burnin Posted September 24, 2009 Share Posted September 24, 2009 Hi! CI/QE worked perfectly in my Leopard install with NVinject 0.2.1. I installed Snow Leopard and tried NVinject 0.2.2, but when i start the computer it doesnt display a clear image... its like it is using 256 colors or less.. I already tried EFIStudio (my card isnt showing, and i tried to add device), I followed a tutorial to make the efi string, it didnt work too, I tried NVEnabler 0.1, I tried Enabler_for_Nvidia_and_multiple_ATI_cards.pkg, none seems to work with my cards.. can anyone help me with this? thanks! Link to comment Share on other sites More sharing options...
humru Posted September 30, 2009 Share Posted September 30, 2009 my problem 8400m g Link to comment Share on other sites More sharing options...
olvko Posted September 30, 2009 Share Posted September 30, 2009 I had the same problem - I used a NVinject from http://www.filefactory.com/file/a0b552h/n/SL64_Kexts_zip and now QE is working, altough it sees my card not as 8400 but 8600. Link to comment Share on other sites More sharing options...
burnin Posted October 1, 2009 Author Share Posted October 1, 2009 I cant boot with that NVinject..the boot hangs.. i'm gonna try on a clean install Link to comment Share on other sites More sharing options...
MacProUser83 Posted October 1, 2009 Share Posted October 1, 2009 I cant boot with that NVinject..the boot hangs.. i'm gonna try on a clean install have you tried GraphicsEnabler=yes Link to comment Share on other sites More sharing options...
burnin Posted October 1, 2009 Author Share Posted October 1, 2009 I had the same problem - I used a NVinject from http://www.filefactory.com/file/a0b552h/n/SL64_Kexts_zip and now QE is working, altough it sees my card not as 8400 but 8600. It worked! Thank you man! Seriouly, Thank You. Finally I have it working! have you tried GraphicsEnabler=yes I had tried that before, it didnt help me;) thanks anyway Link to comment Share on other sites More sharing options...
denonade Posted November 9, 2009 Share Posted November 9, 2009 Hi! CI/QE worked perfectly in my Leopard install with NVinject 0.2.1. I installed Snow Leopard and tried NVinject 0.2.2, but when i start the computer it doesnt display a clear image... its like it is using 256 colors or less.. I already tried EFIStudio (my card isnt showing, and i tried to add device), I followed a tutorial to make the efi string, it didnt work too, I tried NVEnabler 0.1, I tried Enabler_for_Nvidia_and_multiple_ATI_cards.pkg, none seems to work with my cards.. can anyone help me with this? thanks! Hi burnin I have SONY VAIO FZ25 laptop, which also use nvidia 8400M GT this GPU. but I fail to make it work by different source of OSX86(iPC/iATKos/iDeneb). I have two problem 1) if install any GPU kext such as NVinject 0.2.1., the internal LCD display will switch off after osx booted up, and switch to external VGA display automatically 2) if don't install any GPU kext, I can't turn on CI/QE can you give me some advices on your solution? thx a lot Link to comment Share on other sites More sharing options...
burnin Posted November 9, 2009 Author Share Posted November 9, 2009 My Nvidia is 8400M G, your is 8400M GT. they are different. apparently there is no solution yet for your nvidia, http://www.insanelymac.com/forum/index.php...11271&st=40 Link to comment Share on other sites More sharing options...
chencho Posted December 4, 2009 Share Posted December 4, 2009 Hi all. i have the 8400M GS 128MB, and no way to enable QE/CI If i use FSL64_Kexts_zip i have a black screen after apple logo. Any tip to install it? I use 10,6,2 and chameleon with <key>GraphicsEnabler</key> <string>yes</string> Normal boot i think is 64bits. Link to comment Share on other sites More sharing options...
phlackeee Posted December 5, 2009 Share Posted December 5, 2009 Does anyone know how to make it work on nVidia Quadro FX 330, On leopard I had NVinjectGO, and both worked, but here on SL none. I have GraphicsEnable = y , but not. any direction from here, I have good res Chipset Model: Graphics by NVIDIA Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x040a Revision ID: 0x00a1 ROM Revision: NVinjectGo 0.2.0 Displays: Display Connector: Status: No Display Connected ASUS VW221: Resolution: 1680 x 1050 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Link to comment Share on other sites More sharing options...
redratfish Posted February 17, 2010 Share Posted February 17, 2010 I had the same problem - I used a NVinject from http://www.filefactory.com/file/a0b552h/n/SL64_Kexts_zip and now QE is working, altough it sees my card not as 8400 but 8600. hello can you reupload SL 64bit kexts to http://www.mediafire.com/ as filefactory wont let me download. please Link to comment Share on other sites More sharing options...
burnin Posted February 17, 2010 Author Share Posted February 17, 2010 http://www.megaupload.com/?d=XC6WC1ZX if you just need the nvinject kext, here you go..i cant download it now form FileFactory hello can you reupload SL 64bit kexts to http://www.mediafire.com/as filefactory wont let me download. please Link to comment Share on other sites More sharing options...
redratfish Posted February 17, 2010 Share Posted February 17, 2010 http://www.megaupload.com/?d=XC6WC1ZXif you just need the nvinject kext, here you go..i cant download it now form FileFactory Thanks Link to comment Share on other sites More sharing options...
Recommended Posts