passw Posted November 9, 2009 Share Posted November 9, 2009 Hi.. anyone installed 10.6.2 yet? If so, any problems? Link to comment Share on other sites More sharing options...
Jamesisnotonfire Posted November 9, 2009 Share Posted November 9, 2009 Don't know, but if someone installs on AMD Can they confirm it's safe to update? Anyway, im downloading now.. i'll keep you updated. Link to comment Share on other sites More sharing options...
gatsu_1981 Posted November 9, 2009 Share Posted November 9, 2009 Don't know, but if someone installs on AMD Can they confirm it's safe to update? Anyway, im downloading now.. i'll keep you updated. Downloading it now on my P5Q, my config (now, before updating) is almost perfect (exluding sleep and powerstate). I will report back later... If my config will still be bootable ! Link to comment Share on other sites More sharing options...
spanakorizo Posted November 9, 2009 Share Posted November 9, 2009 make sure to say which one you downloaded (combo and delta have the same size cause 10.6.1 was like 10mb, so this is the 1st big update) EDIT: but via software update the size is only 157.7mb anyuway i'm allready downloading Link to comment Share on other sites More sharing options...
9z9 Posted November 9, 2009 Share Posted November 9, 2009 Be carefur. In my case I don't boot after update to 10.6.2. I see only panic kernel . Once booting with "boot132CD" don't working... (with -v -x arch=i386) HW: Gigabyte P45-UD3LR rev1, E6300, nVidia 9400GT... Link to comment Share on other sites More sharing options...
gatsu_1981 Posted November 9, 2009 Share Posted November 9, 2009 I'm downloading the chubby one (500 MB!!) from Apple System Update, nothing more, nothing less. Like a regular Apple user, he will get notification and he will install the update! WTF it's more like a Service Pack, I already was @ 10.6.1. 500 gb it's an enormity for a system update. Link to comment Share on other sites More sharing options...
spanakorizo Posted November 9, 2009 Share Posted November 9, 2009 9z9 most important is your installation method and not the hardware if u are on any kind of distro (kalyway etc) kp is the less Link to comment Share on other sites More sharing options...
Skevy Posted November 9, 2009 Share Posted November 9, 2009 My system kernel paniced as well - vanilla installation with Chameleon. The panic is in dsmos.kext. Link to comment Share on other sites More sharing options...
9z9 Posted November 9, 2009 Share Posted November 9, 2009 I have this "Vanilla" install from Blackosx user. Link to comment Share on other sites More sharing options...
akhenamenra Posted November 9, 2009 Share Posted November 9, 2009 Yep system panic p6t se Not to tecnical minded so just did a reinstall Link to comment Share on other sites More sharing options...
spanakorizo Posted November 9, 2009 Share Posted November 9, 2009 did u removed AppleIntelCPUPowerManagement.kext (+disable it) ? Link to comment Share on other sites More sharing options...
Jamesisnotonfire Posted November 9, 2009 Share Posted November 9, 2009 Just updated on amd system guys, works fine, booted well, just incase back up your kernel and boot with your backup kernel then restore it. Link to comment Share on other sites More sharing options...
akhenamenra Posted November 9, 2009 Share Posted November 9, 2009 Just updated on amd system guys, works fine, booted well, just incase back up your kernel and boot with your backup kernel then restore it. How would one back up the kernel and then reboot ? Link to comment Share on other sites More sharing options...
Jamesisnotonfire Posted November 9, 2009 Share Posted November 9, 2009 Also if your on AMD, Itunes and stuff will crash when you open it, you need to repatch your cpuid using marvins tools. You have to use os86 tools, click back up or restore, back it up, name it mach_backup_kernel save it to your installation drive, and when it comes up the bootloader without inverted commas type "mach_backup_kernel" Link to comment Share on other sites More sharing options...
rbm@pt Posted November 9, 2009 Share Posted November 9, 2009 Hi, Anyone try that in a netbook with Atom CPU. Thanks Link to comment Share on other sites More sharing options...
archer75 Posted November 9, 2009 Share Posted November 9, 2009 I just used the software update to update my p6t (non deluxe, non se) board and it worked fine. I picked up 3000 points in geekbench, probably because of the official support for core i7 processors. Lost sound though. Link to comment Share on other sites More sharing options...
