66.62 MB/sec [4K blocks]
		Uncached Write	105.89	59.91 MB/sec [256K blocks]
		Uncached Read	96.57	28.26 MB/sec [4K blocks]
		Uncached Read	123.52	62.08 MB/sec [256K blocks]
	Random	34.98	
		Uncached Write	11.77	1.25 MB/sec [4K blocks]
		Uncached Write	81.16	25.98 MB/sec [256K blocks]
		Uncached Read	97.50	0.69 MB/sec [4K blocks]
		Uncached Read	146.29	27.15 MB/sec [256K blocks]

 

 

also Geekbench:

Overall Score: 320.4

Link to comment
Share on other sites

Specs: Intel Core 2 DUO E6600 overclocked to 3.4ghz

Idle temp: 29c-31c

Load temp: 48c-51c

 

Motherboard: Gigabyte 965P-DQ6

Ram: 2x1gb Corsair XMS2 DDR2@800mhz

 

Watercooled

 

Pics: http://forum.insanelymac.com/index.php?s=&...st&p=323999

 

 

 

CINEBENCH 9.5

 

Tester : Nykwil

 

Processor : Hackintosh G5

MHz : 3400

Number of CPUs : 2

Operating System : 10.4.8

 

Graphics Card : ATI X1950XTX

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

Rendering (Single CPU): 545 CB-CPU

Rendering (Multiple CPU): 1006 CB-CPU

 

Multiprocessor Speedup: 1.85

 

Shading (CINEMA 4D) : 652 CB-GFX

Shading (OpenGL Software Lighting) : 2513 CB-GFX

Shading (OpenGL Hardware Lighting) : 5055 CB-GFX

 

OpenGL Speedup: 7.75

****************************************************

 

 

Xbench (with disk)

 

Results 175.12

 

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 2048 MB

Model ADP2,1

Drive Type ST3500630AS

CPU Test 175.16

GCD Loop 394.37 20.79 Mops/sec

Floating Point Basic 192.23 4.57 Gflop/sec

vecLib FFT 142.85 4.71 Gflop/sec

Floating Point Library 123.48 21.50 Mops/sec

Thread Test 332.96

Computation 306.86 6.22 Mops/sec, 4 threads

Lock Contention 363.92 15.66 Mlocks/sec, 4 threads

Memory Test 201.16

System 225.26

Allocate 193.39 710.19 Kalloc/sec

Fill 230.42 11203.31 MB/sec

Copy 262.67 5425.31 MB/sec

Stream 181.71

Copy 168.09 3471.84 MB/sec

Scale 173.26 3579.43 MB/sec

Add 194.33 4139.71 MB/sec

Triad 194.33 4157.24 MB/sec

Quartz Graphics Test 250.38

Line 204.97 13.65 Klines/sec [50% alpha]

Rectangle 257.93 77.01 Krects/sec [50% alpha]

Circle 248.96 20.29 Kcircles/sec [50% alpha]

Bezier 223.33 5.63 Kbeziers/sec [50% alpha]

Text 367.66 23.00 Kchars/sec

OpenGL Graphics Test 272.97

Spinning Squares 272.97 346.28 frames/sec

User Interface Test 710.06

Elements 710.06 3.26 Krefresh/sec

Disk Test 58.06

Sequential 111.55

Uncached Write 84.75 52.03 MB/sec [4K blocks]

Uncached Write 138.18 78.18 MB/sec [256K blocks]

Uncached Read 123.27 36.07 MB/sec [4K blocks]

Uncached Read 114.81 57.70 MB/sec [256K blocks]

Random 39.25

Uncached Write 13.00 1.38 MB/sec [4K blocks]

Uncached Write 133.96 42.89 MB/sec [256K blocks]

Uncached Read 91.57 0.65 MB/sec [4K blocks]

Uncached Read 151.15 28.05 MB/sec [256K blocks]

 

 

Xbench (no disk)

 

Results 265.80

 

System Info

Xbench Version 1.3

System Version 10.4.8 (8L2127)

