Jump to content

Dell XPS M1530 / M1330 AppleHDA Solutions (Sigmatel STAC 9228)


talisman
 Share

201 posts in this topic

Recommended Posts

Can you try booting into your other partition, copy the working AppleHDA.kext over, and then repair permissions on the crashing partition and see if that will boot?

 

Yea, Thanks. I have it booting again. If I use your applehda and patch it with my codec dump, will everything still work (Mute, autoswitch, etc.)?

Link to comment
Share on other sites

It just keeps saving crash reports over and over, doesn't really panic or freeze.

 

Unclean shutdown rarely causes such a problem as we all have to do that all the time. It seems more like a permissions issue

 

Can you in the single user mode with a -s??

 

If you can then I would suggest that you remove the AppleHDA.kext from both your mac installations.

 

The repair permissions with a "diskutil repairPermissions /"

 

If you cannot boot into the single user mode then boot with the installation CD and then use the terminal to delete the kexts and then use disk utils to repair permission on both installations.

 

If after that you can boot into mac then install the kext using "Kext Helper" where you have far less chances to make mistakes and then repair permissions. Things should work fine after that.

 

Sound works out of both headphone jacks upon boot but nothing out of the internal speakers even after sleep.

 

Why is the M1330 Audio such a hard nut to crack???

Link to comment
Share on other sites

thank you so much!!! :-)

after 5th january update my sound is working finally before that i patched with apple hda patcher and an self created dump-file - it had the same data into it, as the one which was posted here - still didn't work...

internal mic doesnt work yet (also shutdown and restart bugs - which shouldn't have to have anything to do with audio) also i'm quite new to osx86.

 

anyway thanks a lot - you brought me in position to almost have a working system running!

Link to comment
Share on other sites

thank you so much!!! :-)

after 5th january update my sound is working finally before that i patched with apple hda patcher and an self created dump-file - it had the same data into it, as the one which was posted here - still didn't work...

internal mic doesnt work yet (also shutdown and restart bugs - which shouldn't have to have anything to do with audio) also i'm quite new to osx86.

 

anyway thanks a lot - you brought me in position to almost have a working system running!

 

I felt the same once I had the audio working!!

 

welcome to osx86. We are still working on the int mic.... hopefully we will have a fix soon....

Link to comment
Share on other sites

Weird, using the stable kext for the m1530, audio is good, switching as well but i have no line-in, weird. My bios says I have a Sigmatel 9205 but everyone else says they have a 9228 and i'm really confused. In my sound options input tab I have an option for internal mic (which doesn't work) and and Unknown...hm...any ideas?

Thanks

Link to comment
Share on other sites

Weird, using the stable kext for the m1530, audio is good, switching as well but i have no line-in, weird. My bios says I have a Sigmatel 9205 but everyone else says they have a 9228 and i'm really confused. In my sound options input tab I have an option for internal mic (which doesn't work) and and Unknown...hm...any ideas?

Thanks

 

Mic works out of the jack on the extreme right. Make sure in your sys pref has internal mic highlighted in the input section. We do have a 9228 on the M1530. The BIOS is incorrect. It shows me 9205 too.

Link to comment
Share on other sites

How to modify Pathmap or pinconfig to make the Volume Slider appears on Microphone, I made some mods to other AppleHDA (like sigmatel 9200, 9205 and ALC883) and on some the Slider does not appear on Microphone

Link to comment
Share on other sites

How to modify Pathmap or pinconfig to make the Volume Slider appears on Microphone, I made some mods to other AppleHDA (like sigmatel 9200, 9205 and ALC883) and on some the Slider does not appear on Microphone

 

I don't have a slider too... Apparently The King made it work but I don't think he has it on his tutorial....

Link to comment
Share on other sites

Can anyone test these for me? I edited the ConfigData so can you guys test these out.

 

ConfigData for M1530:

<00a71c12 00a71d10 00a71e21 00a71f01 00b71cf0 00b71d00 00b71ef0 00b71f40 00c71cf0 00c71d00 00c71ef0 00c71f40 00d71c10 00d71d01 00d71e17 00d71f90 00e71c20 00e71d10 00e71ea1 00e71f02 00f71c30 00f71d10 00f71e01 00f71f02 01071cf0 01071d00 01071ef0 01071f40 01171cf0 01171d00 01171ef0 01171f40 01271cf0 01271d00 01271ef0 01271f40 01371c50 01371d03 01371ea6 01371f90 01471cf0 01471d00 01471ef0 01471f40 02171ca0 02171d10 02171e56 02171f98 02271cf0 02271d00 02271ef0 02271f40>

 

ConfigData for M1330:

<00A71C12 00A71D10 00A71E21 00A71F01 00B71CF0 00B71D00 00B71EF0 00B71F40 00C71CF0 00C71D00 00C71EF0 00C71F40 00D71C13 00D71D01 00D71E17 00D71F90 00E71C30 00E71D10 00E71EA1 00E71F02 00F71C11 00F71D10 00F71E01 00F71F01 01071CF0 01071D00 01071EF0 01071F40 01171CF0 01171D00 01171EF0 01171F40 01271CF0 01271D00 01271EF0 01271F40 01371C50 01371D03 01371EA6 01371F90 01471CF0 01471D00 01471EF0 01471F40 02171CA0 02171D10 02171E56 02171F18 02271CF0 02271D00 02271EF0 02271F40>