CPT_MAC Posted November 9, 2009 Share Posted November 9, 2009 Did a fresh installation retail 10.6.0 , update 10.6.1 ans then I saw the 10.6.2, update and get now kernel panic at boot. Has anyone a solution before I reinstall fresh. Did a fresh installation retail 10.6.0 , update 10.6.1 ans then I saw the 10.6.2, update and get now kernel panic at boot. Has anyone a solution before I reinstall fresh. Link to comment Share on other sites More sharing options...
akhenamenra Posted November 9, 2009 Share Posted November 9, 2009 Also if your on AMD, Itunes and stuff will crash when you open it, you need to repatch your cpuid using marvins tools. You have to use os86 tools, click back up or restore, back it up, name it mach_backup_kernel save it to your installation drive, and when it comes up the bootloader without inverted commas type "mach_backup_kernel" thanks just installed and will try now.... Ill report back for the p6tse users Link to comment Share on other sites More sharing options...
kroat999 kroat999 Posted November 9, 2009 Share Posted November 9, 2009 Did a fresh installation retail 10.6.0 , update 10.6.1 ans then I saw the 10.6.2, update and get now kernel panic at boot. Has anyone a solution before I reinstall fresh. Did a fresh installation retail 10.6.0 , update 10.6.1 ans then I saw the 10.6.2, update and get now kernel panic at boot. Has anyone a solution before I reinstall fresh. just delete sleepenabler.kext and Software Update should work fine. Link to comment Share on other sites More sharing options...
netkas Posted November 9, 2009 Share Posted November 9, 2009 somebody still using dsmos.kext ? dude, update to fakesmc.kext instead. Link to comment Share on other sites More sharing options...
ytsestef Posted November 9, 2009 Share Posted November 9, 2009 I updated to 10.6.2. ASUS P5QL-E here, vanilla install with flash disk method, chameleon2 rc3. After update I got kernel panic in dsmos. Booted in WinXP, deleted dsmos.kext from /Extra and now everything works (or so it seems)! What are the consequences of deleting dsmos.text?? Link to comment Share on other sites More sharing options...
gatsu_1981 Posted November 9, 2009 Share Posted November 9, 2009 I discovered the sleepenabler problem by myself, then I discovered... that I don't need nullcpupowermanagement and sleepenabler! since 1) i'm on vanilla, so reboot and shutdown works even without openhalt 2) sleep doesn't work at all (it never worked for me) So, success for me, I only had to reboot under the leopard installation disk to delete sleepenabler. Retail installation do really pays off, guys! For me, no "modding" kext under /system/library/extension. Appleacpips2nub, fakesmc v2, ioahciblockstorage, uuid, voodoops2controller inside Extra. I still can hear my sound (voodooHDA), system profiler still working. P.s. posting from a full x64 kernel Link to comment Share on other sites More sharing options...
kroat999 kroat999 Posted November 9, 2009 Share Posted November 9, 2009 The nvidia mouse lag is gone with this update... i havent fixed this problem on 10.6.1 with this update the lag is gone .... Link to comment Share on other sites More sharing options...
ytsestef Posted November 9, 2009 Share Posted November 9, 2009 I updated to 10.6.2.ASUS P5QL-E here, vanilla install with flash disk method, chameleon2 rc3. After update I got kernel panic in dsmos. Booted in WinXP, deleted dsmos.kext from /Extra and now everything works (or so it seems)! What are the consequences of deleting dsmos.text?? Replying to myself here, I think fakesmc.kext nullifies the need for dsmos.kext. Is this right, or am I missing something here??? Link to comment Share on other sites More sharing options...
kroat999 kroat999 Posted November 9, 2009 Share Posted November 9, 2009 Replying to myself here, I think fakesmc.kext nullifies the need for dsmos.kext. Is this right, or am I missing something here??? right Link to comment Share on other sites More sharing options...
Recommended Posts