Physical RAM 2048 MB

Model ADP2,1

Drive Type ST3500630AS

CPU Test 173.35

GCD Loop 393.71 20.75 Mops/sec

Floating Point Basic 190.27 4.52 Gflop/sec

vecLib FFT 138.55 4.57 Gflop/sec

Floating Point Library 124.05 21.60 Mops/sec

Thread Test 334.01

Computation 305.15 6.18 Mops/sec, 4 threads

Lock Contention 368.90 15.87 Mlocks/sec, 4 threads

Memory Test 192.75

System 206.63

Allocate 157.01 576.58 Kalloc/sec

Fill 231.38 11250.00 MB/sec

Copy 261.27 5396.45 MB/sec

Stream 180.62

Copy 166.20 3432.77 MB/sec

Scale 173.37 3581.81 MB/sec

Add 194.05 4133.68 MB/sec

Triad 192.02 4107.87 MB/sec

Quartz Graphics Test 275.96

Line 205.53 13.68 Klines/sec [50% alpha]

Rectangle 262.94 78.50 Krects/sec [50% alpha]

Circle 251.42 20.49 Kcircles/sec [50% alpha]

Bezier 225.74 5.69 Kbeziers/sec [50% alpha]

Text 959.49 60.02 Kchars/sec

OpenGL Graphics Test 272.73

Spinning Squares 272.73 345.97 frames/sec

User Interface Test 750.49

Elements 750.49 3.44 Krefresh/sec

 

 

Overall Geekbench Score : 4413

Edited by Nykwil
Link to comment
Share on other sites

Specs: Intel Core 2 DUO E6600 overclocked to 3.4ghz

Idle temp: 29c-31c

Load temp: 48c-51c

 

hahaha ;)

My c2d at idle is 14C-15C and at full load is 40C-42C on passive cooling! (non overclocked also)

 

BTW- Xbench is a freaking joke, use geekbench2 and OpenMark and Cinebench :)

 

-DiaboliK

(Geekbench 2 benches)

Edited by DiaboliK
Link to comment
Share on other sites

hahaha :)

My c2d at idle is 14C-15C and at full load is 40C-42C on passive cooling! (non overclocked also)

 

BTW- Xbench is a freaking joke, use geekbench2 and OpenMark and Cinebench :whistle:

 

-DiaboliK

(Geekbench 2 benches)

 

1st of all, you have a 2ghz c2d.

2nd of all, you didn't factor in a warm room (my room is 80+ degrees in the winter time, and i cant control that) I"d like to see how warm YOUR room is.

3rd, considering i gained a 1ghz overclock for free using water with fans running at super low speeds of 1200 rpm at a silent 17db pushing 45cfms vs your temps at passive and not being actively cooled, it's nothing to laugh at.

 

your geekbenches however, I WILL laught at: :):hysterical::hysterical:

 

;)

Edited by Nykwil
Link to comment
Share on other sites

ambient room temp is 70F. and theres one fan in that system 1 40mm nidec betaV fan, when wrapped up in a g4 cube case its virtually silent :poster_oops:

 

as for my benches, i dont really care. i dont need all that power sucking my power bill!

 

the benches that are up there are just 2 of my computers i run here at my house, just to play around with and not acutally do real work other than graphic design and other stuff.

 

your benches are nice, higher than kiko's, but i still dont care :poster_oops:

 

-DiaboliK

Link to comment
Share on other sites

ambient room temp is 70F. and theres one fan in that system 1 40mm nidec betaV fan, when wrapped up in a g4 cube case its virtually silent :poster_oops:

 

as for my benches, i dont really care. i dont need all that power sucking my power bill!

 

the benches that are up there are just 2 of my computers i run here at my house, just to play around with and not acutally do real work other than graphic design and other stuff.

 

your benches are nice, higher than kiko's, but i still dont care :poster_oops:

 

-DiaboliK

 

yeah i dont care much for benches...nor my temps...it's all within limits. I dont notice any speed increases in todays high speed cpus anyway.

 

long as my media doesnt hiccup or lag when im doing mutiple things at once i'm fine

Edited by Nykwil
Link to comment
Share on other sites

  • 1 month later...