 

ConfigData for 1525:

<00a71c12 00a71d10 00a71e21 00a71f01 00b71cf1 00b71d00 00b71ef0 00b71f40 00c71c30 00c71d91 00c71ea7 00c71f90 00d71c13 00d71d01 00d71e17 00d71f90 00e71c50 00e71d30 00e71e81 00e71f01 00f71c11 00f71d10 00f71e01 00f71f01 01071cf2 01071d00 01071ef0 01071f40 01171cf3 01171d00 01171ef0 01171f40 01271cf4 01271d00 01271ef0 01271f40 01371cf7 01371d00 01371ef0 01371f40 01471cf5 01471d00 01471ef0 01471f40 02171ca0 02171d70 02171e44 02171f93 02271cf6 02271d00 02271ef0 02271f40>

Link to comment
Share on other sites

I cant get on IRC right now because I have to go but maybe some other time. MM damn I tried to get it working... I don't know what it could be...I wish I could get my hands on one. I think a guy I know has one, maybe I'll ask him to check things out.

Link to comment
Share on other sites

Can anyone test these for me? I edited the ConfigData so can you guys test these out.

 

ConfigData for M1330:

<00A71C12 00A71D10 00A71E21 00A71F01 00B71CF0 00B71D00 00B71EF0 00B71F40 00C71CF0 00C71D00 00C71EF0 00C71F40 00D71C13 00D71D01 00D71E17 00D71F90 00E71C30 00E71D10 00E71EA1 00E71F02 00F71C11 00F71D10 00F71E01 00F71F01 01071CF0 01071D00 01071EF0 01071F40 01171CF0 01171D00 01171EF0 01171F40 01271CF0 01271D00 01271EF0 01271F40 01371C50 01371D03 01371EA6 01371F90 01471CF0 01471D00 01471EF0 01471F40 02171CA0 02171D10 02171E56 02171F18 02271CF0 02271D00 02271EF0 02271F40>

 

 

Didn't work, no sound from speakers headphones or line out, Internal Mic also.

 

External mic is the only that works.

 

here is pin config that works on M1330 (btw I deleted the ports that aren't used)

<00a71c50 00a71d40 00a71e21 00a71f02 00d71c50 00d71d40 00d71e13 00d71f01 00e71c12 00e71d90 00e71ea1 00e71f02 00f71c50 00f71d30 00f71e01 00f71f01 01371c12 01371d01 01371ea6 01371f40 02171c00 02171d01 02171e46 02171f40 02271c00 02271d01 02271ec6 02271f40>

 

The problem I noticed is if I change the port connection of the Digital Mic the speakers doesn't work

Link to comment
Share on other sites

Tested: AppleHDA.kext.M1530.Allports

 

Results **Bios says that the internal audio device is 9205 (more info available upon request)** / This kext works with both audio out, the first audio port has lower amplification than the second one. The external mic works. Internal mic doesn't work, it shows up as other device.

Link to comment
Share on other sites

Hey I added some values to the nodes, I don't know if you've tried them before but here you go. Can you test that out? That should be the proper setup for the mic, we just need to get the right pinconfig.

Info.plist.zip

 

 

I will do so tomorrow. Today I am swamped. I glanced through it and what I noticed is that you are using the 7 27 19 setup for the internal mic. Correct me if I am wrong..... thanks for the help.

Link to comment
Share on other sites

I think I'm reaching the conclusion that you have to utilize the DspFuncLib.kext located in the new AppleHDA.kexts to not only make the Mics work but to also get the sliders on any mic. As you can tell from the kext posted in The Kings post he references to the DSP lib in his layouts under mic to get his mics working. I think that's what has to be done for the M1530 and M1330. The only problem is getting it working just as he did. I was trying last night but I didn't have too much time to mess around. Macgirl I know you have gotten the FixKexts to work, I got them going last night but I can't seem to load them when I put them in a .kext that resembles The Kings.

 

I think if the above is the case we will have the internal mic going for this in no time.

 

Talisman, yes I did use 7 27 19. I used that because the ubuntu patch I post above has lead me to believe that this is the correct path.

 

I wish I could help more but I can't test my own kexts so bear with me here. We'll get you guys Internal Mic with the Slider

Link to comment
Share on other sites

gbonilla,

 

The fact that you're are willing to help at all is wonderful, no pressure at all on the speed at which stuff is being tested. Perhaps we can set up a time and date for you, macgirl, wingunr21, Talisman, and I to brainstorm and do some marathon kext testing if we want it done a bit sonner, or otherwise just continue as we have been and perhaps hope for the king to chime in.

Link to comment
Share on other sites

 Share

×
×
  • Create New...