klolwut Posted March 2, 2009 Share Posted March 2, 2009 Hello, I searched alot about this, but I can't find a driver for it. I guess no one made it yet, but my resolution is stuck at 1024x768 and I desperately need this driver. Can someone help me please? My screen's resolution is 1920x1024 Link to comment Share on other sites More sharing options...
Synaesthesia Posted March 2, 2009 Share Posted March 2, 2009 There might be some hope now that the 4850/4870 works. Just wait a little and see if that yields fruit. Link to comment Share on other sites More sharing options...
cybland Posted March 2, 2009 Share Posted March 2, 2009 Newest Natit.kext from netkas has support for HD46xx cards but there is still no report from users. If you feeling up to it you can try it out. What you need is drivers from here. Install and check for your dev-id in ATIRadeonX2000.kext. Please report your findings. Edit: outis has just reported in #radeonhd on irc that this drivers don't work with HD4670. Link to comment Share on other sites More sharing options...
klolwut Posted March 3, 2009 Author Share Posted March 3, 2009 I installed it and didnt find my dev ID in the kext, when I restarted there was no screen signal to my monitor, so had to delete the kexts. I guess I'll have to wait x.x Link to comment Share on other sites More sharing options...
cybland Posted March 3, 2009 Share Posted March 3, 2009 I installed it and didnt find my dev ID in the kext, when I restarted there was no screen signal to my monitor, so had to delete the kexts. I guess I'll have to wait x.x If your dev-id is not in ATIRadeonX2000.kext you have to add it. Also try switching output ports on your card. Users that have HD4870 have to plug DVI to VGA adapter to DVI1 port and connect monitor to DVI2 to get signal (just adapter in one port and monitor in other) and users of HD4850 can only use DVI2 to connect monitor so you have to experiment with all imaginable combinations to see if any will work. Link to comment Share on other sites More sharing options...
rahil Posted March 4, 2009 Share Posted March 4, 2009 With my 4670, I can install kexts and qe/ci works, but there is no output to monitor (I have tried both ports)....Also, qe/ci only work if dvi2vga is plugged in to port 1(closest to mobo) Link to comment Share on other sites More sharing options...
cybland Posted March 4, 2009 Share Posted March 4, 2009 With my 4670, I can install kexts and qe/ci works, but there is no output to monitor (I have tried both ports)....Also, qe/ci only work if dvi2vga is plugged in to port 1(closest to mobo) That's too bad. Hopefully things will be better with release of final 10.5.7 update. Link to comment Share on other sites More sharing options...
klolwut Posted March 4, 2009 Author Share Posted March 4, 2009 If your dev-id is not in ATIRadeonX2000.kext you have to add it. Also try switching output ports on your card. Users that have HD4870 have to plug DVI to VGA adapter to DVI1 port and connect monitor to DVI2 to get signal (just adapter in one port and monitor in other) and users of HD4850 can only use DVI2 to connect monitor so you have to experiment with all imaginable combinations to see if any will work. I added my devID, rebooted, no signal. Tried all combinations. Still. Hmmm.. Link to comment Share on other sites More sharing options...
rahil Posted March 5, 2009 Share Posted March 5, 2009 I added my devID, rebooted, no signal. Tried all combinations. Still. Hmmm.. VNC or SSH in to your mac and see if you can change resolution and if you have qe/ci....If you ssh, the command you want to use is just "system_profiler" without quotes. Link to comment Share on other sites More sharing options...
Recommended Posts