wizzord Posted January 21, 2009 Share Posted January 21, 2009 Hi, I tried modifiing a driver myself following this description, but booting after inserting the modified driver caused my computer to crash (sort of flickering, then black screen). I saw the Natit-driver didn't work either. Is there any chance of getting the card to work properly or should I just get another one? EDIT: I know the guide was not supposed to be for the X1550, just hoped it could work the same way… Link to comment Share on other sites More sharing options...
super_engine Posted January 24, 2009 Share Posted January 24, 2009 send me your DeviceID I'll try help you Link to comment Share on other sites More sharing options...
wizzord Posted January 24, 2009 Author Share Posted January 24, 2009 Thanks! Do you mean the EDID-data? And if not, where can I find it? EDIT: Sorry for the stupid question, I found it: Device ID: 715F Vendor ID: 1002 I also tried only doing the second part of what's discribed in the link above, but it didn't work out either. Link to comment Share on other sites More sharing options...
super_engine Posted January 25, 2009 Share Posted January 25, 2009 Attached AtiRadeonX1000 kext for DeviceID 715F Use kexthelper to install it Remove all injectors (Natit or other) Reboot with -v -f flags Good Luck ATIRadeonX1000.kext.zip 1 Link to comment Share on other sites More sharing options...
wizzord Posted January 25, 2009 Author Share Posted January 25, 2009 WOW, it worked! Thanks a lot! A few graphic glitches, but that's secondary! Would you mind sharing how you did it? My first priority was having it work, but understanding it would be nice, too… Link to comment Share on other sites More sharing options...
super_engine Posted January 25, 2009 Share Posted January 25, 2009 See my post where explain how enable CI/QE on my X1350 For your X1550 i have only changed deviceID Goodby 1 Link to comment Share on other sites More sharing options...
RedCrab Posted February 4, 2009 Share Posted February 4, 2009 Hi! I'm having the same problem with my HIS x1550 No QE and CI software accelerated... Here are my Specs: Radeon X1300 PRO Series: Chipset Model: Radeon X1300 PRO Series Type: Display Bus: PCIe PCIe Lane Width: x1 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7143 Revision ID: 0x0000 Displays: Apple Cinema HD Display: Resolution: 1920 x 1200 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected Resolution works perfectly and even the PCIE 1x doesn't seem to be a problem running this card... If I could just get QE running I'd be a happy power Cube user ;-) Been trying for weeks reading and reinstalling with tons of kext files. No results. Help would be greatly appreciated! Link to comment Share on other sites More sharing options...
super_engine Posted February 5, 2009 Share Posted February 5, 2009 Edited ATIRadeonX1000.kext for your ID (7143) Install it with kexthelper and reboot with flags -v -f Good enjoy Hi! I'm having the same problem with my HIS x1550 No QE and CI software accelerated... Here are my Specs: Radeon X1300 PRO Series: Chipset Model: Radeon X1300 PRO Series Type: Display Bus: PCIe PCIe Lane Width: x1 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7143 Revision ID: 0x0000 Displays: Apple Cinema HD Display: Resolution: 1920 x 1200 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected Resolution works perfectly and even the PCIE 1x doesn't seem to be a problem running this card... If I could just get QE running I'd be a happy power Cube user ;-) Been trying for weeks reading and reinstalling with tons of kext files. No results. Help would be greatly appreciated! ATIRadeonX1000_for_7143.kext.zip Link to comment Share on other sites More sharing options...
RedCrab Posted February 6, 2009 Share Posted February 6, 2009 Edited ATIRadeonX1000.kext for your ID (7143)Install it with kexthelper and reboot with flags -v -f Good enjoy Hi super_engine! Thanks for your help. I've tried editing the Kext with my device ID which caused kernel panics. I'll try your kext and will post feedback. Thanks for helping and supporting me and everyone here! Best Regards! -------------------------------------edit---------------------------------------------------------------------- What can I say! You've just made my day!! Installed your kext file, repaired permissions, rebooted and... everything working perfectly! How did you do it? I owe you a beer or two! ;-) Thanks Link to comment Share on other sites More sharing options...
super_engine Posted February 6, 2009 Share Posted February 6, 2009 Thank You for the beer What I do is very easy. I change only the DeviceID in the plist file and in the HEX file inside the kext. Only this. Hi super_engine! Thanks for your help. I've tried editing the Kext with my device ID which caused kernel panics. I'll try your kext and will post feedback. Thanks for helping and supporting me and everyone here! Best Regards! -------------------------------------edit---------------------------------------------------------------------- What can I say! You've just made my day!! Installed your kext file, repaired permissions, rebooted and... everything working perfectly! How did you do it? I owe you a beer or two! ;-) Thanks Link to comment Share on other sites More sharing options...
