Sorry for a new topic but I'm confused :(

[dyme13]

I read the FAQ/Rules thread but I don't know what to post under...please forward me to the correct thread.

 

Anyway, this is what I have so far... my audio works through internal speakers but the headphones/mic do not work(are not recognized)

 

I have the following:

 

Codec: Conexant CX20561 (Hermosa)

Vendor Id : 0x14f15051

Subsystem Id : 0x103c30cd

 

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

 

And the following codec dump:

Codec: Conexant CX20561 (Hermosa)
Address: 0
Vendor Id: 0x14f15051
Subsystem Id: 0x103c30cd
Revision Id: 0x100000
Modem Function Group: 0x2
Default PCM:
 rates [0x160]: 44100 48000 96000
 bits [0xe]: 16 20 24
 formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
  Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0
  Amp-Out vals:  [0x2c 0x2c]
  Converter: stream=0, channel=0
  PCM:
 rates [0x560]: 44100 48000 96000 192000
 bits [0xe]: 16 20 24
 formats [0x1]: PCM
  Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
  Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0
  Amp-Out vals:  [0x4a 0x4a]
  Converter: stream=0, channel=0
  PCM:
 rates [0x560]: 44100 48000 96000 192000
 bits [0xe]: 16 20 24
 formats [0x1]: PCM
  Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x211: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  PCM:
 rates [0x160]: 44100 48000 96000
 bits [0xe]: 16 20 24
 formats [0x5]: PCM AC3
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
  Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
  Amp-Out vals:  [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0
  Amp-In vals:  [0x44 0x44] [0x44 0x44]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
 rates [0x160]: 44100 48000 96000
 bits [0xe]: 16 20 24
 formats [0x1]: PCM
  Power: setting=D0, actual=D0
  Connection: 2
  0x1d 0x17*
Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
  Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0
  Amp-In vals:  [0x44 0x44]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
 rates [0x160]: 44100 48000 96000
 bits [0xe]: 16 20 24
 formats [0x1]: PCM
  Power: setting=D0, actual=D0
  Connection: 1
  0x18
Node 0x16 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x0000001c: OUT HP Detect
  Pin Default 0x01214030: [Jack] HP Out at Ext Rear
 Conn = 1/8, Color = Green
 DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=37, enabled=1
  Power: setting=D0, actual=D0
  Connection: 2
  0x10* 0x11
Node 0x17 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Pincap 0x00001224: IN Detect
 Vref caps: 50 80
  Pin Default 0x01a19020: [Jack] Mic at Ext Rear
 Conn = 1/8, Color = Pink
 DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=38, enabled=1
  Power: setting=D0, actual=D0
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Pincap 0x00001224: IN Detect
 Vref caps: 50 80
  Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
 Conn = Unknown, Color = Unknown
 DefAssociation = 0xf, Sequence = 0x0
 Misc = NO_PRESENCE
  Pin-ctls: 0x24: IN VREF_80
  Unsolicited: tag=39, enabled=1
  Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
  Pincap 0x00000014: OUT Detect
  Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
 Conn = Unknown, Color = Unknown
 DefAssociation = 0xf, Sequence = 0x0
 Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Power: setting=D0, actual=D0
  Connection: 2
  0x10 0x11*
Node 0x1a [Pin Complex] wcaps 0x400501: Stereo
  Pincap 0x00010010: OUT EAPD
  EAPD 0x2: EAPD
  Pin Default 0x92170110: [Fixed] Speaker at Int Front
 Conn = Analog, Color = Unknown
 DefAssociation = 0x1, Sequence = 0x0
 Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Power: setting=D0, actual=D0
  Connection: 2
  0x10* 0x11
Node 0x1b [Pin Complex] wcaps 0x400500: Mono
  Pincap 0x00010010: OUT EAPD
  EAPD 0x2: EAPD
  Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
 Conn = Unknown, Color = Unknown
 DefAssociation = 0xf, Sequence = 0x0
 Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Power: setting=D0, actual=D0
  Connection: 2
  0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400701: Stereo Digital
  Pincap 0x00000010: OUT
  Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
 Conn = Unknown, Color = Unknown
 DefAssociation = 0xf, Sequence = 0x0
 Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Power: setting=D0, actual=D0
  Connection: 1
  0x12
Node 0x1d [Pin Complex] wcaps 0x40040b: Stereo Amp-In
  Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
  Amp-In vals:  [0x03 0x03]
  Pincap 0x00000020: IN
  Pin Default 0x400001f0: [N/A] Line Out at Ext N/A
 Conn = Unknown, Color = Unknown
 DefAssociation = 0xf, Sequence = 0x0
 Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Power: setting=D0, actual=D0
Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono

 

 

Please help!