Jump to content

ATI Radeon HD4350 PCIe


  • Please log in to reply
242 replies to this topic

#221
dawntodon

dawntodon

    InsanelyMac Protégé

  • Members
  • PipPip
  • 56 posts

1) booting in safe mode and updating might work, but generally the idea of combo updates is to install them right after the original snow leopard disk, rather than booting into 10.6.0 and then installing it from that...


I'm sorry for asking such a n00b question but how would I go about installing a combo update .pkg file right after installing the original snow leopard disk? I didn't realize this was even possible.

#222
MrTraverso

MrTraverso

    InsanelyMac Protégé

  • Members
  • PipPip
  • 63 posts
  • Gender:Male
  • Location:Rome
Hi,

I need a

<LI>Download the 4[3-6]00 SL filesbut the link is down. There's someone can upload again?



Please help me

#223
nmm2121

nmm2121

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 1 posts

@davidanberlin
no probs, new method for 10.6.5 complete with easy injector kext has been posted
i really reccommend the 10.6.5 update to everyone, C2RC5 is amazing
graphics performance is much faster


Hi Anarchintosh,

Quick question: I'm currently using 10.6.4 with my MSI 512mb 4350, and am using PC EFI 10.6 because my rig is low-profile, and hence I can't use VGA and have to use DVI. I want to update to the 10.6.5 method, but am not positive that this method using C2RC5 supports DVI. Can you confirm whether or not DVI output works? Thanks!

#224
joe_ny

joe_ny

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 1 posts

Hi all!
I'm new here... searched for infos about the HD4350, but found almost nothing...
Can anyone update me about drivers, patches or obscure magic rituals for getting this video card to work with two displays?

Thanks!


go here it work 4 me
http://www.insanelym...hp/t236869.html

#225
ANARCHiNTOSH

ANARCHiNTOSH

    Loldermort!!!!

  • Members
  • PipPipPipPip
  • 221 posts

Hi Anarchintosh,

Quick question: I'm currently using 10.6.4 with my MSI 512mb 4350, and am using PC EFI 10.6 because my rig is low-profile, and hence I can't use VGA and have to use DVI. I want to update to the 10.6.5 method, but am not positive that this method using C2RC5 supports DVI. Can you confirm whether or not DVI output works? Thanks!

DVI is the only one I think works on 10.6.5, it works for my low profile asus Ati 4350 512mb , i imagine your msi works as well. only one way to find out for sure though! have you read through the guide?

#226
brif8

brif8

    InsanelyMac Protégé

  • Members
  • Pip
  • 10 posts
  • Gender:Male
  • Location:FLa
Can someone please give help

I have a Zotac 9800 GT 1GB can not get Dual monitors to work at all.
The Zotac will only work with the VGA If I have the DVI connected it will not boot

So I bought an ATI 4350 1GB
Now when I swap over I get a white screen after 40 sec of the Apple with the rotating wheel

So I though it might be because of the NVidia Drivers so I swapped back
and removed the NVD*.kext from the S/L/E directory
and NVEnabler 64.kext from the E/E directory

Still no joy in getting the new card to work
Now I have my Nvidia back in and I can only get 1024x768 resolution which looks {censored}

Please How do I get my ATI 4350 1GB to work and hopefully with Dual Monitors

Thanks in advance

#227
brif8

brif8

    InsanelyMac Protégé

  • Members
  • Pip
  • 10 posts
  • Gender:Male
  • Location:FLa
Not sure If I'm going forward or backward
I have removed all NVidia and deleted the com.apple.kext.caches from /S/L/C

Now when I boot using the ATI 4350 card
It boots and then both monitors power down (Orange light) and black display IMPLIES NO INPUT signal

I can ssh into the machine so it booted and is running but nothing shows on either display (DVI or VGA)

Darwin/x86 boot v5.0.132 - Chameleon v2.0-RC4_PCEFI_10.5_AsereBLN r
BuildDate: 2010-02-12 01:05:22
3071MB memory

When booting with -x -v I see

mbinit: done (64 MB memory set for mbuf pool)
netkas presents fakesmc, a kext which emulates smc device
HDAEnabler: copyright © 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SPAudio support: Taruga
Not loading kext com.apple.kext.ATI4600Controller - not found and kextd not available in early boot
HDAEnabler: copyright © 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SPAudio support: Taruga
FireWire runtime power conservation disabled (2)
From path: "uuid",
Waiting for boot volume with UUID B3B.....
....