testmusictest Posted February 7, 2009 Share Posted February 7, 2009 Thank You for the beerWhat I do is very easy. I change only the DeviceID in the plist file and in the HEX file inside the kext. Only this. Hi, Super_engine I'm testmusictest. I have 2 X1550 card. 1. GeCube raedon X1550 model no. HM1550GE2-D3 Device ID:7146 2. MSI X1550(Only has a DVI & a TV out) Device ID:715F Though I cannot use dual vga w/ this 2 card. But I believe that I drive them perfectly. 1.) W/ the card Device ID:7146: No matter you use iDeneb 1.3 or XxX 10.5.6 final or iPC 10.5.6 final, DO NOT choose any VGA card driver during installation. You'll find QE/CI enabled by default when enter into the system. But w/ mouse cursor glitch. Okay, here we go. Install this NatitX1330.kext, open terminal.app to do the "diskutil repairpermissions /" and then reboot. No need flag -v -f or anything like that. Things are done now. 2.) W/ the card Device ID:715F: No matter you use iDeneb 1.3 or XxX 10.5.6 final or iPC 10.5.6 final, DO NOT choose any VGA card driver during installation. You'll find QE/CI NOT enabled by default when enter into the system. Glad that I have your ATIRadeonX1000.kext. Now I have QE/CI enabled by default when enter into the system. But w/ mouse cursor glitch. Okay, Where we go then? The same NatitX1330.kext!! , open terminal.app to do the "diskutil repairpermissions /" and then reboot. No need flag -v or anything like that. Things are done now. Now you have the Great cheap X1550 card w/ QE/CI perfectly!!! Here I add this 2 kexts. This is testmusictest's share and hope you can enable more X1550 card w/ my share. Best regards, testmusictest p.s.: If any body find the way to dual VGA w/ X1550, please inform!!! That'll make X1550 better than perfect!!! p.s.2 I'll post my share as a new topic to attract more ppl use this card. For_X1550.zip Link to comment Share on other sites More sharing options...
wizzord Posted February 7, 2009 Author Share Posted February 7, 2009 Hi testmusictest, thanks for your contribution! I will check as soon as I get home… Am I understanding the part I quoted correctly?: 1. install the system without a specific driver (in my case I will have to check whether I need to remove the drivers, as I use an original where I cannot disable the drivers) 2. install the modified driver 3. install the NatitX1330.kext 4. repair permissions in the terminal and I get a fully working X1550, without the graphical glitches. 2.) W/ the card Device ID:715F: No matter you use iDeneb 1.3 or XxX 10.5.6 final or iPC 10.5.6 final, DO NOT choose any VGA card driver during installation. You'll find QE/CI NOT enabled by default when enter into the system. Glad that I have your ATIRadeonX1000.kext. Now I have QE/CI enabled by default when enter into the system. But w/ mouse cursor glitch. Okay, Where we go then? The same NatitX1330.kext!! , open terminal.app to do the "diskutil repairpermissions /" and then reboot. No need flag -v or anything like that. Things are done now. Now you have the Great cheap X1550 card w/ QE/CI perfectly!!! Link to comment Share on other sites More sharing options...
RedCrab Posted February 7, 2009 Share Posted February 7, 2009 Thank You for the beerWhat I do is very easy. I change only the DeviceID in the plist file and in the HEX file inside the kext. Only this. Ok it was the HEX string which I was missing... That was probably what was causing the kernel panics. Stupid me. Just an addition for anyone with the same device ID: you need to add a natit kext for it to work! Thanks again! Link to comment Share on other sites More sharing options...
testmusictest Posted February 7, 2009 Share Posted February 7, 2009 Hi testmusictest, thanks for your contribution! I will check as soon as I get home… Am I understanding the part I quoted correctly?: 1. install the system without a specific driver (in my case I will have to check whether I need to remove the drivers, as I use an original where I cannot disable the drivers) 2. install the modified driver 3. install the NatitX1330.kext 4. repair permissions in the terminal and I get a fully working X1550, without the graphical glitches. Yes, you've got it! Link to comment Share on other sites More sharing options...
wizzord Posted February 10, 2009 Author Share Posted February 10, 2009 Thanks to all of you! I wanted to look into this when I had a little more time, but I guess I would never have had the idea of trying the Natit-driver in addition to the modified kext… So have one of these virtual beers on me Link to comment Share on other sites More sharing options...
the_fellowship Posted February 14, 2009 Share Posted February 14, 2009 Hi, I'm new to this Hackintosh stuff and would really appreciate if someone could help me with regards to the following graphics card: ATI Radeon X1300 Series: Chipset Model: ATI Radeon X1300 Series Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x7183 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 I have no idea how to modify the kext myself, so would really, really appreciate if someone could show me how (or even do it for me ;-) Thanks in advance Edit: I have tried modifying the device id in the info.plist file (within ATIRadeonX1000.kext) to match my DeviceID (7183), but when I install the kext and reboot, I get a panic screen :-( I have checked in the Natit.kext (info.plist file) and my device id is in there( under ATI Radeon X1300). I also tried removing the Natit.kext and rebooting, but I only got 1200 * 786 resolution, but still no QE support :-( Does this mean the graphics card doesn't support Quartz Extreme? In the above posts, I am unclear what is meant by the HEX file within the kext? Does this mean the hex values in the info.plist file? Any help would be much appreciated Link to comment Share on other sites More sharing options...
