exolize Posted August 25, 2009 Share Posted August 25, 2009 What should i do to make it work? Link to comment Share on other sites More sharing options...
SA22C Posted August 25, 2009 Share Posted August 25, 2009 What should i do to make it work? Same thing you did for Leopard, edit the kext to add the proper device id. Link to comment Share on other sites More sharing options...
jimmydigital00 Posted August 25, 2009 Share Posted August 25, 2009 Yes this is correct simply do the same thing you did with Leopard. If you are unaware of what that means check out MJ's guide to a retail Leopard installation. It gives you the steps you will need to do to get it working. Link to comment Share on other sites More sharing options...
MadGhost Posted August 26, 2009 Share Posted August 26, 2009 you can use this on vanilla install in E/E AppleYukon2Injector.kext.zip Link to comment Share on other sites More sharing options...
KariNeko Posted August 27, 2009 Share Posted August 27, 2009 you can use this on vanilla install in E/E AppleYukon2Injector.kext.zip Hi MadGhost, the zip you attached seems corrupt, could you upload it again? Thanks! Link to comment Share on other sites More sharing options...
Portos61 Posted August 28, 2009 Share Posted August 28, 2009 What should i do to make it work? Try this kext, for me it's ok. My mobo is Asus P5Q-E Bye IONetworkingFamily.kext.zip Link to comment Share on other sites More sharing options...
moarfish Posted August 28, 2009 Share Posted August 28, 2009 Try this kext, for me it's ok. My mobo is Asus P5Q-EBye IONetworkingFamily.kext.zip It works for my GA-965P-S3!! Thank you very much Link to comment Share on other sites More sharing options...
alexhardikk Posted August 29, 2009 Share Posted August 29, 2009 Hi. Any ideas for Yukon 88E8038 Ethernet with IOPCIFamily? ? ? Link to comment Share on other sites More sharing options...
og-phantom Posted August 31, 2009 Share Posted August 31, 2009 Hi MadGhost, the zip you attached seems corrupt, could you upload it again?Thanks! Try this injector. It works for me and have given it out to alot of people that all say it works too. YMMV tho. AppleYukon2Injector.kext.zip Link to comment Share on other sites More sharing options...
maciekish Posted September 8, 2009 Share Posted September 8, 2009 Try this injector. It works for me and have given it out to alot of people that all say it works too. YMMV tho. Thanks a bunch! Link to comment Share on other sites More sharing options...
factory Posted December 17, 2009 Share Posted December 17, 2009 Hi, I'm using Vanilla 10.6.2 with Yukon 88E8040T and i've tried this injector. This was the result: 1. AppleYukon2.kext is loaded 2. The card is recognized in System Profiler -> Hardware -> Ethernet Cards but without any name, just ethernet. After editing DSDT with the name, it shows correct. 3. In System Preferences -> Network the card is absent Could you tell me if someone could use this card and other possible kext's needed? Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts