countrykoekje Posted September 15, 2009 Share Posted September 15, 2009 Hello, I installed SL and got the following panic: "Unable to find driver for this platform: ACPI" (look at attached image) I have turned ACPI on and off, and I changed it from S1 to S3 and back, but none of it worked. iPC 1.5.6 works without any problems. my specs: -Intel Q6600; -MSI P35 Neo2 FR; -2* SATA hdd: 1*160Gb(GUID and 2 partitions HFS+ for SL and TM) and 1*500Gb (MBR and 2 partitions NTFS Windows 7 + Vista) -Nvidia Geforce 8800GT 512Mb Thanks! EDIT: I use EFI PC v10 and XNU Voodoo 9.6 Link to comment Share on other sites More sharing options...
full moon Posted September 16, 2009 Share Posted September 16, 2009 i using a same mb..... but it work fine with snow leopard retail. 1.you can try to update bios to 1b4 2.acpi on achi on s3 ,i set the cmos with these. 3.if you need,try to patch dsdt. Link to comment Share on other sites More sharing options...
countrykoekje Posted September 16, 2009 Author Share Posted September 16, 2009 Ok, I flashed thee bios to v1.A and I changed acpi to s3. same KP. @full moon: which kernel do you use? PS: I already use a patched dsdt.aml EDIT: iPC doesn't work anymore. Link to comment Share on other sites More sharing options...
full moon Posted September 17, 2009 Share Posted September 17, 2009 using 10.6 kernel...... Link to comment Share on other sites More sharing options...
countrykoekje Posted September 17, 2009 Author Share Posted September 17, 2009 when i use 10.6 kernel, the screen stays black at boot. I flashed the bios back to the kabyl rom, so ipc can start again. Link to comment Share on other sites More sharing options...
countrykoekje Posted September 17, 2009 Author Share Posted September 17, 2009 i now get following error before the panic: unable to load AppleACPIPlatform.kext. i tried different versions of the file, but i always get the same error. Link to comment Share on other sites More sharing options...
countrykoekje Posted September 18, 2009 Author Share Posted September 18, 2009 nobody? Link to comment Share on other sites More sharing options...
countrykoekje Posted September 25, 2009 Author Share Posted September 25, 2009 ok, I got it working with the original kernel. i reinstalled SL on the first partition of my hdd. everything works, only the sound doesnt work. when i use hdapatcher i get a KP. is there somebody who got alc888d working? thanks! ok, got it working. i used the voodooHDA.kext Link to comment Share on other sites More sharing options...
IntelQuadCore Posted September 30, 2009 Share Posted September 30, 2009 Hey CountryKoekje (Dutch?), I have a MSI P35 Neo2-FIR motherboard and want to install Snow Leopard. Before I used to run Leopard 10.5.5 on a modified BIOS. Could you redirect me to a usable tutorial on how to proceed? Or maybe you can write down your own settings and steps taken. Returning to a standard non-mod BIOS would be great, but I don't understand how to patch DSDT, so help on that would also be great. Thanks in advance, -niels (The Netherlands) Link to comment Share on other sites More sharing options...
matdo35 Posted October 2, 2009 Share Posted October 2, 2009 ok, I got it working with the original kernel.i reinstalled SL on the first partition of my hdd. everything works, only the sound doesnt work. when i use hdapatcher i get a KP. is there somebody who got alc888d working? thanks! ok, got it working. i used the voodooHDA.kext Hi countrykoekje, can you upload all file you have for installing SL on P35 Neo(your file DSDT.aml, kext file ...) I have download alc888 driver 64 bit few day ago, please find in attached, hope it will help you. i didn't try it because i'm unsuccessful install SL on my system. thank you x64_audio_for_ALC888.zip Link to comment Share on other sites More sharing options...
countrykoekje Posted October 4, 2009 Author Share Posted October 4, 2009 ok, i'll post the kexts and tools later today. i didn't use the dstd patch. ps: yes, dutch. Link to comment Share on other sites More sharing options...
countrykoekje Posted October 4, 2009 Author Share Posted October 4, 2009 hello, i have SL installed on the first partition of my hdd. here are all the file i used. hope i can help you. Link to comment Share on other sites More sharing options...
matdo35 Posted October 5, 2009 Share Posted October 5, 2009 fail again like the picture in the first post. Do you have any advice. Thanks. Link to comment Share on other sites More sharing options...
countrykoekje Posted October 6, 2009 Author Share Posted October 6, 2009 the kp was gone when i installed sl on a hdd with only one partition. do you use the original kernel? try installing chameleon rc2. hope that this helps you. Link to comment Share on other sites More sharing options...
