gdfan Posted September 28, 2009 Share Posted September 28, 2009 Hey Guys, I have some problems with Snow Leopard and my KVM switch, if i switch away from sl and come than back i get same kernel panics. System: q9550 EP45 DS3L 8 GB DDR2 800 8600 GT Patched DSTD for video and network. The system is stable as a rock, but this Problem i cant solve. Under Leo i havn't it, but Leo did not use the patched DSTD. Are there any Ninject driver for Sl or have anyone a other idea? Thanks for any Solutions greetz gdfan PS: Sorry for my bad english Link to comment Share on other sites More sharing options...
BladeRunner Posted September 28, 2009 Share Posted September 28, 2009 Hey Guys, I have some problems with Snow Leopard and my KVM switch,if i switch away from sl and come than back i get same kernel panics. System: q9550 EP45 DS3L 8 GB DDR2 800 8600 GT Patched DSTD for video and network. The system is stable as a rock, but this Problem i cant solve. Under Leo i havn't it, but Leo did not use the patched DSTD. Are there any Ninject driver for Sl or have anyone a other idea? Thanks for any Solutions greetz gdfan PS: Sorry for my bad english I have used a KVM switch on my systems for the past few years without any problem. I use it to switch between systems running WinXP, Leopard - now Snow Leopard and a Linux system that functions as my firewall/router. On Mac OS X I use VoodooPS2Controller.kext and Chameleon2-RC3 with PC-EFI-10.3 to get the GraphicsEnabler injectors to work. Prior to using PC-EFI-10.3 I had EFI strings made by gfxstudio to enable my GeForce 8400 GS card to be recognized correctly. I have never experienced kernel panics caused by switching between systems. Wish I could help. Good luck getting the problem resolved. Link to comment Share on other sites More sharing options...
elviejo Posted September 28, 2009 Share Posted September 28, 2009 I had the same problem with SL, but, in my case, I use a usb kvm switch; I think SL check periodically and when don't found a display attached panicked, that's what need to be resolved. Link to comment Share on other sites More sharing options...
gdfan Posted September 28, 2009 Author Share Posted September 28, 2009 I have a DVI USB Switch too Link to comment Share on other sites More sharing options...
srs5694 Posted September 28, 2009 Share Posted September 28, 2009 I had the same problem with SL, but, in my case, I use a usb kvm switch; I think SL check periodically and when don't found a display attached panicked, that's what need to be resolved. If this is what's happening, then a workaround might be to plug in an extra keyboard. It wouldn't have to be the one you use, it'd just have to be something to make OS X see that there's a keyboard present. (Adding a mouse might help, too.) You might be able to tuck it away behind the computer or something. It's also conceivable that a different brand/model of KVM would fix the problem, but that's likely to be a more expensive solution, and you might have to try several different models before you found one that worked. Link to comment Share on other sites More sharing options...
BladeRunner Posted September 28, 2009 Share Posted September 28, 2009 The unit I am using is a Zonet 3004 - 4 port KVM switch. I just did a quick search on Google and I think that unit may have been replaced by a later model number. The reason I purchased this specific model was that it included a complete set of cables so I avoided any cable purchase errors. And, it was listed as being "hot swappable" so I could connect or remove a pc without the need to power down. There was also some text in the specs that said from the PC point of view there was always a monitor/keyboard/mouse connected. That sounded like a good thing to me. The new Zonet 4 port KVM switches appear to run about $40 to $50 USD at places like CDW or NewEgg. Link to comment Share on other sites More sharing options...
gdfan Posted September 29, 2009 Author Share Posted September 29, 2009 I tried it witch an additional Keyboard but I could not solve the problem. I would try now to install the graphic kexte from Leo under SL. Is this a good idea or not? Link to comment Share on other sites More sharing options...
elviejo Posted September 30, 2009 Share Posted September 30, 2009 I tried it witch an additional Keyboard but I could not solve the problem. I would try now to install the graphic kexte from Leo under SL. Is this a good idea or not? Probably not, remember, is not the kext, that behavior occur with whatever video card you are using; anyway, I found this happening when you are running safari or any other app., the best solution until somebody found the real cause, is to let the display go to sleep before switching the kvm. Link to comment Share on other sites More sharing options...
gdfan Posted September 30, 2009 Author Share Posted September 30, 2009 Display Sleeping? How does this works? Link to comment Share on other sites More sharing options...
gdfan Posted October 2, 2009 Author Share Posted October 2, 2009 I found this option, but it doesnt solve the problem Link to comment Share on other sites More sharing options...
gdfan Posted October 15, 2009 Author Share Posted October 15, 2009 ????? Link to comment Share on other sites More sharing options...
CTAC Posted October 15, 2009 Share Posted October 15, 2009 I have a DVI USB Switch too Do you get KP immediately after switching through KVM? I have an IOGear KVM, but I only use it as a USB switch for Keyboard and Mouse for the Video part I just use dedicated Monitor inputs and switch on the monitor. Link to comment Share on other sites More sharing options...
gdfan Posted October 16, 2009 Author Share Posted October 16, 2009 Yes I use this switch for audio, video and usb switching This Problem is really annoying Link to comment Share on other sites More sharing options...
Recommended Posts