Willy MAC Posted December 19, 2009 Share Posted December 19, 2009 Hello Willy!!, You may find it easier to use Netbook installer, and check the supported devices section for a more stable Snow leopard install. Plus so much easier!!. Check it out all!!!!! But my install is perfect now, the only boring thing is no webcam! Link to comment Share on other sites More sharing options...
zzrider Posted December 19, 2009 Share Posted December 19, 2009 Ok, little update- I used the Ralink RT73 kext file for a Belkin usb adapter I have. It works, but it is not ideal having to use a giant usb adapter for internet. Working: sound graphics drivers usb adapter wireless trackpad and keyboard volume and brightness controls Not working: built in wifi - NEED THIS webcam- no big deal ethernet- never use it anyway not sure if headset will work This computer I don't use much at all, I have an iMac and MacBook Pro, but this I use occasionally at work to diagnose network problems and run around with a laptop. Wifi is needed. Does anyone have suggestions? When I go to system preferences > network No devices are listed (except the usb adapter- listed as ethernet) But I can't get the Airport to show up. Please help, someone! Thanks edit- also get kernel panics when trying to mount disk images. (tried downloading chrome and when the dmg was mounted it froze up on me) sigh* Link to comment Share on other sites More sharing options...
zzrider Posted December 19, 2009 Share Posted December 19, 2009 Another update! Installed the seat belt kext and it fixed the dmg mounting problem. Did a lot of research and found a pkg that installs the correct drivers for my wifi card. It's a Broadcom 4312. After installing that the wifi works as well. As of now everything I need works. It's be nice to have the webcam work, but I probably wont use it often if ever. I get the message that my video card doesn't support photobooth. Haven't been able to test it elsewhere, yet. Is there a way to get the trackpad to support multi touch as it does in XP/Vista? That would be the icing on the cake... Link to comment Share on other sites More sharing options...
Willy MAC Posted December 19, 2009 Share Posted December 19, 2009 Did a lot of research and found a pkg that installs the correct drivers for my wifi card. It's a Broadcom 4312.After installing that the wifi works as well. You can use with this drivers the atheros Ar5007? Your troubles with Photobooth, seems like the "no QE/CI" Problem Link to comment Share on other sites More sharing options...
zzrider Posted December 20, 2009 Share Posted December 20, 2009 You can use with this drivers the atheros Ar5007? Your troubles with Photobooth, seems like the "no QE/CI" Problem I don't know what you're saying or asking in your first sentence... I enabled quartz, but read something about quartz extreme? Where would I get that if it is in fact what I need. The real pain in the ass I've noticed is that it won't wake up after going to sleep. A lot of times I'll put my laptops to sleep as apposed to a full shut down when I know I'll use it again in a little while. With this I have to either leave it on, or turn it off. I'd love a fix for this... Link to comment Share on other sites More sharing options...
Willy MAC Posted December 21, 2009 Share Posted December 21, 2009 I don't know what you're saying or asking in your first sentence... With the broadcom pkg you fully enabled the original built-in wireless module? Link to comment Share on other sites More sharing options...
zzrider Posted December 21, 2009 Share Posted December 21, 2009 With the broadcom pkg you fully enabled the original built-in wireless module? yea i found a download for it. for some reason I was only able to get it installed after installing the USB adapter. Once that installed the other worked too. Weird. But whatever works! Link to comment Share on other sites More sharing options...
randall_alfaro Posted January 7, 2010 Share Posted January 7, 2010 Nice guide, it works!!! . I was trying we the iDeneb 1.5 but i had a problem with the kernel panic, so.. we try with iDeneb 1.4 using your guide and it works now on my acer aspireone D250!!! tyvm vjrngn123 !!! Link to comment Share on other sites More sharing options...
knobsi Posted January 8, 2010 Share Posted January 8, 2010 hey guys me again, long time since i posted anything about this topic . any way i found this software/driver for atheros cards (for mac), but its just a 10 mintute trial. i dont hvae access to a hackintosh, so please follow the link below, download the software and let me know how it goes. hope this works!!! http://www.softplatz.com/Soft/Network-Inte...er-for-Mac.html Regards, vjrngn123 have somebody tried this driver for the atheros inside the D250? Link to comment Share on other sites More sharing options...
mastersilly Posted January 14, 2010 Share Posted January 14, 2010 isnt there a better way for acers then iatkos and ideneb? Link to comment Share on other sites More sharing options...
