Kvasir Posted October 24, 2009 Share Posted October 24, 2009 Ragazzi come da titolo ho bisogno del vostro aiuto per cambiare la risoluzione della mia scheda video una HD3470 mobility. So che qe/ci non sono abilitabili, ma volevo almeno rendere tutto un pò meno stressante cambiando la risoluzione e portandola a 1280x800. Ora, però, ho un problema. Non trovo i kext adatti.... Potete indicarmeli? Link to comment Share on other sites More sharing options...
pacciupelulecce Posted June 4, 2010 Share Posted June 4, 2010 Ragazzi come da titolo ho bisogno del vostro aiuto per cambiare la risoluzione della mia scheda video una HD3470 mobility. So che qe/ci non sono abilitabili, ma volevo almeno rendere tutto un pò meno stressante cambiando la risoluzione e portandola a 1280x800. Ora, però, ho un problema. Non trovo i kext adatti.... Potete indicarmeli? come posso fare a cambiare risoluzione? Link to comment Share on other sites More sharing options...
iggy63 Posted June 4, 2010 Share Posted June 4, 2010 Prova a cercare anche qui: http://www.kexts.com/cat/4-videocards.html Altrimenti prova a scrivere questa stringa con la risoluzione che desideri nel file in extra: " com.apple.Boot.plist" <key>Graphics Mode</key> <string>1920x1200x32</string> Link to comment Share on other sites More sharing options...
pacciupelulecce Posted June 5, 2010 Share Posted June 5, 2010 Prova a cercare anche qui: http://www.kexts.com/cat/4-videocards.html Altrimenti prova a scrivere questa stringa con la risoluzione che desideri nel file in extra: " com.apple.Boot.plist" <key>Graphics Mode</key> <string>1920x1200x32</string> Grazie per avermi risposto sul sito che mi hai indicato purtroppo non ha trovato nulla e modificando il *.plist non ho risolto, ho trovato il mio notebook qui: http://wiki.osx86project.org/wiki/index.ph.../Portables#F5SL per avere la disponibilità di tutte le risoluzioni hanno utilizzato RadeonHD.kext ma non capisco esattamente, cosa devo fare esattamente: What type of card: Integrated, PCIe, x16 Model: ATI Mobility Radeon HD 3470 PCIID: 1002:95C4 Memory: 256 MB Patches: replace original ATIRadeonX2000.kext with RadeonHD.kext from here Note: Does not support Apple CI/QE. All resolutions available? Yes Link to comment Share on other sites More sharing options...
mrmojorisin17 Posted June 5, 2010 Share Posted June 5, 2010 Devi sostituire il kext del link con quello che hai te in S/L/E. Link to comment Share on other sites More sharing options...
pacciupelulecce Posted June 5, 2010 Share Posted June 5, 2010 Devi sostituire il kext del link con quello che hai te in S/L/E. Lanciando l'utility System Profiler nel contenuto Hardware e scegliendo Grafica/Monitor: Tipo: Monitor Bus: PCIe Larghezza Lane PCIe: x16 VRAM (totale): 256 MB Fornitore: ATI (0x1002) ID dispositivo: 0x95c4 ID revisione: 0x0000 Informazioni su estensione Kernel: Nessun Kext caricato Monitor: Monitor: Risoluzione: 1024 x 768 Profonditˆ: Colore 32-Bit Core Image: Software Monitor principale: S“ Mirror: Spento Online: S“ Quartz Extreme: Non Supportata invece nel contenuto Software e scegliendo Estensioni trovo, tra gli altri, IOGraphicsFamily.kext ma non è presente ATIRadeonX2000.kext infatti rimuovendo quest'ultimo e installando RadeonHD.kext non ho risolto. Forse dovrei editare o rimuovere IOGraphicsFamily.kext? Link to comment Share on other sites More sharing options...
