Nexos™ Posted June 13, 2009 Share Posted June 13, 2009 Hi, ich wollte mal fragen wie das mit den Modifizierten Treibern unter Snow Leopard läuft. 1. kann man einfach die von Leopard nehmen? 2. wenn ja gibs dann keine probleme wegen dem 64 bit kernel? mfg Nexos™ Link to comment Share on other sites More sharing options...
-=n3rd=- Posted June 13, 2009 Share Posted June 13, 2009 Hi, ich wollte mal fragen wie das mit den Modifizierten Treibern unter Snow Leopard läuft. 1. kann man einfach die von Leopard nehmen? 2. wenn ja gibs dann keine probleme wegen dem 64 bit kernel? mfg Nexos™ 1.) Kann man, um allerdings alle Performance-Vorteile zu erhalten und ein vollständig auf 64 Bit laufendes System zu booten (bootparameter -x64) musst du auch 64 Bit kexte haben. 2.) nicht, wenn du ohne -x64 bootest, dann verhält sich alles normal.. dann ist allerdings der Performancevorteil zu Leopard fast gen Null.... zumindest bei mir. In 64 Bit - warum auch immer - rockt das ding... Rational find ich das ganze nicht umbedingt. Link to comment Share on other sites More sharing options...
Nexos™ Posted June 13, 2009 Author Share Posted June 13, 2009 Wo bekomme ich 64 bit kexte ich habe 2 boards die ich ausprobieren will 1. Asus P5n 32 e sli plus | da siehtaber warscheinlich sehr schlecht aus wegen dem nvidia chipsatz 2. Gigabyte GA-ep35-ds4 Welches board nutzt du Link to comment Share on other sites More sharing options...
-=n3rd=- Posted June 14, 2009 Share Posted June 14, 2009 Wo bekomme ich 64 bit kexte ich habe 2 boards die ich ausprobieren will 1. Asus P5n 32 e sli plus | da siehtaber warscheinlich sehr schlecht aus wegen dem nvidia chipsatz 2. Gigabyte GA-ep35-ds4 Welches board nutzt du GA-EG31M-S2 G31 Express Chipset - AHCI Generic Brauche exactly zwei Kexte für den Spaß - einmal den Decrypter, musst mal sehn wo du den herbekommst, und noch voodoohda + nen EFI-String für meine Graka Sleep und Shutdown funktionieren noch nicht richtig, OpenHaltRestart wird merkwürdigerweise nicht geladen - denke auch ne 32 bit Kext... Abwarten ist die devise. Greets Link to comment Share on other sites More sharing options...
riws Posted June 15, 2009 Share Posted June 15, 2009 Welche 64bit Kexte brauchste? dsmos, smbios? Link to comment Share on other sites More sharing options...
constil Posted June 15, 2009 Share Posted June 15, 2009 Welche 64bit Kexte brauchste? dsmos, smbios? Hallo riws, hast du die Kexte? darf ich die auch haben ? Link to comment Share on other sites More sharing options...
Nexos™ Posted June 15, 2009 Author Share Posted June 15, 2009 dsmos, Disabler(da kann ich gleubich aber auch die alte nehmen), SMBIOSEnabler, OpenHaltRestart, LegacyJMicronATA, LegacyIOAHCIBlockStorage, LegacyHDAPlatformDriver, LegacyHDAController, LegacyAppleIntelPIIXATA, LegacyAppleAHCIPort, HDAEnabler NVDawin256 Link to comment Share on other sites More sharing options...
Nexos™ Posted June 16, 2009 Author Share Posted June 16, 2009 Hi im letzten Post wird gesagt das Chameleon 2 nicht funktioniert, warum? Chameleon 2 ist doch viel weiterentwickelter als Chameleon 1 Quote:Originally Posted by xXrkidXx will PC-EFI 9 mess with Chameleon 2.0? Nope, shouldn't do @B666: The cause of the boot freeze on non-vanilla systems is DmitriK's Legacy kernel causing the problem, unfortunately it has not been fixed yet. @Drbee: That is just weird. I am able to boot both Snow Leo, and Leo on the same HDD. I'm sorry I do not know a fix for that mfg Nexos Link to comment Share on other sites More sharing options...
riws Posted June 16, 2009 Share Posted June 16, 2009 Hi im letzten Post wird gesagt das Chameleon 2 nicht funktioniert, warum?Chameleon 2 ist doch viel weiterentwickelter als Chameleon 1 mfg Nexos Ist ja, aber SnowLeo braucht extra Funktionen, die in Chameleon 2 nicht vorhanden sind. Und die notwendige boot Datei ist mit Chameleon 2 nicht kompatibel. Link to comment Share on other sites More sharing options...
