jateshk Posted March 26, 2009 Share Posted March 26, 2009 Here is my hardware GIGABYTE GA-G31M-ES2L LGA 775 Intel G31 Micro ATX Intel Motherboard - Retail G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ - Retail Item #: N82E16820231122Intel Pentium E5300 2.6GHz LGA 775 65W Dual-Core Processor Model BX80571E5300 - Retail ASUS EN8400GS SILENT/HTP/256M GeForce 8400 GS 256MB 64-bit GDDR2 PCI Express x16 HDCP Ready Video Card - Retail SAMSUNG Spinpoint F1 HD103UJ 1TB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM Item #: N82E16822152102Sony Optiarc 22X DVD±R DVD Burner Black SATA Model AD-7220S - OEM Item #: N82E16827118023Rosewill R512 BK Black Ultra High Gloss Finished Steel MicroATX Mid Tower Computer Case with 400W Power Supply - Retail at $400 right now for everything. So my question is...whats the BEST way to install this? These are the instruction i have A PC with Intel Core Processors and Chipset (AMD is not supported). <li>A retail Mac OS X DVD Installer Download Click here or Buy Click here. <li>Download the Chameleon for Hard Disk here. <li>Download the Boot-132 Generic ISO here. If don’t works than download the more modified version. <li>Download Boot-132 ISO with modified kexts here. Now where do i get the kexts for the motherboard? How do i install them? Is there a even NOOB tutorial for it all? Link to comment Share on other sites More sharing options...
roowan Posted March 27, 2009 Share Posted March 27, 2009 it should work very good with iPC 10.5.6 and you even don't need to select any kext, as far you don't need the ethernet. The graphiccard can be set up later with adding efi-strings. You can try to install the sound via iPC and select alc883 or do it later via taruga dump patcher Link to comment Share on other sites More sharing options...
Recommended Posts