capucchino Posted February 20, 2009 Share Posted February 20, 2009 hi.. i'm new with mac os thingy... and recently i was able to install XxX 10.5.6 Universal on my Rig. but after install, i've had some problem that i cant solve.. i've been searching through this forum.. but i never could enable QE/CI on my VGA Card Detail: VGA PowerColor ATI Radeon X1550 512MB (on box @ windowsXP display info) Device ID 0x7140 Monitor Samsung SyncMaster 540N 15" i've been used : 1. REV1_Empty_skull_x16x0 all id 10.5.5 -> install successfully (but never get into desktop mode, only shows blank screen with monitor indicator blinks) 2. Modbin_X1650_71c7_Working_Fix (already edit and hexing string 71c7 to 7140) (kernel panic) 3. NatitX1300.r1v1 (kernel panic) Display:Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB -> dunno why it detects only 256 MB Vendor: ATI (0x1002) Device ID: 0x7140 Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported any info will be very helpfull .. thanks and regards. Link to comment Share on other sites More sharing options...
super_engine Posted February 21, 2009 Share Posted February 21, 2009 Hi Capucchino Try my kext for ID 7140 See my post on this section Good Luck p.s. Are you italian ? hi..i'm new with mac os thingy... and recently i was able to install XxX 10.5.6 Universal on my Rig. but after install, i've had some problem that i cant solve.. i've been searching through this forum.. but i never could enable QE/CI on my VGA Card Detail: VGA PowerColor ATI Radeon X1550 512MB (on box @ windowsXP display info) Device ID 0x7140 Monitor Samsung SyncMaster 540N 15" i've been used : 1. REV1_Empty_skull_x16x0 all id 10.5.5 -> install successfully (but never get into desktop mode, only shows blank screen with monitor indicator blinks) 2. Modbin_X1650_71c7_Working_Fix (already edit and hexing string 71c7 to 7140) (kernel panic) 3. NatitX1300.r1v1 (kernel panic) any info will be very helpfull .. thanks and regards. Link to comment Share on other sites More sharing options...
Mr.HANA Posted February 28, 2009 Share Posted February 28, 2009 0x71831002 use this x1000 fix x1300_x1550.zip Link to comment Share on other sites More sharing options...
therampok Posted March 3, 2009 Share Posted March 3, 2009 WOW, it worked! Thanks a lot! A few graphic glitches, but that's secondary! Would you mind sharing how you did it? My first priority was having it work, but understanding it would be nice, too… i have same problem with u my ati x1550 Q E does't work any suggest for my ati x1550 thank u sorry for my bad emglish Link to comment Share on other sites More sharing options...
archond Posted March 3, 2009 Share Posted March 3, 2009 HI all! Can help me anyone to do work QE in ati radeon HD 3470?! ID is =95C4 THANK'S!!! Link to comment Share on other sites More sharing options...
wizzord Posted March 3, 2009 Author Share Posted March 3, 2009 i have same problem with u my ati x1550 Q E does't workany suggest for my ati x1550 thank u sorry for my bad emglish If everything else works, have you tried the driver from this post? Link to comment Share on other sites More sharing options...
therampok Posted March 3, 2009 Share Posted March 3, 2009 i have same problem with u my ati x1550 Q E does't workany suggest for my ati x1550 thank u sorry for my bad emglish power color x1550 my device id is 7143 revision id 0x0000 i have try all natit but my Q E doesn't work ether... how do i try edited my natit please help me thank's send me your DeviceIDI'll try help you hi...super_engine..could u help me please my ati x1550 Quartz Extreme not support could u help me to fix this problem vendor : ATI(0x1002) Device ID : 7143 revision ID : 0x0000 thank you very much.... Link to comment Share on other sites More sharing options...
therampok Posted March 5, 2009 Share Posted March 5, 2009 send me your DeviceIDI'll try help you hi...super_engine..could u help me please my ati x1550 Quartz Extreme not support could u help me to fix this problem vendor : ATI(0x1002) Device ID : 7143 revision ID : 0x0000 thank you very much.... Link to comment Share on other sites More sharing options...
psychotropic Posted March 5, 2009 Share Posted March 5, 2009 Oh god... I had this wretched card when I was trying to install Kalyway. This card gave me problems even in Windows and especially in openSUSE. I've since upgraded to the HD4870 and while not that much better in the way of OSX compatibility it's really a much more solid card... Link to comment Share on other sites More sharing options...
Recommended Posts