04152viki Posted June 16, 2009 Share Posted June 16, 2009 Hi im letzten Post wird gesagt das Chameleon 2 nicht funktioniert, warum?Chameleon 2 ist doch viel weiterentwickelter als Chameleon 1 mfg Nexos Nur Netkas PCEFI 9 v4 Vanilla geht nicht ohne DSDT Sound+Grafik besser in DSDT integrieren VoodooPower geht auch (32 bit getestet) shutdown/restart/sleep Bei jedem Neustart werden Bioseinstellungen zurückgesetzt 64 bit Modus problematisch. P.S. Rechte reparieren und kexte installieren: http://www.insanelymac.com/forum/index.php?showtopic=140647 Link to comment Share on other sites More sharing options...
Nexos™ Posted June 16, 2009 Author Share Posted June 16, 2009 Hi dsdt ist ja nen ersatz für gepatchte kexte oder? verändert dsdt die Biso Filmware? Link to comment Share on other sites More sharing options...
04152viki Posted June 16, 2009 Share Posted June 16, 2009 Hi dsdt ist ja nen ersatz für gepatchte kexte oder?verändert dsdt die Biso Filmware? DSDT verändert nichts an Hardware, das ist nur für OS wichtig und das kann auch alle Injectoren oder String ersetzen, nicht die Treiber (gepatchte kexte). Link to comment Share on other sites More sharing options...
riws Posted June 16, 2009 Share Posted June 16, 2009 Gut also es läuft immer noch nicht habe folgendes ausprobiert: http://www.infinitemac.com/f57/how-to-inst...-on-a-pc-t3137/ 1. Efi V9 installiert 2. boot datein auf die festplatte kopiert 3. Snow Leopard Installiert 4. dsmos und disabler kexte installiert erster boot versuch auf mehren boards 5. denn dort verlinkten gepatched kernel raufkopiert zweiter boot versuch auf beiden boards hier ein bild vom verbose mod: ich kann hier nicht viel erkennen gibs nen boot parameter der OSX im -x86 modus bootet -86 oder -x32 funkioniert nicht mfg Nexos Vanilla ging bei dir nicht? Hab selber auch jetzt den letzten drauf installiert, ging wie die früheren ohne Probleme, nur Sound fehlt noch. In 64bit Modus kann ich auch booten, nur dann fehlt die Graka mit Beschleunigung, Intel X3100 Ist wohl noch nicht voll 64bit die Treiber von dem, da es beim Booten so einiges über die Treiber jammert. Link to comment Share on other sites More sharing options...
04152viki Posted June 17, 2009 Share Posted June 17, 2009 Gut also es läuft immer noch nicht habe folgendes ausprobiert: http://www.infinitemac.com/f57/how-to-inst...-on-a-pc-t3137/ 1. Efi V9 installiert 2. boot datein auf die festplatte kopiert 3. Snow Leopard Installiert 4. dsmos und disabler kexte installiert erster boot versuch auf mehren boards 5. denn dort verlinkten gepatched kernel raufkopiert zweiter boot versuch auf beiden boards hier ein bild vom verbose mod: ich kann hier nicht viel erkennen gibs nen boot parameter der OSX im -x86 modus bootet -86 oder -x32 funkioniert nicht mfg Nexos Wie hast du kexte installiert? dsmos+disabler lieber in /Extra/Extensions/ Link to comment Share on other sites More sharing options...
Hugo_bee Posted June 17, 2009 Share Posted June 17, 2009 sorry but without EFI guid partition you should have always that problem Link to comment Share on other sites More sharing options...
Nexos™ Posted June 18, 2009 Author Share Posted June 18, 2009 dsmos + disabler sind im osx extentions ordner und im extra/Extentions ordner weder mit vanilla noch mit gepatchtem kernel läufts das foto sieht auf beiden kerneln gleich aus. ich habe noch einen disabler und dsmos aus leopard kann ich die nicht verwenden dort lauft leopard perfekt auf retail mit original apple kernel ps: das was die in der Anleitung verwendet wird ist chameleon v1.0... soll ich EFI V9 von netkas nehmen ps2: gibs auch ne methode das ich die disk so wie bei leopard mit boot132 boote und dann installiere? mfg Nexos @ugokind in the tutorial is written i should use Chameleon 1 with other boot file the hdd is a guid partition Link to comment Share on other sites More sharing options...
riws Posted June 19, 2009 Share Posted June 19, 2009 Du musst den PC_EFI v9 von netkas installieren und den extra SnowLeo boot Datei auf die selbe Partition kopieren. Leopard bootet auch mit der boot Datei ohne Probleme. Link to comment Share on other sites More sharing options...
