makepies Posted January 4, 2009 Share Posted January 4, 2009 I have a Dell Studio 1735 laptop running iAtkos 5 10.5.5 just about fine .... but no joy with the display - its recognizing the ATI Mobility RadeonHD 3650 PCIe card as a 16MB ATI generic something or other. After failing (black and white blocky pixels at boot) with the ATI driver and EFI strings on the install CD, I then tried numerous posts and research at the wiki but nothing is setting this card up right yet Can anyone help? Here is what hackintosh says: Display: Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9591 Revision ID: 0x0000 Kernel Extension Info: No Kext Loaded Displays: Display: Resolution: 1024 x 768 Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported I notice that the hardware is identified correctly but the display and software aren't right. At boot up time, it says something about being a 16MB ATI card (PS - do the mobility PCIe cards run the same drivers as the equivalent desktop cards?) As an aside, I also can't get the keyboard and trackpad to work. They worked fine during installation, but after install, neither is recognized. So I temporarily have to use a USB keyboard and mouse and that works fine ... but I'd really like to ditch them and use the OEM laptop keyboard and trackball. I'd appreciate any help anyone can give me a on this, Thanks guys. This is an awesome project and the website (technical details and support) is just astounding! Link to comment Share on other sites More sharing options...
yeuthem Posted January 5, 2009 Share Posted January 5, 2009 I have the same device ID.. 9591, don't seem to have any solution right now.. Link to comment Share on other sites More sharing options...
Skyy Posted January 5, 2009 Share Posted January 5, 2009 I feel with you two, I have the same card... Link to comment Share on other sites More sharing options...
yeuthem Posted January 9, 2009 Share Posted January 9, 2009 As you guy know.. you can get the resolution 1440 x 1200 or something like that.. by going to the boot.list.. and edit the boot menu to enable graphic to a higher resolution. But still, that doesn't resolve the driver issue with ATI mobility device id 9591.. ANYBODY>> !!!!!!!!!! HELPPPPPPPP!!!!!!!!!! Link to comment Share on other sites More sharing options...
b:z Posted March 16, 2009 Share Posted March 16, 2009 Is there anyone get it work under Leopard? I have the same card (0x9591), and still not work. Link to comment Share on other sites More sharing options...
xyly Posted March 20, 2009 Share Posted March 20, 2009 I'm feel so sad because I can't use leopard for a month in lack of 9591 (ASUS F8VA). Link to comment Share on other sites More sharing options...
rjcb Posted March 20, 2009 Share Posted March 20, 2009 idem :/ Link to comment Share on other sites More sharing options...
tema1487 Posted March 26, 2009 Share Posted March 26, 2009 Hello, try this driver. Link to comment Share on other sites More sharing options...
rjcb Posted March 26, 2009 Share Posted March 26, 2009 Hi guys, I have tried this driver, but no result. I have installed and after I have repaired permission with the disk utility reboot but the system is blocked. I have attached some picture to see the result and to help the developers. Hello, try this driver. Link to comment Share on other sites More sharing options...
Otez_Lee Posted March 26, 2009 Share Posted March 26, 2009 hello! i have this problem too. HELP Link to comment Share on other sites More sharing options...
notImpossible Posted April 3, 2009 Share Posted April 3, 2009 Hello, try this driver. Hey, Works on my Lenovo W500 with a card named "ati FireGL v5700"! cheers, Nik Link to comment Share on other sites More sharing options...
Leathal Posted June 23, 2009 Share Posted June 23, 2009 Hello, try this driver. Hi your link is broken, can you repost it again or PM me with the new link? I would like to try to give this driver a go on my W500! Thanks leathal Link to comment Share on other sites More sharing options...
kianwee Posted June 23, 2009 Share Posted June 23, 2009 Hi your link is broken, can you repost it again or PM me with the new link? I would like to try to give this driver a go on my W500! Thanks leathal Yeah, the link is broken. Can you post up the new link please. Thank you. Link to comment Share on other sites More sharing options...
smarty94 Posted June 23, 2009 Share Posted June 23, 2009 Yeah, the link is broken. Can you post up the new link please. Thank you. The driver is in the 1st post of the last exile thread. look for "Mobility 3650 Test" this is what you want. Link to comment Share on other sites More sharing options...
kianwee Posted June 23, 2009 Share Posted June 23, 2009 The driver is in the 1st post of the last exile thread. look for "Mobility 3650 Test" this is what you want. That link is already not working for a long time. Tried it before. Link to comment Share on other sites More sharing options...
Recommended Posts