Giorgio_multi Posted June 5, 2010 Share Posted June 5, 2010 Il problema è che tale scheda grafica ATI mobility purtroppo non è supportata ne da Leopard ne da Snow Giorgio Link to comment Share on other sites More sharing options...
pacciupelulecce Posted June 5, 2010 Share Posted June 5, 2010 Il problema è che tale scheda grafica ATI mobility purtroppo non è supportata ne da Leopard ne da Snow Giorgio certamente, tuttavia io non sono interessato al QE/CI vorrei solo la risoluzione nativa, molti utenti con il RadeonHD.kext hanno risolto questo problema, solo che va "modificato" aggiungendo nel plist gli edid che vanno ricavati con dei programmi come monitor info view, per ora però non sono riuscito a capire come si usa. grazie Link to comment Share on other sites More sharing options...
geminimac Posted June 5, 2010 Share Posted June 5, 2010 certamente, tuttavia io non sono interessato al QE/CI vorrei solo la risoluzione nativa, molti utenti con il RadeonHD.kext hanno risolto questo problema, solo che va "modificato" aggiungendo nel plist gli edid che vanno ricavati con dei programmi come monitor info view, per ora però non sono riuscito a capire come si usa. grazie prova a vedere se con SwitchResX cambia qualcosa saluti Link to comment Share on other sites More sharing options...
pacciupelulecce Posted June 6, 2010 Share Posted June 6, 2010 prova a vedere se con SwitchResX cambia qualcosa saluti grazie per il consiglio ma non funziona Link to comment Share on other sites More sharing options...
pacciupelulecce Posted June 6, 2010 Share Posted June 6, 2010 @paddy159 Hi, patrick, here's what I did, step by step, to get it to work: ( I'll make it very detailed for the benefit of others) 1. boot into windows 2. download softMMc from: http://www.entechtaiwan.com/files/softmccs.exe 3. install the software, run it and choose from the file menu, 'save report' - save it to your desktop and close the program. 4. Open the saved report, somewhere towards the bottom you will see Raw EDID = select and copy the long continuous string (mixture of numbers and letters) you see after this. 5. To change hex to base64, go to the website: http://home2.paulschou.net/tools/xlate/ and paste the raw edid data into the HEX box and click the'decode' tab under that box 6. copy what appears in the base64 box and paste into a text file and save for safe keeping. 7. If you can't/don't access your NTFS partitions from OS X, copy this file to a USB stick, HD, FAT32 partition etc. 8. boot back into OS X 9. download RadeonHD kext from the first post in this thread 10. right-click the kext, choose 'show package contents', open the folder 'contents' 11. open the file with your saved edid in b64 format and copy the string 12. Going back to the RadeonHD.kext contents folder, open the file info (info.plist) with Textedit and scroll down until you come to the section EDID and highlight the 3 or 4 lines of text (this is an edid from another PC) - then paste your own edid instead. Don't worry if this appears as one long line or 2 lines or whatever, just make sure it starts at the right place. 13. close/save the modified plist, close the kext 14. download osx86 tools from: http://code.google.com/p/osx86tools/ 15. run osx86 tools, choose install kexts, choose RadeonHD kext , follow the prompts 16. reboot Some further notes about my experience: I first tried the kext without putting my edid into it (it already contains an edid from some other PC) - it worked fine but the only resolutions available were 640x480, 800x600, 1024x768, 1280x1024, 1400x1050 - which were of no use to me. With my edid inserted I only get 1280x800 - but that's all I need. After rebooting the first time, it seemed to hang at a white/grey screen, I forcibly powered off, rebooted and it's been fine since. Instead of a cursor I initially got a opaque box with a thin green line (quite fun to use!), so I redited the plist, changing <key>enableHWCursor</key><true/> to <false/> and rebooted a couple of times Thanks again to Dong for his work. ci sono riuscito ho seguito la guida dell'utente Pegasys che ho trovato nel thread di Dong http://www.insanelymac.com/forum/index.php?showtopic=190586 grazie a tutti Link to comment Share on other sites More sharing options...
gabiz_ro Posted June 12, 2010 Share Posted June 12, 2010 Could somebody take a dump of vbios of HD 3470 and provide me? Thanks Link to comment Share on other sites More sharing options...
iSnob Posted June 13, 2010 Share Posted June 13, 2010 io ho una 5770,e il sistema si avviava a una risoluzione streusa,ho modificato i parametri del boot dal chamaleon con lizard,mettendo la ris del mio monitor. ora anche se la scheda video non è supportata e non ho accellerazione video,almeno vedo alla mia risoluzione Link to comment Share on other sites More sharing options...
Recommended Posts