Nexos™ Posted June 20, 2009 Author Share Posted June 20, 2009 ich hab jetzt netkas EFI V9 installiert die SnowLeo Boot datei auf /root kopiert hab die disabler und dsmos kext in extra/extensions kopiert und mit osx86 tools von PC WIZ installiert hier sind die daten: mfg Nexos™ ps: müssen irgendwelche string hinzugefügt werden wenn ja welche Link to comment Share on other sites More sharing options...
riws Posted June 20, 2009 Share Posted June 20, 2009 ich hab jetzt netkas EFI V9 installiert die SnowLeo Boot datei auf /root kopierthab die disabler und dsmos kext in extra/extensions kopiert und mit osx86 tools von PC WIZ installiert hier sind die daten: mfg Nexos™ ps: müssen irgendwelche string hinzugefügt werden wenn ja welche Probiert, dass die 2 kexte nur in SnowL /System/Library/Extensions/ sind? Rechte fix mal manuell selber in Terminal. Strings sind ja sehr abhängig vom konkreten PC, ich selber hab nix eingetragen. Link to comment Share on other sites More sharing options...
Nexos™ Posted June 20, 2009 Author Share Posted June 20, 2009 So hab jetzt die kexte von hand installiert und mit folgenden parametern gebootet: -v -f -x64 "Graphics Mode"="1920x1200x32" Das gibt er dann aus: npvhash=4095 Darwin Kernel Version 10.0.0b1: Fri May 29 00:01:05 PDS 2009; root:xnu-1456~1/RELEASE_X86_64 vm_page_bootstrap: 961023 free pages and 87553 wired pages kext submap [0xffffff7f80600000 - 0xffffff8000000000], kernel text [0xffffff7f8000200000 - 0xffffff8000000000] standard timeslicing quantum is 10000 us mig_tabel_max_displ = 73 Error - kext net.osrom.kext.Diabler declares com.apple.kernel dependencies. Only com.apple.kpi.* dependencies are supported for 64-bit kexts. Can't load kext net.osrom.kext.Disabler - failed to resolve library dependencies. Kext net.osrom.kext.Disabler failed to load (0xdc00800e). kxld[com.apple.dsmod]: The following symbols are unresolved for this kext: kxld[com.apple.dsmod]: _OSRuntimeFinalizeCPP kxld[com.apple.dsmod]: _OSRuntimeInitializeCPP Can't load kext com.apple.dsmod. Failed to load executable for kext com.apple.dsmos. Kext com.apple.dsmos failed to load (0xdc008016). Failed to load kext com.apple.dsmod (error 0xdc008016). Couldn't alloc class "Disabler" Couldn't alloc class "com_apple_dsmos" devfs_make_node: not ready for devices! panic(cpu 0 caller 0xffffff7f80662958): "CPU 0 has no HPET assigned to it"@/SourceCache/AppleIntelCPUPowerManagement/AppleIntelCPUPowerManagement-84/pmThread.c:103 Debugger called: <panic> Backtrace (CPU 0), Frame : Return Address 0xffffff8059023e50 : 0xffffff8000204ae6 0xffffff8059023f50 : 0xffffff7f80662958 0xffffff8059023fa0 : 0xffffff80002c3ba7 Kernel Extensions in backtrace (with dependencies): com.apple.driver.AppleIntelCPUPowerManagement(84.0.0)@0xffffff7f0065a000->0xffffff7f00679fff BSD Process name corresponding to current thread: Unknown Mac OS version: Not yet set Kernel version: Darwin Kernel Version 10.0.0b1: Fri May 29 00:01:05 PDT 209; root:xnu-1456~1/RELEASE_X86_64 System uptime in nanoseconds: 22631833806 Ich glaube er nimmt die dsmos und Disabler kext nicht an was mein ihr mfg Nexos™ Link to comment Share on other sites More sharing options...
04152viki Posted June 20, 2009 Share Posted June 20, 2009 Starte doch nur mit -v -f Link to comment Share on other sites More sharing options...
Nexos™ Posted June 20, 2009 Author Share Posted June 20, 2009 funktioniert auch nicht Link to comment Share on other sites More sharing options...
riws Posted June 20, 2009 Share Posted June 20, 2009 Wie steht es mit DSDT.aml, steht es auf der Partition, wo du den Bootloader startest? Link to comment Share on other sites More sharing options...
Nexos™ Posted June 20, 2009 Author Share Posted June 20, 2009 mit DSDT hab ich noch nichts gemacht ich habs jetzt einafch so angewandt: es läuft aber immer noch nicht Foto: muss ich bei DSDT Patcher noch irgendetwas anderes auswählen ps: nutze eine eigene festplatte für Snow Leopard Bootloader ist auch auf dieser installiert so wie jetzt auch dsdt Link to comment Share on other sites More sharing options...
riws Posted June 20, 2009 Share Posted June 20, 2009 Mhh, lösch mal den, oder beweg aus, den blöden AppleIntelCPUPowerManagement. Link to comment Share on other sites More sharing options...
Recommended Posts