Constintinevamp Posted January 21, 2010 Share Posted January 21, 2010 oh im sorry i dint post that. u need to install a program called pacifist. then insert your iAtkos dvd. open up pacifist on click "open apple install discs" and select the iAtkos DVD. After it loads up(wait for a while,it could take some time), go into Drivers and extract the contents of intel GMA950x(or something like that,ull be able to no).Just extract the whole folder. Next, open up kexthelperb7(u should have installed it during the installation,if not same procedure for that also). Next,drag the contents of the extracted folder(GMA950) into kext helper. Next, enter your root password and click install. After it is done, restart your computer. And thats it. It should work!!! PS: Please post whether the install was a success. Because the intel atom n280 is single core but has 2 processors. Google it,u can read about it Its one SINGLE processor with hyper-threading(basically it has two seperate 32bit lines of cache or "threads" which under windows appears as a dual core would), so it shows as two, there is nothing dual core about it... Not to make you sound daft, but you cannot have two processors on a single core, how is that possible? Link to comment Share on other sites More sharing options...
Pongatron Posted February 10, 2010 Share Posted February 10, 2010 Howdy guys, Recently Hackintoshed the D250, just a few questions about wireless, (cant start a topic) Ok so i bought the Broadcom BCM4321 and plugged it into the Spare mini Pcie port at the bottom/back of the laptop, whatever you what to call it. I rewired one of my aerials from the standard half mini card by the speaker inside the card, and plugged it into the card in the PCI-e port. So now i has the questions. 1. How many aerials do i need to plug in, because i plugged in one and i cant either get or a signal or (carry on to question two) 2. Is there anything fancy i need to do here? Because when i plug the card into the PC, and boot it up. It comes up with Turn Airport on. I click away, but i still cant turn it on.... So main question is, Dodgy card? or am i going about this the wrong way. I will take photos tomorrow, i am capped at the moment.... took me ages to register *bumpage* anything? Link to comment Share on other sites More sharing options...
iannius Posted March 23, 2010 Share Posted March 23, 2010 OMG!Please help.Got the aod 250.Installed iatkos 10.5.7 v7 work perfect,no lags,no kernels. So,got some problems,with wi-fi and sound. Wi-fi,i've got BCM94312HMG,but not working,some Russian forums says that it work,but not on me. Tryed to find some kexts,result 0!Nothing.So please help,me! About sound,its realtek ALC272,intel 82801GBM.nothing found... I am not pro,its first time i am installing osx. Thanks for any help. Link to comment Share on other sites More sharing options...
pawelrx Posted April 6, 2010 Share Posted April 6, 2010 First of all, thanks for the guide vjrngn123 It worked out just as described. I installed it with help of a USB-stick using Chameleon as a boot-loader. I also have the iAktos V7 which I used to get the graphic card-driver as described. Didn't work. Thanks for the driverGMA950.pkg.zip colonelkernel8, that one worked perfectly. I enebled Quartz GL via OSX86tools, but QE is NOT active. Is it possible to make it work? This is very importentfor me cause now even Youtube lags. WIFI would be nice to, however I use Mobile Broadband via Telenor so it works there. But Quartz Extreme is important for me....anyone? And one more thing: Is there a Retail-way for AspireOne? Link to comment Share on other sites More sharing options...
