h BHATT Posted August 29, 2009 Share Posted August 29, 2009 Hardware: Main Bord intel d945gclf Hardware Overview: Model Name: Mac mini Model Identifier: Macmini2,1 Processor Name: Intel Atom Processor Speed: 1.69 GHz Number Of Processors: 1 Total Number Of Cores: 1 L2 Cache: 512 KB Memory: 1 GB Bus Speed: 533 MHz Boot ROM Version: MM21.009A.B00 Network: Built-in Serial Port (1): Type: PPP (PPPSerial) Hardware: Modem BSD Device Name: serial1 Has IP Assigned: No Ethernet Adaptor (en2): Type: Ethernet Hardware: Ethernet BSD Device Name: en2 Has IP Assigned: Yes Software: System Software Overview: System Version: Mac OS X 10.5.8 (9L31a) Kernel Version: Darwin 9.7.0 Graphics/Displays: Intel GMA 950: Chipset Model: GMA 950 Type: Display Bus: Built-In VRAM (Total): 64 MB of Shared System Memory Vendor: Intel (0x8086) Device ID: 0x2772 Revision ID: 0x0002 Displays: Display: Resolution: 1024 x 768 Depth: 32-Bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Memory: Memory Slots: ECC: Disabled CHAN A DIMM 0/J1MY: Size: 1 GB Type: DDR2 SDRAM Speed: 667 MHz Status: OK Manufacturer: Apple Inc. Part Number: ABCDEFGHIJ Serial-ATA: Serial-ATA Bus: MOSER BAER DH-22AAS: Model: MOSER BAER DH-22AAS Revision: DM71 Detachable Drive: No Protocol: atapi Unit Number: 0 Socket Type: Serial-ATA Power Off: No Async Notification: No Serial-ATA Bus: ST98823AS: Capacity: 74.53 GB Model: ST98823AS Revision: 7.24 Removable Media: No Detachable Drive: No BSD Name: disk0 Protocol: ata Unit Number: 0 Socket Type: Serial-ATA Mac OS 9 Drivers: No Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Verified Volumes: disk0s1: Capacity: 35.59 GB Available: 27.26 GB Writable: Yes File System: Journaled HFS+ disk0s2: Capacity: 38.94 GB Available: 38.89 GB Writable: Yes File System: HFS+ USB: USB High-Speed Bus: Host Controller Location: Built In USB Host Controller Driver: AppleUSBEHCI PCI Device ID: 0x27cc PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0xfd USB20 Camera: Product ID: 0x6270 Vendor ID: 0x0c45 (Sonix Technology Co., Ltd.) Version: 1.01 Speed: Up to 480 Mb/sec Location ID: 0xfd700000 Current Available (mA): 500 Current Required (mA): 500 USB Bus: Host Controller Location: Built In USB Host Controller Driver: AppleUSBUHCI PCI Device ID: 0x27c8 PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0x1d USB Bus: Host Controller Location: Built In USB Host Controller Driver: AppleUSBUHCI PCI Device ID: 0x27c9 PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0x3d USB Bus: Host Controller Location: Built In USB Host Controller Driver: AppleUSBUHCI PCI Device ID: 0x27cb PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0x7d Link to comment Share on other sites More sharing options...
morfy Posted August 29, 2009 Share Posted August 29, 2009 Important: 1) Disable HT from bios 2) Disable secondary ata. Try with chameleon rc1 + pc efi 10.1 (o .2). NB: Gma950 not support opencl. Link to comment Share on other sites More sharing options...
vincio3 Posted September 9, 2009 Share Posted September 9, 2009 Important:1) Disable HT from bios 2) Disable secondary ata. Try with chameleon rc1 + pc efi 10.1 (o .2). NB: Gma950 not support opencl. How to disable secondary ata in BIOS? I cannot find the setting... And using chameleon rc2 is ok? And how to put Efi 10.1 (o .2) in it? sorry...i'm going crazy with this mobo and SL... Link to comment Share on other sites More sharing options...
caiowa Posted September 9, 2009 Share Posted September 9, 2009 Take this: http://www.insanelymac.com/forum/index.php?showtopic=183751 And follow my bios setup in post #137 caiowa Link to comment Share on other sites More sharing options...
my2cents Posted December 30, 2009 Share Posted December 30, 2009 I too am attempting to load SL 10.6 onto this mobo... What I have been able to do so far is RUN 10.6.1 from my hdd pulled from a successful install on the Acer Aspire One AOA-150. *NOTE* You must boot in 32 bit mode, or you receive a KP ' unsupported CPU '. To do this, I must type "arch=i386" during Chameleon boot into 10.6. It seems that meklort might be working on a solution for 64 bit, as I read on his blog today. ( http://www.meklort.com/ ) I'm using a retail DVD of 10.6 for the install. Link to comment Share on other sites More sharing options...
my2cents Posted January 16, 2010 Share Posted January 16, 2010 I was finally successful with a fresh install of 10.6!!!! I used an older version of NBI, from mechdrew.com ( 10.6.1 auto install - 0.8.3 RC3 ) to boot. Very important: type in "arch=i386" before you boot into the SL install DVD. I had to hit F5 twice, before the SL dvd was a selection to boot from... Once you install SL and reboot the first time you MUST boot with "-x arch=i386". Complete the install and enjoy. Every time I boot up, i must type "arch=i386" or I get a kp. Hope this helps others Link to comment Share on other sites More sharing options...
mizar Posted July 17, 2010 Share Posted July 17, 2010 D945GCLF (bios 229) - 10.6.3 1. install 10.6.3 retail 2. Patched kernel Atom 10.3 ( http://www.insanelymac.com/forum/index.php...197020&st=0 ) 3. ChameleonRC3PCEFI10.5 4. fakesmc 5. EvoReboot 6. add in com.apple.boot.plist: <key>Kernel Flags</key> <string>arch=i386</string> install kexts from leo 10.5.6 7. R1000 8. GMA950 9. VoodooHDA Link to comment Share on other sites More sharing options...
Recommended Posts