shenhf5 Posted October 7, 2009 Share Posted October 7, 2009 Hi, congraturations! Would you like write down install steps and post it here? I'm trying install snow leopard to MSI P35 Neo2 Fr MB, but not lucky. Any way thanks the good news. Link to comment Share on other sites More sharing options...
passw0rd Posted October 14, 2009 Share Posted October 14, 2009 ok, I got it working with the original kernel.i reinstalled SL on the first partition of my hdd. everything works, only the sound doesnt work. when i use hdapatcher i get a KP. is there somebody who got alc888d working? thanks! ok, got it working. i used the voodooHDA.kext which version of voodooHDA.kext did u use? I do not have any sound on my snow leopard. Link to comment Share on other sites More sharing options...
themanwhosmiles Posted October 14, 2009 Share Posted October 14, 2009 Hi everybody, I got SL installed on a single partition hd with GUID partition scheme, but gives me KP. So, i'v tried to replace the mach_kernel with a modded one, but I get "Mach-O Bad Magic Number" on boot. KP with or without dsdt patch. The bootloader is the latest Chameleon, Leopard 10.5.x runs fine on the same rig (iDeneb, JaS, iPC). Is there a fix? Do I have to follow extra steps in order to boot SL in a smooth way? Thanks Link to comment Share on other sites More sharing options...
pajn Posted October 14, 2009 Share Posted October 14, 2009 Whit retail does you mean a cd i can order from apple? Sorry, I'm new to this. i using a same mb.....but it work fine with snow leopard retail. 1.you can try to update bios to 1b4 2.acpi on achi on s3 ,i set the cmos with these. 3.if you need,try to patch dsdt. Link to comment Share on other sites More sharing options...
Allan C Posted October 17, 2009 Share Posted October 17, 2009 I 'm very happy with my modified bios v.1B5 and any vanllia kernel. Only fakesmc.kext and PC EFI v10.4 loader needed. FLASH AT YOUR OWN RISK!!! For only MSI P35 NEO2-FR/FI aka MS-7345 mobo! 105_DSDT_SLIC.ROM md5:6942CA86738E7C25584D2957BF881AF7 105_DSDT_SLIC.zip Link to comment Share on other sites More sharing options...
pajn Posted October 18, 2009 Share Posted October 18, 2009 I 'm very happy with my modified bios v.1B5 and any vanllia kernel. k Only fakesmc.kext and PC EFI v10.4 loader needed. FLASH AT YOUR OWN RISK!!! For only MSI P35 NEO2-FR/FI aka MS-7345 mobo! 105_DSDT_SLIC.ROM md5:6942CA86738E7C25584D2957BF881AF7 Does you have a guide or something that tells how to do and what to do if something goes wrong? EDIT: What original bios is it based on? Does E0 stepping work on that bios? Link to comment Share on other sites More sharing options...
iamhappy Posted October 21, 2009 Share Posted October 21, 2009 Does you have a guide or something that tells how to do and what to do if something goes wrong? EDIT: What original bios is it based on? Does E0 stepping work on that bios? true, what bios is this 1B5 based on? I,m running 10.6.1 with v1.8 modified by kabyl from this thread http://www.insanelymac.com/forum/index.php?showtopic=109564 since i want to upgrade to an E0 quad, i need v1.A @countrykoekje: no success with original 1A bios ? Link to comment Share on other sites More sharing options...
iamhappy Posted October 23, 2009 Share Posted October 23, 2009 true, what bios is this 1B5 based on? I,m running 10.6.1 with v1.8 modified by kabyl from this thread http://www.insanelymac.com/forum/index.php?showtopic=109564 since i want to upgrade to an E0 quad, i need v1.A @countrykoekje: no success with original 1A bios ? i flashed my bios with your 1.B5 -> everything works with my new E0 Q9550 (wich requires 1A official) in windows (didn't test snow yet, but sure it will work too) BUT POST displays right id, THOUGH kind of messes up with clock generation, didn't find "the pattern" yet but 400x8,5 is NOT 3667Mhz. after booting every clock reporting tool in windows report right clocks, so i guess it is just a cosmetic error witch BIOS and POST messages? don't know if that happens with official 1A too (i guess 1B5 is beta and newer, so i have no clue why it has that bug) eg. if i enable EIST in Bios, multiplier set to 8,5, as soon as enable it, the values below for resulting clock are not "correct in relationship to the chosen FSB"- if i disable EIST -> it imideately displays correct clock. switch back on -> wrong clock.......... any info on that? + THANK YOU for "whatever" you modified (would be nice to know what exactely) cheers so this works with E0 nice Link to comment Share on other sites More sharing options...