Barq's Posted April 12, 2010 Share Posted April 12, 2010 Kneu Bee questions All through the forums there are lots of references to kexts and darwin, but I have not found anything that explains what they are. what are they?Is kext an acronym? if so what does it mean? Link to comment Share on other sites More sharing options...
aztec_knight Posted May 19, 2010 Share Posted May 19, 2010 Kneu Bee questions All through the forums there are lots of references to kexts and darwin, but I have not found anything that explains what they are. what are they?Is kext an acronym? if so what does it mean? I´d recomend that you look up those terms in Wikipedia if you want a really good explanation for those terms. you might as well want to know a bit about UNIX and the way it works. cheers, Link to comment Share on other sites More sharing options...
gilg2533 Posted June 25, 2010 Share Posted June 25, 2010 Just a heads up for people. I am currently running 10.6.4 with everything working except for bluetooth (havent tried it yet) and sleep. I have never gotten sleep to work on this machine under X period, it just reboots, however.... I recently found a kext that allows you to disable sleep completely on a lenovo site. Works great, when you shut the lid the display turns off and it resumes just fine, if anyone has had success with getting sleep to work please let me know!. Anyone needing the kext just google _DisableSleep.kext! Link to comment Share on other sites More sharing options...
joaquinmik Posted June 26, 2010 Share Posted June 26, 2010 Just a heads up for people. I am currently running 10.6.4 with everything working except for bluetooth (havent tried it yet) and sleep. I have never gotten sleep to work on this machine under X period, it just reboots, however.... I recently found a kext that allows you to disable sleep completely on a lenovo site. Works great, when you shut the lid the display turns off and it resumes just fine, if anyone has had success with getting sleep to work please let me know!. Anyone needing the kext just google _DisableSleep.kext! Hey gilg2533! Thanks for the info about the disablesleep, It's a really good option to the real sleep while We can find how make the sleep works. I have a question, What do you do to make the internal microphone work? I have everything working except Sleep and Microphone (My AOD250 Hasn't bluetooth). I will really appreciate your help! Regards! Link to comment Share on other sites More sharing options...
jhcarande Posted July 2, 2010 Share Posted July 2, 2010 If you upgrade your BIOS (www.acer.com) (v1.27) Wifi go up!!! (On acer aspire one d250) Link to comment Share on other sites More sharing options...
JrDsign Posted July 20, 2010 Share Posted July 20, 2010 How i get wifi (I update bios for 1.27, in S.I. no driver, jhcarande post your IO80211Family.kext or how you get wifi) and sleep for D250? I'm using Retail 10.6.4 and Chameleon RC5, sorry my english. Link to comment Share on other sites More sharing options...
dgeordgy21 Posted August 28, 2010 Share Posted August 28, 2010 here my kexts for 10.6.4. - No sleep, BCM4311 What's working: -wifi BCM4311 -webcam -cardreader -sound out put only -shutdown restart -video (except VGA) -multitouch touchpad -volume & brightness hotkeys http://www.filedropper.com/d2501064root Link to comment Share on other sites More sharing options...
johntriger Posted September 25, 2010 Share Posted September 25, 2010 here my kexts for 10.6.4. - No sleep, BCM4311 What's working: -wifi BCM4311 -webcam -cardreader -sound out put only -shutdown restart -video (except VGA) -multitouch touchpad -volume & brightness hotkeys http://www.filedropper.com/d2501064root could you please upload those kexts again Link to comment Share on other sites More sharing options...
Jeje742 Posted December 20, 2010 Share Posted December 20, 2010 Hello. I've got a problem ! After entering my Dvd player in the Bios, the computer restart and postering E_ and nothing displays.. Help me Please! If you can't understand what i'm saying, it's normal because i'm French Link to comment Share on other sites More sharing options...
engrkhawar Posted December 21, 2010 Share Posted December 21, 2010 "]Update i just install ideneb 1.4 on my acer aod250 and then install kext for ethernet from http://code.google.com/p/iats/ atheros AR8132 and it is working fine now i m in searching of wife kext .... Link to comment Share on other sites More sharing options...
Copycat Posted September 18, 2011 Share Posted September 18, 2011 Sorry for the necromancing. Here's a complete guide on how to install and get everything working on an AOD250 Link to comment Share on other sites More sharing options...
Recommended Posts