36 replies to this topic

[shareuskadi]

I've updated on my Compaq Mini 701 and don't work sleep. The computer shuts down when closing but then I have to restart. I try with new kext sleepenabler patched for 10.6.5 but doesn't work.

[pateras]

for now sleep does not work!working on it....
if you put it to sleep it goes in : deep sleep

[2Shea]

The general extensions rar files are coming up as corrupt for me.

I've tried it on many different computers, and it's all the same. Any chance you can re-upload?

[pateras]

i know it,no need for new files just do a right click->extract files->miscellaneous->keep brocken files
on mac do the same,even thow it gives errors the files are ok,dont worry

[shareuskadi]

Since updating to 10.6.7 many times does not shut off completely and I've to use the button to power off. Any suggestions?

[franknag]

Same problem here with 10.6.7, no sleep and doesn't power off at all, HP mini 1030NR, I've tried with sleepenabler.kext for 10.6.7 and with DSDT.aml patch and modification. Please HELP.

[franknag]

SOLUTION FOUND BUDDIES!

For 10.6.7 users:

Use NetbookInstaller ...51 (The same one we used to install 10.6.7) and only check Disable Hibernation.

Download the file I've posted and put it in /Extra/GeneralExtensions and run rubber shoe.

Restart and welcome to sleep again.

PS. Remember to have your DSDT.aml file modified.

Attached Files

•  SleepEnabler.kext.zip   19.13K   59 downloads

[armyaircorp]

shareuskadi, on Apr 16 2011, 02:43 AM, said:

Since updating to 10.6.7 many times does not shut off completely and I've to use the button to power off. Any suggestions?

cpus=1

[shareuskadi]

franknag, on Apr 20 2011, 10:40 PM, said:

SOLUTION FOUND BUDDIES!

For 10.6.7 users:

Use NetbookInstaller ...51 (The same one we used to install 10.6.7) and only check Disable Hibernation.

Download the file I've posted and put it in /Extra/GeneralExtensions and run rubber shoe.

Restart and welcome to sleep again.

PS. Remember to have your DSDT.aml file modified.

Perfect, now it's working ok. Thanks.

[beninho]

Hello, I'm kinda new here. Over a year ago I first installed 10.6.2 on my girlfriends hp mini 1099ed. Worked fine. Still does. But I want to give it a go for the 10.6.3 - 10.6.7.

Now i got stuck after 10.6.4 installation. I Get KP on sleepenabler. It accidentally was not removed prior to 10.6.4 install.

I cannot boot from other bootloader but I can boot in external OS 10.6.2 wich I installed on a ext harddrive. So here what I hve done.

The sleepenabler is now removed fromt /extra/generals extensions and s/l/e. Got the rubber shoe running. But I still get KP over sleepenabler.

I've tried to use the modified netbookinstaller from meklor.com/?p=262 but still have KP of sleepenabler.

I boot with -v -f and boot with recovery=y fails too.

Please advice

edit

Got it fixed.

When booting with external drive re added the extra folder with last known kexts. Reboot and boot with shift and typing recovery=y I use netbook installer for bootloader en extensions. After that i Read my kext again and removed the sleepenabler.. wich seems to get back in the general extensions on it own run rubber shoe an reboot with -v -f reboot normaly and now have fully working 10.6.4

[pateras]

beninho, on May 2 2011, 08:49 AM, said:

Hello, I'm kinda new here. Over a year ago I first installed 10.6.2 on my girlfriends hp mini 1099ed. Worked fine. Still does. But I want to give it a go for the 10.6.3 - 10.6.7.

Now i got stuck after 10.6.4 installation. I Get KP on sleepenabler. It accidentally was not removed prior to 10.6.4 install.

I cannot boot from other bootloader but I can boot in external OS 10.6.2 wich I installed on a ext harddrive. So here what I hve done.

The sleepenabler is now removed fromt /extra/generals extensions and s/l/e. Got the rubber shoe running. But I still get KP over sleepenabler.

I've tried to use the modified netbookinstaller from meklor.com/?p=262 but still have KP of sleepenabler.

I boot with -v -f and boot with recovery=y fails too.

Please advice

edit

Got it fixed.

When booting with external drive re added the extra folder with last known kexts. Reboot and boot with shift and typing recovery=y I use netbook installer for bootloader en extensions. After that i Read my kext again and removed the sleepenabler.. wich seems to get back in the general extensions on it own run rubber shoe an reboot with -v -f reboot normaly and now have fully working 10.6.4

hi,you have 2 things you can do:
1.  use your sd to boot--->   insert the sd in netbook off,start the netbook and keep pressing f9 when you see the boot page enter in your mac partition when you boot in mac take it out ,run netbookinstaller and choose ONLY the first one(chameleon boot) go in extra and replace the general extensions ,delete the mkext in extra and system then run the rubber shoe and reboot

2.   in boot screen without the sd inserted write recovery=y wait and it will boot,do the same thing as obbove

then go with my guide and continue the update going up every time one by one 10.6.4-5-6-7 and always use the combo version and not the delta..

tell me if everything is ok

franknag, on Apr 20 2011, 10:40 PM, said:

SOLUTION FOUND BUDDIES!

For 10.6.7 users:

Use NetbookInstaller ...51 (The same one we used to install 10.6.7) and only check Disable Hibernation.

Download the file I've posted and put it in /Extra/GeneralExtensions and run rubber shoe.

Restart and welcome to sleep again.

PS. Remember to have your DSDT.aml file modified.

good job everything sleeps now ...

[galax65]

I followed the "mymacnetbook" guide and have (enough!) 10.6.2 on my compaq mini 700el.
Anybody has a trick to make the internal microphone working? It's still the missing thing...

[yellowviolent]

Any suggestions for updating to 10.6.8? AppleIntelGMA950.kext and AppleIntelIntegratedFramebuffer.kext now give me scrambled graphics on my 0x27ae8086 =(

[luniz7]

Im fairly new to this so forgive me if this is a dumb question.  I installed 10.6.3 on my HP Mini 1000 using Lemaurien's EFI method.  That being said, can I just update the kexts with the EFI updater or do I have to have NBI installed?  Thanks for any help.

[galax65]

galax65, on 07 June 2011 - 10:34 AM, said:

I followed the "mymacnetbook" guide and have (enough!) 10.6.2 on my compaq mini 700el.
Anybody has a trick to make the internal microphone working? It's still the missing thing...

Any news about how-to have the microphone working?

[chrisrand]

Sorry to resurect an old thread like this, but I have searched high and low, but there just isnt a definitive guide for the model I have which is the HP Mini 1030nr.

I can get as far as getting 10.6 working with a very old guide by LeMaurin. I used NetBookMaker 8.3 after restoring 10.6 dmg to a 8gb usb.

But no mater what update I use, combo or delta 10.6.1 through 10.6.8, they all break my system.

Please help me and the rest of those who aren't willing to ask.

[marugby123]

What are you doing once you install the combo updates? Are you making sure that you replace the kernel before you restart? After 10.6.2, the atom processors stopped getting support, so you need to make sure that you replace the kernel to the mach_atom kernel (after you install the update, but before restarting). Look into this. It is a widely discussed part of these netbook forums (I'm the moderator of the netbook forums, but have also written the most comprehensive guide for the Asus Netbooks 1000 series).

Marugby123
InsanelyMac Netbook Moderator