pajn Posted October 23, 2009 Share Posted October 23, 2009 i flashed my bios with your 1.B5 -> everything works with my new E0 Q9550 (wich requires 1A official) in windows (didn't test snow yet, but sure it will work too) BUT POST displays right id, THOUGH kind of messes up with clock generation, didn't find "the pattern" yet but 400x8,5 is NOT 3667Mhz. after booting every clock reporting tool in windows report right clocks, so i guess it is just a cosmetic error witch BIOS and POST messages? don't know if that happens with official 1A too (i guess 1B5 is beta and newer, so i have no clue why it has that bug) eg. if i enable EIST in Bios, multiplier set to 8,5, as soon as enable it, the values below for resulting clock are not "correct in relationship to the chosen FSB"- if i disable EIST -> it imideately displays correct clock. switch back on -> wrong clock.......... any info on that? + THANK YOU for "whatever" you modified (would be nice to know what exactely) cheers so this works with E0 nice Nice! How did you do to flash your mb? Link to comment Share on other sites More sharing options...
Limited87 Posted November 6, 2009 Share Posted November 6, 2009 Hey, can anyone post the bios settings please i´m using the patched bios from this thread. MyBios settings: MPS Table: 1.4 IOAPIC: Enabled ACPI: S3 HPET: Enabled EIST: Disabled Execute Bit: Enabled AHCI: Enabled Has anyone a idea why this KP happend: npvhash=4095 PAE enabled Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25 ~1/RELEASE_I386 vm_page_bootstrap: 767475 free pages and 18957 wired pages standart timeslicing quantum is 10000 us mig_table_max_displ = 73 panic(cpu 0 caller 0x2a6ac2): Kernel trap at 0x00508684, type 14=page fault, registers: CRO: 0x8001003b, CR2: 0xd2ee5fa7, CR3: 0x00101000, CR4: 0x000006f0 EAX: 0x6576206vc, EBX0x0099a000, ECX: 0x6576206c, EDX: 0x6d783f3c CR2: 0xd2ee5fa7, EBP: 0xc35fbe68, ESI: 0x05e9cd00, EDI : 0x00000625 EFL: 0x0001000g, EIP: 0x00508684, CS : 0x00000008, DS: 0x05ea0010 Error code: 0x00000002 Debugger called: <panic> Backtrace (CPU) 0), Frame : Return Addrss (4 potential args on stack) 0x3c5fbc68 : 0x21acfa (0x5ce650 0x3c5fbc9c 0x223156 0x0) 0x3c5fbcb8 : 0x2a6ac2 (0x590a50 0x508684 0xe ox590c1a) 0x3c5fbd98 : 0x29c968 (0x3c5fbdb8 0x5ea3b80 0x20000002 0x3c5fbe4c 0x3c5fbdb0 : 0x508684 (0xe 0x510048 0x5ea0000 0x20010) 0c3c5fbe68 : 0x502548 (0x5e9cd00 0x5ea2c20 0x5ea8ec0 0x5ea2c00) 0x3c5fbe88 : 0x88b91b (0x5ea2c20 0x5ea8ec0 0x4 0x0) 0x3c5fbee8 : 0x88cb28 0x88c19b 0x88c85c 0x533d75) 0x3c5fbf08 : 0x88bffa (0x88cb28 0x999000 0x1cd8048 0x5e9cd80) 0x3c5fbf28 : 0x52bc22 (0x5e9cd80 0x0 0x999000 0x1cd8048) 0x3c5fbf68 : 0x57349c (0x1ce5000 0x999000 0x1cd8048 0x0) 0x3c5fbfa8 : 0x22847d (0x0 0x41700500 0x44c7e0ff 0x84bbbc) 0x3c5fbfc8 : 0x29c68c (0x0 0xffffffff 0x4890845 0xe005e824) BSD process name correspondling to current thread: Unknown Mac OS version: Not yet set Kernel version: Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386 System uptime in nanoseconds: 360xxxxx I´m using an Original Snow Leopard DVD 1.6 Retail with this tut: http://www.insanelymac.com/2009/08/how-to-...-pc-hackintosh/ and those Kexts: http://cid-c7393a611e92b545.skydrive.live....x/Public/sl.zip http://www.gmxattachments.net/de/cgi/g.fcg...rame=attachment My HDD with Snow Leopard is in the first sata port plugged. Hardware: Mobo: MSI P35 Neo-F Cpu: Intel Core Duo E8200 @ 2.66 GHz Ram: 3x 1GB DDR SDRAM @ 667 MHz Graphics: Saphire Ati Radeon 4850x2 Thx & Greetz from Germany Link to comment Share on other sites More sharing options...
Limited87 Posted November 7, 2009 Share Posted November 7, 2009 Nice! How did you do to flash your mb? Start up in Windows an use this tool : http://www.ami.com/support/bios.cfm Also download a Modifiedbios. Greetz Link to comment Share on other sites More sharing options...
Recommended Posts