Jump to content

ATIRadeonX1000.kext for ID 5975


super_engine
 Share

4 posts in this topic

Recommended Posts

Test it

Sincerely i'm not sure if X1100 is the same of X1300-X1400 family

 

Install the kext attached with kexthelper and reboot with -v -f flags

 

This kext can enable CI/QE but the control of resolution depends by the system configuration. If you don't have display resolution switch you can use, at the boot, the flag "Graphics Mode"="XresxYresxColorbits" (i.e "Graphics Mode"="1280x800x32")

 

Good Luck

ATIRadeonX1000.kext.zip

Link to comment
Share on other sites

Install your kext and gray window with 4 languages :)

 

reboot with -v -f and kernel panic. - There are many words (how and where can I find it to send you, in what log (or another) file?)

 

I delete this kext from Windows and Leopard works again.

Link to comment
Share on other sites

Hi i used your kext i have a IPC Mac OS X 10.5.6:

 

Laptop FUJITSU SIEMENS Amilo Pa 1510 AMD Turion 64X 1.6Gx2 120G

Realtek ALC861 @ ATI SB450

ATI Radeon XPress 1100 0x5975

 

i'll write you the output:

 

 

Display:

 

Type: Display

Bus: PCI

VRAM (Total): 128 MB

Vendor: ATI (0x1002)

Device ID: 0x5975

Revision ID: 0x0000

Kernel Extension Info: No Kext Loaded

Displays:

Display:

Resolution: 1024 x 768

Depth: 32-bit Color

Core Image: Software

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

 

the bottom bar is transparent i see now VRAM (Total): 128 MB which is far good i did not

manage to to that with others kext, but for QE/CI hardware acceleration i do not know what to put,maybe now to try calistro 3.If you havew any ideea.

 

Daniel

 

 

Test it

Sincerely i'm not sure if X1100 is the same of X1300-X1400 family

 

Install the kext attached with kexthelper and reboot with -v -f flags

 

This kext can enable CI/QE but the control of resolution depends by the system configuration. If you don't have display resolution switch you can use, at the boot, the flag "Graphics Mode"="XresxYresxColorbits" (i.e "Graphics Mode"="1280x800x32")

 

Good Luck

Link to comment
Share on other sites

Closed

 

Support is not possible on those chips, not because of the GPU but because of the shared memory. The problem is not related to device ID.

If you want support, write a GART driver. Or find the hidden feature that might already be in the current kexts and just waits for some strings to be injected.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...