VampireMI2 Posted February 17, 2009 Share Posted February 17, 2009 I have ASUS P5GC-MX/1333 with Attansic L2 lan card onboard, everything work great only Ethernet, but I try modify info.plist in Attansic L1 kext but it's not work . Have some kext or how to make it work? Thank very much. Link to comment Share on other sites More sharing options...
reader02 Posted February 18, 2009 Share Posted February 18, 2009 Now in the debugging, tx frame should not send。 AttansicL2Ethernet090219.kext.zip Link to comment Share on other sites More sharing options...
snetsplit Posted February 18, 2009 Share Posted February 18, 2009 Sweet I have that same motherboard and been trying to get the lan working for like the last week! Thank you very much! Link to comment Share on other sites More sharing options...
vampaz Posted February 19, 2009 Share Posted February 19, 2009 I'm getting the famous problem "Ethernet Adaptor (en1) has a self-assigned IP address and may not be able to connect." Tried manual ip config and no network. Is this working for you? Link to comment Share on other sites More sharing options...
reader02 Posted February 22, 2009 Share Posted February 22, 2009 It can get the IP address , but can't work。 AttansicL2Ethernet090222.kext.zip Link to comment Share on other sites More sharing options...
reader02 Posted February 23, 2009 Share Posted February 23, 2009 Ping test successfully, but can't work. AttansicL2Ethernet090223.kext.zip Link to comment Share on other sites More sharing options...
reader02 Posted February 24, 2009 Share Posted February 24, 2009 It's working on leopard 10.5.2 . The latest version at here : http://www.insanelymac.com/forum/index.php...d=1125350 AttansicL2Ethernet090224.kext.zip Link to comment Share on other sites More sharing options...
vampaz Posted February 24, 2009 Share Posted February 24, 2009 It's working for leopard 10.5.2 . Working in ipc 10.5.6.. Thank you very much men, Kudos for you. If you where in Lisbon i would pay 5 beers to you... But itunes craches, here is the crash report , maybe it helps. itunes_crashes.rtf Link to comment Share on other sites More sharing options...
vampaz Posted February 26, 2009 Share Posted February 26, 2009 Sorry,it was a problem of my setup, working 100% now Link to comment Share on other sites More sharing options...
eberts Posted March 14, 2009 Share Posted March 14, 2009 Thanks reader02! It works here but not after sleep. It reports everything is ok, cable connected but no ping to the router. I wonder if we could adjust anything in dsdt (I already injected the device, changed to built-in=yes). Where's the source code for it? Thx a million eberts Link to comment Share on other sites More sharing options...
reader02 Posted March 17, 2009 Share Posted March 17, 2009 It works here but not after sleep see here: http://www.insanelymac.com/forum/index.php...mp;#entry827504 Link to comment Share on other sites More sharing options...
eberts Posted March 17, 2009 Share Posted March 17, 2009 Thanks reader02, that's some kind of work around but it would be nice to have a fixed driver for hibernate. Maybe we can compare the code to the linux driver delivered by asus. Several lines in there can be spotted to put the device to sleep and waking it up again. Link to comment Share on other sites More sharing options...
BOBacious Posted March 19, 2009 Share Posted March 19, 2009 see here:http://www.insanelymac.com/forum/index.php...mp;#entry827504 Works on my asus p5gc-mx, great effort on the author's part to get this chip compatible with OSX86. So far its great for surfing and internet stuff, but is really slow when filesharing and in a home network setting, about ten times slower, I had to go back to a the 8139. Hope this info helps with debugging. cheers! Link to comment Share on other sites More sharing options...
Thacker Posted March 19, 2009 Share Posted March 19, 2009 Coool! Thank you, man!!! Link to comment Share on other sites More sharing options...
auqs10 Posted March 20, 2009 Share Posted March 20, 2009 Hi reader02, works fine under Leo 10.5.6. Thank you Link to comment Share on other sites More sharing options...