....
Previous Shutdown Cause: 0
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
DSMOS has arrived

That is the last thing seen before the screens blank out

scroll by again screens go blank (NO INPUT signal)


ATI4600Controller.kext does exist in /S/L/E
ATI4600Controller 1.6.24.17 (8901)

When booting with -x -f I see

the Apple Logo Spinning wheel and a progress bar (gray rounded edges) Slowly moves to about 30% then progress bar disappears and the wheel keeps spinning for 20 secs and then again Blank displays (or No Input Displays)



Seeing I have ssh access is there any command line stuff I can do like Kext Utility loads, or EFI Studio ???

Any ideas ??

Gaining Remote Screen Sharing Access I have found the following

In System Profiler
Chipset Model: ATI Radeon 4300
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x954f
Revision ID: 0x0000
ROM Revision: 113-B7710C-176
EFI Driver Version: 01.00.318
Displays:
Display Connector:
Display Connector:

So it has detected the Graphics Cards Not the Displays??

Thanks in advance

#228
ayaw

ayaw

    InsanelyMac Protégé

  • Members
  • Pip
  • 11 posts

Not sure If I'm going forward or backward
I have removed all NVidia and deleted the com.apple.kext.caches from /S/L/C

Now when I boot using the ATI 4350 card
It boots and then both monitors power down (Orange light) and black display IMPLIES NO INPUT signal

I can ssh into the machine so it booted and is running but nothing shows on either display (DVI or VGA)

Darwin/x86 boot v5.0.132 - Chameleon v2.0-RC4_PCEFI_10.5_AsereBLN r
BuildDate: 2010-02-12 01:05:22
3071MB memory

When booting with -x -v I see

mbinit: done (64 MB memory set for mbuf pool)
netkas presents fakesmc, a kext which emulates smc device
HDAEnabler: copyright © 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SPAudio support: Taruga
Not loading kext com.apple.kext.ATI4600Controller - not found and kextd not available in early boot
HDAEnabler: copyright © 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SPAudio support: Taruga
FireWire runtime power conservation disabled (2)
From path: "uuid",
Waiting for boot volume with UUID B3B.....
....

....
Previous Shutdown Cause: 0
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
DSMOS has arrived

That is the last thing seen before the screens blank out

scroll by again screens go blank (NO INPUT signal)


ATI4600Controller.kext does exist in /S/L/E
ATI4600Controller 1.6.24.17 (8901)

When booting with -x -f I see

the Apple Logo Spinning wheel and a progress bar (gray rounded edges) Slowly moves to about 30% then progress bar disappears and the wheel keeps spinning for 20 secs and then again Blank displays (or No Input Displays)



Seeing I have ssh access is there any command line stuff I can do like Kext Utility loads, or EFI Studio ???

Any ideas ??

Gaining Remote Screen Sharing Access I have found the following

In System Profiler
Chipset Model: ATI Radeon 4300
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x954f
Revision ID: 0x0000
ROM Revision: 113-B7710C-176
EFI Driver Version: 01.00.318
Displays:
Display Connector:
Display Connector:

So it has detected the Graphics Cards Not the Displays??