CINEBENCH 9.5

****************************************************

 

Tester : NapalmCandy

 

Processor : Core 2 Duo e6600

MHz : 3339

Number of CPUs : 2

Operating System : OSX 1.4.9

 

Graphics Card : Radeon x300

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 555 CB-CPU

Rendering (Multiple CPU): 1055 CB-CPU

 

Multiprocessor Speedup: 1.90

 

Shading (CINEMA 4D) : 677 CB-GFX

Shading (OpenGL Software Lighting) : 2554 CB-GFX

Shading (OpenGL Hardware Lighting) : 2724 CB-GFX

 

OpenGL Speedup: 4.02

 

****************************************************

Link to comment
Share on other sites

  • 1 month later...

specs in sig

 

CINEBENCH 9.5

****************************************************

 

Tester :

 

Processor : Pentium D 805

MHz : 3600

Number of CPUs : 2

Operating System : OSX 10.4.8

 

Graphics Card : ATI Radeon 9800XT

Resolution :

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 303 CB-CPU

Rendering (Multiple CPU): 542 CB-CPU

 

Multiprocessor Speedup: 1.79

 

Shading (CINEMA 4D) : 383 CB-GFX

Shading (OpenGL Software Lighting) : 1236 CB-GFX

Shading (OpenGL Hardware Lighting) : 1487 CB-GFX

 

OpenGL Speedup: 3.88

 

****************************************************

Link to comment
Share on other sites

  • 2 weeks later...

CINEBENCH 9.5

****************************************************

 

Tester :

 

Processor :

MHz :

Number of CPUs : 2

Operating System :

 

Graphics Card :

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 511 CB-CPU

Rendering (Multiple CPU): 938 CB-CPU

 

Multiprocessor Speedup: 1.84

 

Shading (CINEMA 4D) : 629 CB-GFX

Shading (OpenGL Software Lighting) : 2541 CB-GFX

Shading (OpenGL Hardware Lighting) : 5881 CB-GFX

 

OpenGL Speedup: 9.35

 

****************************************************

Link to comment
Share on other sites

  • 1 month later...

CINEBENCH R10

****************************************************

 

Tester :

 

Processor :

MHz :

Number of CPUs : 4

Operating System : OS X 32 BIT 10.4.9

 

Graphics Card : ATI Radeon X1900 OpenGL Engine

Resolution : <fill this out>

Color Depth : <fill this out>

 

****************************************************

 

Rendering (Single CPU): 4056 CB-CPU

Rendering (Multiple CPU): 13862 CB-CPU

 

Multiprocessor Speedup: 3.42

 

Shading (OpenGL Standard) : 7749 CB-GFX

 

 

****************************************************

Link to comment
Share on other sites

  • 3 months later...

see my sig ..

 

also below is xbench without disk as is fashion in this thread.

 

Results 305.82

System Info

Xbench Version 1.3

System Version 10.5 (9A581)

Physical RAM 4096 MB

Model ACPI

Drive Type WDC WD740GD-00FLA2

CPU Test 208.39

GCD Loop 425.27 22.42 Mops/sec

Floating Point Basic 206.65 4.91 Gflop/sec

vecLib FFT 165.90 5.47 Gflop/sec

Floating Point Library 167.33 29.14 Mops/sec

Thread Test 340.34

Computation 322.35 6.53 Mops/sec, 4 threads

Lock Contention 360.47 15.51 Mlocks/sec, 4 threads

Memory Test 258.39

System 309.71

Allocate 479.30 1.76 Malloc/sec

Fill 248.39 12077.12 MB/sec

Copy 279.79 5778.87 MB/sec

Stream 221.66

Copy 211.68 4372.20 MB/sec

Scale 209.08 4319.57 MB/sec

Add 233.94 4983.33 MB/sec

Triad 234.51 5016.73 MB/sec

Quartz Graphics Test 351.91

Line 280.14 18.65 Klines/sec [50% alpha]

Rectangle 378.92 113.13 Krects/sec [50% alpha]

Circle 302.09 24.62 Kcircles/sec [50% alpha]

Bezier 291.68 7.36 Kbeziers/sec [50% alpha]

Text 793.27 49.62 Kchars/sec

OpenGL Graphics Test 284.47

Spinning Squares 284.47 360.87 frames/sec

User Interface Test 604.06

Elements 604.06 2.77 Krefresh/sec

Link to comment
Share on other sites

 Share

×
×
  • Create New...