totobaumi Posted April 18, 2006 Share Posted April 18, 2006 Hi, i took the sources from: http://gtdriver.binaervarianz.de/ out of the svn: https://svn.binaervarianz.de/kismac/ Then changed the firmware upload to little Endian and it works. The intel dmg can be found here: http://osx.totosoft.de/GTDriver.dmg Greetings Thorsten Link to comment Share on other sites More sharing options...
cyclonefr Posted April 18, 2006 Share Posted April 18, 2006 great but for which Wifi ? Link to comment Share on other sites More sharing options...
mortis Posted April 18, 2006 Share Posted April 18, 2006 Great! could you do something similar for prism2/2.5? there are drivers in the kismac site, (USBIntersilJack) and its SVN repository Link to comment Share on other sites More sharing options...
alberto Posted April 19, 2006 Share Posted April 19, 2006 Great job!!!!!! I will try to test it tonight! Link to comment Share on other sites More sharing options...
mcflemp Posted April 20, 2006 Share Posted April 20, 2006 Can confirm it is working on my miniPCI Prism II wlan device! (manufacturer unknown, came with the laptop and never took it apart) had some strange behaviour at first, the window that asks for the network name and password popped up a couple of times although I was already connected. That disappeared though and everything seems to work flawlessy now Link to comment Share on other sites More sharing options...
absolut Posted April 23, 2006 Share Posted April 23, 2006 Could someone host the file somewhere else? The server doesnt seem to work. Alternatively, send to to my email kenneth(at)htgk.org and ill put it on my idisk. Link to comment Share on other sites More sharing options...
mortis Posted April 24, 2006 Share Posted April 24, 2006 as presumed..... not working on my prism2.5 usb dwl-122 Link to comment Share on other sites More sharing options...
munky Posted April 24, 2006 Share Posted April 24, 2006 can i just ask... does this driver make the card appear to be an Airport card? ie can I use the built-in wireless menu stuff, or do i need to use something else to configure the card? Link to comment Share on other sites More sharing options...
sniperviper Posted April 24, 2006 Share Posted April 24, 2006 i have installed this driver with success, but whenever i will try to enter my network password (wep) my entry will be resetted. what went wrong????? please help Link to comment Share on other sites More sharing options...
autoy Posted April 24, 2006 Share Posted April 24, 2006 Please fill all your tested drivers in the wiki! http://wiki.osx86project.org/wiki/index.php/3rdPartyDrivers Thnx Link to comment Share on other sites More sharing options...
YoMuS Posted April 25, 2006 Share Posted April 25, 2006 Hi!, I've just installed JaS 10.4.6 version. I mount the dmg image, and appears two scripts, install.command and uninstall.command. I press install, and the terminal asks me for the root password. I put it on, and it says that kext successfully loaded, and that the configuration program is opening, but... nothing happens...why? I have a SMC 2835W Cardbus with the Intersil PRISM GT chipset... anyone knows what happens?? Many Thanks!!! Link to comment Share on other sites More sharing options...
oguz Posted April 27, 2006 Share Posted April 27, 2006 hi, this driver works perfect with a WG511 (PrismGT) Link to comment Share on other sites More sharing options...
YoMuS Posted April 28, 2006 Share Posted April 28, 2006 oguz, which is your macosx version? 10.4.5? I think it doesn't run on my laptop because of the 10.4.6... Link to comment Share on other sites More sharing options...
Caronte Posted April 30, 2006 Share Posted April 30, 2006 hi, this driver works perfect with a WG511 (PrismGT) I also own a WG511 Prism GT, but it seems that the cardbus isn't well managed by the kernel, therefore i can't load the driver: IOPCCard notice: AdjustResourceInfo: Bad size IOPCCardBridge::start failed Trying to install the GTDriver throws: ++++ Installing Driver ++++ 14WiFiController is not compatible with its superclass, 20IOEthernetController superclass changed? kextload: a link/load error occured for kernel extension /System/Library/Extensions/GTDriver.kext load failed for extension /System/Library/Extensions/GTDriver.kext (run kextload with -t for diagnostic output) ------- #lspci -v 02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (rev 32) Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10002000 (32-bit, non-prefetchable) Bus: primary=02, secondary=03, subordinate=06, sec-latency=0 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Link to comment Share on other sites More sharing options...
kalle_19 Posted May 8, 2006 Share Posted May 8, 2006 Can you describe, in detail, how you changed the firmware upload to little Endian, please? Maybe someone can port http://wirelessdriver.sourceforge.net/ It would be nice if it worked for ORiNOCO cards, like compaq wl110 Link to comment Share on other sites More sharing options...
oguz Posted May 8, 2006 Share Posted May 8, 2006 oguz, which is your macosx version? 10.4.5? I think it doesn't run on my laptop because of the 10.4.6... Hi, im running 10.4.6. Installed 10.4.5, updated to 10.4.6. i have downloaded this: http://binaervarianz.de/downloads.php?acti...http&file_id=35 (GTDriver.093.dmg) than install it, reboot and osx is showing you wlan have fun Link to comment Share on other sites More sharing options...
kalle_19 Posted May 10, 2006 Share Posted May 10, 2006 I am trying to connect to cvs.wirelessdriver.sf.net now. Is the CVS server down, or is it just me? Would be fun to try to comp. in x86... Link to comment Share on other sites More sharing options...
oscarcar Posted June 2, 2006 Share Posted June 2, 2006 somebody has solved this error? Trying to install the GTDriver throws: ++++ Installing Driver ++++ 14WiFiController is not compatible with its superclass, 20IOEthernetController superclass changed? kextload: a link/load error occured for kernel extension /System/Library/Extensions/GTDriver.kext load failed for extension /System/Library/Extensions/GTDriver.kext (run kextload with -t for diagnostic output) thx Link to comment Share on other sites More sharing options...
Caronte Posted July 20, 2006 Share Posted July 20, 2006 Can anybody repost links to the driver? Link to comment Share on other sites More sharing options...
munky Posted August 13, 2006 Share Posted August 13, 2006 http://www.totosoft.de/GTDriver.dmg is the new location of the driver thanks toto Link to comment Share on other sites More sharing options...
Caronte Posted August 23, 2006 Share Posted August 23, 2006 http://www.totosoft.de/GTDriver.dmg is the new location of the driver thanks toto Not Found The requested URL /thorsten.baumhoefer/totosoft/GTDriver.dmg was not found on this server. Link to comment Share on other sites More sharing options...
dublea Posted August 27, 2006 Share Posted August 27, 2006 Can you prepost this DRM file... the download will not work! Link to comment Share on other sites More sharing options...
HappyDenn Posted September 26, 2006 Share Posted September 26, 2006 Hmm I know this post has been a while, but the link above doesn't work anymore anyone has this driver and is willing to share? the binary provided on GTDriver's homepage is for PPC platform I think... and the person who did this driver said it's compiled for Intel Thanks. Link to comment Share on other sites More sharing options...
totobaumi Posted September 27, 2006 Author Share Posted September 27, 2006 Sorry, first I had no Internet access and then I haven't looked into this forum. I've uploaded it again: http://osx.totosoft.de/GTDriver.dmg (maybe it takes some time, because i just created the subdomain) But it was really only one line of code I've changed so thank the binaervarianz.de guys for this piece of software. Greetings, Thorsten Link to comment Share on other sites More sharing options...
kidgoo Posted September 28, 2006 Share Posted September 28, 2006 But it was really only one line of code I've changed so thank the binaervarianz.de guys for this piece of software. Thanks... Out of curiosity, could you post the source / patch of your changes? Link to comment Share on other sites More sharing options...
Recommended Posts