Thanks in advance


I experience this too when I reinstall my hackintosh
first i'm in 10.6, I need to boot with "-x -f arch=i386" to get rid of blank screen

then I do 10.6.5 update, reinject the device id to Info.plist and it works fine now without any bootflags ;)

#229
brif8

brif8

    InsanelyMac Protégé

  • Members
  • Pip
  • 10 posts
  • Gender:Male
  • Location:FLa

then I do 10.6.5 update, reinject the device id to Info.plist and it works fine now without any bootflags :P



Currently I have DVI working only when connected to a DVI monitor using a DVI to VGA converter does NOT work
Still the VGA to VGA monitor does NOT work

How do you reinject the device id to Info.plist ???
Can you please break this into steps for me
Thanks

#230
ayaw

ayaw

    InsanelyMac Protégé

  • Members
  • Pip
  • 11 posts

Currently I have DVI working only when connected to a DVI monitor using a DVI to VGA converter does NOT work
Still the VGA to VGA monitor does NOT work

How do you reinject the device id to Info.plist ???
Can you please break this into steps for me
Thanks


Just tried to replace my DVI cable to VGA cable to test this out.
Seems like this works on DVI only. VGA isn't working, still get the blank screen.

To inject the device id, look at this post : http://www.insanelym...owtopic=221422#
There is a detailed information about adding the device id in the middle of the post.

#231
nei-k

nei-k

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts
  • Location:Romania
I have same problem too. I tried everything but I can not get rid of black screen. Snow Leopard boots but without signal from videocard

#232
brif8

brif8

    InsanelyMac Protégé

  • Members
  • Pip
  • 10 posts
  • Gender:Male
  • Location:FLa

I have same problem too. I tried everything but I can not get rid of black screen. Snow Leopard boots but without signal from videocard


I know it can be hard I managed to get the DVI working by simply using a DVI monitor
Still can not get VGA to work thou, my ATI4500Controller.kext and ATIRadeonX2000.kext already had the Device ID

Still would like to get the VGA to function

#233
nei-k

nei-k

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts
  • Location:Romania
I have only an VGA connector in my iiyama display. My card is an HIS ATI 4350 with VGA, DVI and HDMI connectors. I tried both VGA and DVI (with VGA adaptor) without luck. I Did not try the HDMI connector

#234
plipli

plipli

    InsanelyMac Protégé

  • Members
  • PipPip
  • 54 posts
Anyone updated to 10.6.6 ? Lots of ATI kext inside this update :s

EDiT : no change inside the kext I have checked, trying now to update

EDiT2 : update failed, now in -x, I will check the ATI kexts.

EDiT3 : added 0x954f1002 to ATI4600, rebooting...

EDiT4: wouhou success !
Posted Image

EDiT5:
woot green icons in AppStore !
Posted Image

#235
nei-k

nei-k

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts
  • Location:Romania
Great! I will try to update when I get home. Your monitor has DVI or VGA input? Mine has only VGA input and in 10.6.5 version I get blank screen no matter if i connect to the video card by VGA port or by DVI port via donngle

#236
ANARCHiNTOSH

ANARCHiNTOSH

    Loldermort!!!!

  • Members
  • PipPipPipPip
  • 221 posts
thanks for testing plipli
btw, there is a device-id injector kext for 4600controller over at post here
its called ATI4350.Fix.v2, and it's in ATI4350.Fix.MULTi.zip

#237
nei-k

nei-k

    InsanelyMac Protégé

  • Members
  • Pip
  • 32 posts
  • Location:Romania
I have given up trying to setup my Ati 4350, and I bought a Palit G210 that worked out of the box on my system

#238
smokeymcpot

smokeymcpot

    InsanelyMac Protégé

  • Members
  • Pip
  • 24 posts

I have given up trying to setup my Ati 4350, and I bought a Palit G210 that worked out of the box on my system


Got everything working on 10.6.6 but I got a question .. Anyone trying to get this working on Lion?

#239
arikstress

arikstress

    InsanelyMac Protégé

  • Members
  • Pip
  • 31 posts
  • Gender:Male
  • Location:indonesia
yaaaaaaaaay i finally can make my HIS ATI HD 4350 working!!!! working flawlessly , but i make it work only at SL 10.6.8

#240
chessperso

chessperso

    InsanelyMac Protégé

  • Members
  • Pip
  • 30 posts
Everybody who's got a 4xxx, you want to take a look at the 28th of october update of the 20th post of this other topic !





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy