Jump to content

How to fix boot0 error in Kalyway/other distros


sonikku x
 Share

1 post in this topic

Recommended Posts

Hello

 

I am going to show you guys how to fix that error.

 

Use this method only if you installed hackintosh as a second partition next to your first partition which is windows.

 

 

First, you need to do some research on your computer model and hardware. The best place is on the osx86 wiki. Make sure you set the bios to boot to the cd and change settings according to the instruction of your model from the wiki

 

Now, it's time to boot the Kalyway disk. Press any key when prompt. It will take you through text, it will only take 15 minutes. You should be in the installation screen.

 

Now, I highly recommend you go through the instructions of how to install your cd type.

 

Ok, now waiting is the game. You have to wait untill the computer restarts. Don't manually restart the computer!! This would give you the error!

 

Anyway, if you still receive it when booting from hard disk that's ok.

 

Go and run Mac Os X via cd then make sure those files on the desktop (the named windows partiton commonly called untitled) are backed-up via cd or external hard-disk. Make sure to record the size of the partition.

 

Before you restart, type in google "G-parted". You should find a partiton software. Download it and burn it to a cd, then reset.

 

Now boot into the cd. To move options you need a ps/2 keyboard, but for most parts a usb keyboard works. Press enter, then enter and then type 33 press enter, and then enter again.

 

You should boot into a linux-like operation system. Now, format the partition written down on paper by right-clicking on it and formatting it to the same partition system (NTFS for example), then continue.

 

When it is done, restart the computer, enter the bios and boot from hard-drive. Voila, Booting works!!

 

Hope this instructions were fairly simple...

Link to comment
Share on other sites

 Share

×
×
  • Create New...