Jump to content

Resolution for GMA X4500 easy way! + iWork 08 with NO QE/CI!


WinSucks_4ever
 Share

15 posts in this topic

Recommended Posts

Hi this Topic is for the guys who have a GMA X4500 and want to fix the resolution without difficult commands!.

The tutorial is very easy to understand!

The resolution works, but the QE/CI don't

This is just a temporary fix until we figure out how to make a stable driver

 

Heres the file and instructions!

Download Fix

;)

 

 

I wanna thank Tienneke, coldequation, and the guys of the forum.

 

Here is the picture!

 

Here is the Official GMA X4500 Forum

 

Hope it help!

 

PS: Make sure you have a file called "Boot" in your Startup volume!" Otherwise it wont work!

 

If you have a DualBoot, to Boot into another OS old the f8.png key! while you Boot!!

If you have any questions, post it!

I will answer!

1.tiff

Link to comment
Share on other sites

To iWork 08 (iWork 09 don't work!)

 

It's easy too and for those Graphics Cards who dosen't support Quartz Extreme, can run iWork08 too!

 

Its very easy, no kexts, only one command, and no Reboot!

 

Download This Image

 

1º Before install the patch, make sure you already have iWork installed!.

 

2º Folow the instructions on the image!.

 

Heres some pics!

 

PS: Numbers.app don't support! in the end you only can run Pages and Keynote 08!

post-322527-1251727564_thumb.png

post-322527-1251727570_thumb.png

post-322527-1251727585_thumb.png

Link to comment
Share on other sites

  • 2 weeks later...
I just installed this on my Dell inspiron 1545. Now for some reason my leopard would not boot anymore :S how do i revert this? or fix?

 

 

Witch version of chameleon do you have?

 

Well I hope you had a boot file backup!

 

Chameleon 2RC is not compatible!

 

If you have chamaleon 2RC u only need to add

 

graphics mode= yyyXyyyX32

 

Otherwise if u can't boot and u don't have a backut of your boot file, reinstall the OS!

Link to comment
Share on other sites

I am using the vista bootloader as I have a vista/mac osx dual boot, but it says Darwin Bootloader (Chameleon v1.0.12), when i select my OS

 

I just reinstalled mac os x now ;) lol

 

How would I get your fix to work?

 

I am using a Dell Inspiron 1545

Link to comment
Share on other sites

Hello,

I have a Dell Inspiron 1750.

I installed iDeneb 1.4 (10.5.6) and the resolution was 1024x768, then I applied your patch.

At first it did nothing.

I did the update 10.5.8 system, and hence the resolution was 1280x800. Better, of course, but I'd like to go to the native resolution of 1600x900. Is there a way to go beyond 1280x800?

Thank you for your reply.

Link to comment
Share on other sites

Ok For those how need an Higher Resolution then 1280x800, theres no Patch for the 15 inch Laptops!

But don't worrie!

Try this kexts,

PS This kexts are not mine

Any doubt post here or in the Official GMAX4500 Post!

I only made that patch for the 13 inch Laptops computers who need the Native Res.

More Info Here!

 

Remember this isn't my drivers!

Some peoples the mouse pointer has disapeared!

Others, when boot, after the Apple Logo had a Black Screen!

 

To Remove the kexts, in case if didn't work

U don't need to Reinstall the OS!

Link to comment
Share on other sites

Good news everyone

 

Mouse issue, and black screen as been solved!

 

now u can get 1600x900 res! yep

 

 

an quartzGL

 

no Quartz Extreme yet!

 

 

I WILL POST THE KEXTS

 

Ok here are the drivers

 

Install ALL OF THEN, UNCLUDED THOSE WHO DON'T HAVE .KEXT EXTENSIONS!!!!!

 

Then, use OSX86 Tools to Activate the Quartz!

 

Enjoy Download the Driver!

 

 

ps: for new guys who don't know how to install kexts drivers

 

post here I will anwser ! :D

Link to comment
Share on other sites

Hi this Topic is for the guys who have a GMA X4500 and want to fix the resolution without difficult commands!.

The tutorial is very easy to understand!

The resolution works, but the QE/CI don't

This is just a temporary fix until we figure out how to make a stable driver

 

Heres the file and instructions!

Download Fix

:P

 

 

I wanna thank Tienneke, coldequation, and the guys of the forum.

 

Here is the picture!

 

Here is the Official GMA X4500 Forum

 

Hope it help!

 

PS: Make sure you have a file called "Boot" in your Startup volume!" Otherwise it wont work!

 

If you have a DualBoot, to Boot into another OS old the f8.png key! while you Boot!!

If you have any questions, post it!

I will answer!

 

after reboot i see the desktop for one second or so and than it turns black. a external monitor is working. its a dell notebook with an x4500mhd. i tried ideneb, kalway and iatkos. any hints for me?

 

thanks in advance

Link to comment
Share on other sites

after reboot i see the desktop for one second or so and than it turns black. a external monitor is working. its a dell notebook with an x4500mhd. i tried ideneb, kalway and iatkos. any hints for me?

 

thanks in advance

 

 

My Sony VAIO is doing the exact same thing............... Any ideas??

 

Thanks.

Link to comment
Share on other sites

My Sony VAIO is doing the exact same thing............... Any ideas??

 

Thanks.

 

Delete de kext u installed!

 

u don't need to reinstall OS X Again!

 

just boot in -f -s -x

then

 

/sbin/mount -uw /

sudo rm -R /system/library/extensions/AppleIntelGMAX3100FB.kext

sudo rm -R /system/library/extensions/AppleIntelGMAX3100.kext

All the GMA X3100 Kext u can find!

 

to view the kexts in the extensions folder

type

ls -t

 

then reboot and boot with -f

 

telme de resolts!

 

The install ONLY THE GMAX3100FB.kext

of my kexts files!

 

Do not install the others!

 

Only AppleIntelGMAX3100FB.kext

 

reboot

Link to comment
Share on other sites

  • 2 weeks later...
Good news everyone

 

Mouse issue, and black screen as been solved!

 

now u can get 1600x900 res! yep

 

 

Hello,

I have a Dell Inspiron 1750.

I installed iDeneb 1.4 (10.5.6) and the resolution was 1024x768, then I used kexthelper to install only your

AppleIntelGMAX3100FB.kext

 

At the restart when moving to the right resolution, right after the passage of apple gray + white to blue, the screen turns off completely.

 

I got a screen for testing the VGA port :

 

it does not extinguish the display from the VGA output:

Instead it turns the external display in its native resolution!

... as if the display was extended desktop since I do not see the white bar from the top or the Doc

 

Pressing once on the F1 button (to switch display), display of the external display becomes totally unusable striatum.

 

Pressing a second time on the F1 button, the display screen turns off, the screen of the laptop internal lights but also totally useless striatum.

 

Surprisingly:

If I press F1 during startup (with the apple), the display of the internal display turns off, the screen turns on with the apple and this time it is the 'internal display that lights up with a two pixel is white. The display resolution is 1600x900, is used to text ... I amused myself in the Displays System Preferences to balance the white bar on the external screen and restarted. So, then, the external display is perfectly usable. I have access to all ...

 

What should I do now ?

Link to comment
Share on other sites

 Share

×
×
  • Create New...