Jump to content

Power Mac G5 Quad, more powerful Graphics Card


7 posts in this topic

Recommended Posts

Hello!

I've bought a Power Mac G5 Quad, because it was relative cheep and has still a lot of power.

Now I'm thinking about installing a new and more powerful Graphics Card, but I'm not sure if the a EFI string in the boot.plist will work?

I know that the ROM used for the Power Macs is different to the one used in newer Intel Macs.

Thats the reason why, for example, a 8800GT made for the Mac Pro, won't work. But is it possible to enable QE/CI with a EFI string?

If this works, I could buy a normal Graphics Card and enable it the same way, like in my Hachintosh, right?

 

Thanks for reply!

Link to comment
Share on other sites

Hello!

I've bought a Power Mac G5 Quad, because it was relative cheep and has still a lot of power.

Now I'm thinking about installing a new and more powerful Graphics Card, but I'm not sure if the a EFI string in the boot.plist will work?

I know that the ROM used for the Power Macs is different to the one used in newer Intel Macs.

Thats the reason why, for example, a 8800GT made for the Mac Pro, won't work. But is it possible to enable QE/CI with a EFI string?

If this works, I could buy a normal Graphics Card and enable it the same way, like in my Hachintosh, right?

 

Thanks for reply!

 

Unfortunately just putting in a pc graphics card will not work. Due to the way the card is initialized. For u to get a pc graphics card to work in a true mac you would have to flash the card with a mac rom/bios. check this website out for info about flashing pc cards to mac

 

http://themacelite.wikispaces.com/

Link to comment
Share on other sites

Unfortunately just putting in a pc graphics card will not work. Due to the way the card is initialized. For u to get a pc graphics card to work in a true mac you would have to flash the card with a mac rom/bios. check this website out for info about flashing pc cards to mac

 

http://themacelite.wikispaces.com/

 

Thanks for your reply!

I've already found out, that the new Intel Macs are using a EFI ROM, but the older PPC Macs, linke my G5, used a Open Firmware ROM.

So I now know that the best graphics card witch I can use is a Quadro FX 4500 or a flashed 7800GTX, but I haven't found the right ROM for the 7800GTX 256MB, because the Quadro has 512MB like some 7800GTX, but they are hard to get and that's why I've bought a 7800GTX 256MB.

 

Maybe someone knows a page, were I can get the right ROM.

Here are a lot of ROMs, but there is non for the 7800GTX 256MB: http://themacelite.wikidot.com/wikidownloads2

Link to comment
Share on other sites

Thanks for your reply!

I've already found out, that the new Intel Macs are using a EFI ROM, but the older PPC Macs, linke my G5, used a Open Firmware ROM.

So I now know that the best graphics card witch I can use is a Quadro FX 4500 or a flashed 7800GTX, but I haven't found the right ROM for the 7800GTX 256MB, because the Quadro has 512MB like some 7800GTX, but they are hard to get and that's why I've bought a 7800GTX 256MB.

 

Maybe someone knows a page, were I can get the right ROM.

Here are a lot of ROMs, but there is non for the 7800GTX 256MB: http://themacelite.wikidot.com/wikidownloads2

 

you will have to use the 7800gt rom and mod the rom for the correct clock speeds

 

use hexedit

Link to comment
Share on other sites

"theMacElite" wow, so that's where StrangeDogs went...

 

I used to be a member of that old site, and my G4 PowerMac is still running the flashed 9800Pro AGP card that their forum helped me create. And I also owe them thanks for pointing me here, as their board was the first place I heard of a "hackintosh" on a thread called "Hackintosh faster than a G5 ?!?" back in the deadmoo days...

Link to comment
Share on other sites

 Share

×
×
  • Create New...