Graphire78 Posted March 21, 2009 Share Posted March 21, 2009 thanx so much for this:) I have a P5GC-MX1333 & I ended up buy an Intex Realtek 1839 - this is a fake card. now gonna try to make the onboard Attansic L2 work with this:) Link to comment Share on other sites More sharing options...
jackrackam Posted March 27, 2009 Share Posted March 27, 2009 It's working on leopard 10.5.2 . I give it a try but I get "Ethernet Adaptor (en0) has a self-assigned IP address and may not be able to connect." Thanks for the effort but please P5GC-MX 1333 leopard : 10.5.5 (ideneb) After a few reboot and retry, it works however it seems that it does not like to sleep. When it wakes up I get "Ethernet Adaptor (en0) has a self-assigned IP address and may not be able to connect." again. kextunload + kextload seems to fix the problem (this solution was mentioned for ATL1E elsewhere). Thanks a lot very good job. Link to comment Share on other sites More sharing options...
kaliti Posted March 30, 2009 Share Posted March 30, 2009 It's working on leopard 10.5.2 . Working on iDeneb v1.4, 10.5.6, Vanilla Thanks!!! Link to comment Share on other sites More sharing options...
reader02 Posted April 6, 2009 Share Posted April 6, 2009 Here is new kext and source. It's fixed sleep issue. Atl2kext20090406.zip Atl2Source20090406.zip Link to comment Share on other sites More sharing options...
eberts Posted April 9, 2009 Share Posted April 9, 2009 Works on my asus p5gc-mx, great effort on the author's part to get this chip compatible with OSX86. So far its great for surfing and internet stuff, but is really slow when filesharing and in a home network setting, about ten times slower, I had to go back to a the 8139. Hope this info helps with debugging. Thanks a lot reader02! It works almost perfect Sleep issues is gone - no problems anymore. I checked the debug kext: The upload seems to be very poor - 3.4GB estimated time = 60 min. The 8139 showed 7 min. for the same file. It logs "no enough resource!!" every few packets. Thanks again, great work reader02 Link to comment Share on other sites More sharing options...
pentiumx Posted April 10, 2009 Share Posted April 10, 2009 This is really exciting for us P5GC owners. Does everyone report the same issue with even the latest version of the driver, that speed is slow? Thanks a lot reader02! It works almost perfect Sleep issues is gone - no problems anymore. I checked the debug kext: The upload seems to be very poor - 3.4GB estimated time = 60 min. The 8139 showed 7 min. for the same file. It logs "no enough resource!!" every few packets. Thanks again, great work reader02 Link to comment Share on other sites More sharing options...
Perx01 Posted April 10, 2009 Share Posted April 10, 2009 Thank you very much. Link to comment Share on other sites More sharing options...
reader02 Posted April 14, 2009 Share Posted April 14, 2009 Sleep issues is gone - no problems anymore. I checked the debug kext: The upload seems to be very poor - 3.4GB estimated time = 60 min. The 8139 showed 7 min. for the same file.It logs "no enough resource!!" every few packets. I have only one computer at home, we can not test file sharing.From your description, the card seems to work in 10M mode.Check your card's Speed LED, if lit? Or else set the media type to 100 M, full-duplex mode. Link to comment Share on other sites More sharing options...
eberts Posted April 14, 2009 Share Posted April 14, 2009 No, it says 100 M full-duplex (also tried manual/auto). Mobo LED and router report 100 as well. ifconfig > media: autoselect (100baseTX <full-duplex>) status: active Link to comment Share on other sites More sharing options...
macosku Posted April 22, 2009 Share Posted April 22, 2009 It's working on leopard 10.5.2 . The latest version at here : http://www.insanelymac.com/forum/index.php...d=1125350 Didn't work on my eee pc 1000h. ideneb 10.5.5 Any Suggestion please. I really need ur help here. Link to comment Share on other sites More sharing options...
Recommended Posts